Please use this identifier to cite or link to this item:
http://dspace.unimap.edu.my:80/xmlui/handle/123456789/1356
Full metadata record
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Noraishah Azman | - |
dc.date.accessioned | 2008-07-02T02:51:35Z | - |
dc.date.available | 2008-07-02T02:51:35Z | - |
dc.date.issued | 2007-03 | - |
dc.identifier.uri | http://dspace.unimap.edu.my/123456789/1356 | - |
dc.description | Access is limited to UniMAP community. | en_US |
dc.description.abstract | The degree to which deposited metals cover steps over topography is important to the yield and reliability of devices in very large scale integrations (VLSI). In evaporated and sputtered thin films, the most difficult steps to cover are those with straight walls. This is especially true with aluminum and its alloys. Metal to semiconductor contact step coverage has been studied as a function of evaporation process parameters. Contacts of different sizes, ranging from 5um to 20um have been designed and fabricated with the help of Electron Beam Lithography (EBL) system for high-resolution pattern transfer, using a standard CMOS process flow in Micro-fabrication Cleanroom Lab, UniMAP. Throughout the fabrication, wafers underwent the processes such as oxide deposition by PECVD, Lithography by EBL, wet and dry etches, photoresist stripping and so on. Aluminum was then deposited using thermal evaporator with varying process parameters. Characterization included grinding and polishing for cross sectioning, while high power microscope and scanning electron microscopy (SEM) techniques were employed for step coverage measurement. Experimental results shows that 20 μm metal step coverage is the only contact dimension can be investigated. The investigation is including the bottom step coverage and sidewall step coverage. | en_US |
dc.language.iso | en | en_US |
dc.publisher | Universiti Malaysia Perlis | en_US |
dc.subject | Very Large Scale Integration (VLSI) | en_US |
dc.subject | Electron Beam Lithography (EBL) | en_US |
dc.subject | Aluminium alloys | en_US |
dc.subject | Metal oxide semiconductors, Complementary | en_US |
dc.subject | Evaporation | en_US |
dc.subject | Semiconductor devices | en_US |
dc.subject | Integrated circuits | en_US |
dc.title | The Effect of Process Parameters on Metal Step Coverage for Aluminum by Evaporation Technique | en_US |
dc.type | Learning Object | en_US |
dc.contributor.advisor | Ramzan Mat Ayub (Advisor) | en_US |
dc.publisher.department | School of Microelectronic Engineering | en_US |
Appears in Collections: | School of Microelectronic Engineering (FYP) |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
Abstract, Acknowledgment.pdf | 110.07 kB | Adobe PDF | View/Open | |
Conclusion.pdf | 73.47 kB | Adobe PDF | View/Open | |
Introduction.pdf | 105.79 kB | Adobe PDF | View/Open | |
Literature review.pdf | 125.36 kB | Adobe PDF | View/Open | |
Methodology.pdf | 112.01 kB | Adobe PDF | View/Open | |
References and appendix.pdf | 103.48 kB | Adobe PDF | View/Open | |
Results and discussion.pdf | 1.32 MB | Adobe PDF | View/Open |
Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.