Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/13140
Full metadata record
DC FieldValueLanguage
dc.contributor.authorTan, Yan Ching-
dc.date.accessioned2011-07-11T01:47:41Z-
dc.date.available2011-07-11T01:47:41Z-
dc.date.issued2010-05-
dc.identifier.urihttp://dspace.unimap.edu.my/123456789/13140-
dc.descriptionAccess is limited to UniMAP community.en_US
dc.description.abstractLeaf of Orthosiphon stamineus was fermented or extracted with the distilled water and the extracts were subjected to qualitative and quantitative High Performance Liquid Chromatography (HPLC) analyses of the polyphenols, the most dominant chemical constituents in the leaf. An HPLC method was developed for the separation and determination of Rosmarinic acid (RA) in Orthosiphon stamineus. The separation system consisted of a C18 reversed-phase column, a gradient elution system of methanol/water containing orthophosphoric acid, and a photodiode array detector. The extraction with water extracts at 4 and 8 h gave a high yield of Rosmarinic Acid. There are literature review said that the concentration of active ingredient in the herbs may be lower than the dried herbs. The moisture content, drying rate, temperature, air circulation and drying time were controlled during the drying process since they can affect the drying process and the active compound in the herbs. Therefore, these parameters will be controlled and used to design the drying chamber for Orthosiphon stamineus.en_US
dc.language.isoenen_US
dc.publisherUniversiti Malaysia Perlisen_US
dc.subjectOrthosiphon stamineusen_US
dc.subjectMisai Kucing -- Tehen_US
dc.subjectMedicinal plantsen_US
dc.subjectDrying chamberen_US
dc.subjectHerb and herbal producten_US
dc.titleDetermination of the parameters in designing the drying chamber for Orthosiphon Stamineusen_US
dc.typeLearning Objecten_US
dc.contributor.advisorDr. Muhammad Syarhabil Ahmad (Advisor)en_US
dc.publisher.departmentSchool of Bioprocess Engineeringen_US
Appears in Collections:School of Bioprocess Engineering (FYP)

Files in This Item:
File Description SizeFormat 
Abstract, Acknowledgement.pdf78.11 kBAdobe PDFView/Open
Conclusion.pdf62.2 kBAdobe PDFView/Open
Introduction.pdf58.9 kBAdobe PDFView/Open
Literature review.pdf254.86 kBAdobe PDFView/Open
Methodology.pdf56.48 kBAdobe PDFView/Open
Reference and appendix.pdf768.43 kBAdobe PDFView/Open
Results and discussion.pdf276.9 kBAdobe PDFView/Open


Items in UniMAP Library Digital Repository are protected by copyright, with all rights reserved, unless otherwise indicated.