Collection's Items (Sorted by Submit Date in Descending order): 1 to 20 of 32
Issue Date | Title | Author(s) |
- | Effect of polyaniline loading, types of surface modifiers and secondary doping process on the properties of poly (vinyl chloride) / poly (ethylene oxide) / polyaniline conductive films | Azlin Fazlina, Osman, Dr. |
- | The effect of nickel, cobalt and tin on the evolution of microstructural and mechanical properties of Al-Zn-Mg-Cu alloys (7000 series) via casting, powder metallurgy and friction stir processing techniques | Kahtan S., Mohammed, Dr. |
- | Study on chitosan thin film for vapour sensor application | Irwana Nainggolan, Dr. |
- | Effect of acid treatment for reducing pores clogging in polyvinyl alcohol grinding stone | Noorina Hidayu, Jamil |
- | Potential of LUSI Mud as geopolymer material for artificial lightweight aggregate | Kamarudin, Hussin, Datuk Prof. Dr. |
- | Characterization and properties of natural rubber/styrene butadiene rubber/recycled acrylonitrile butadiene rubber (NR/SBR/rNBR) blends | Nik Noriman, Zulkepli, Dr. |
- | Chemical modification of palm kernel shell filled polylactic acid biocomposite flims | Lim Bee Ying, Dr. |
- | Preparation and characterization of linear low denstity polyethylene LLDPE/Thermoplastic Starch (TPS)/Banana fiber composites | Mohamad Kabar, Ab Wahab, Dr. |
2010 | Properties and biodegradability of waste paper foam filled Polyurethane foams composites | Dahlia, Zakaria; Salmah Husseinsyah, Dr. Ir. |
2007 | Corrosion behaviour on AA2014/15vol. %A1₂0₃P and AA2009/20vol. %SiCw composite after ageing treatment | Zamri, Yusoff; Shamsul Bahrin Jamaluddin, Prof. Madya Dr. |
2010 | Preparation and properties of Microcrystallinecellulose-fiber filled SBR/BR blends | Siti Salwa, Mohammad Shirajuddin; Hakimah Osman, Dr. |
2011 | Microstructure and properties of sintered Co-Cr-Mo alloy powder under different processing conditions | Zuraidawani, Che Daud; Prof. Dr. Shamsul Baharin Jamaludin |
2011 | Simulation and correlation of the melt flow characteristic using Polystyrene in usymmetrical cavity injection mold | Abdulla Mahmoud, Ahmed; Dr. Du Ngoc Uy Lan |
2015 | Tensile and thermal properties of elateriospermum tapos seed shells filled recycled polypropylene eco-composites | Muhamad Nadhli Amin, Lotfi; Assoc Prof Ir Dr Salmah Husseinsyah |
2015 | The effects of filler loading and coupling agents on properties of recycled high density Polyethylene/wood fiber composites | Mohd Hanif, Mohd Pisal; Assoc. Prof. Dr. Supri A. Ghani |
2015 | The effect of conductive fillers and poly (Ethylene Glycol) diglycidyl ether on the properties of poly (Vinyl Chloride)/Poly (Ethylene Oxide) conductive films | Siti Hajar, Mohd Din; Assoc. Prof. Dr. Supri A. Ghani |
2015 | Fabrication and characterization of hybrid microwave assisted sintering Sn-0.7Cu + 1.0wt.% Si₃N₄ composite solder | Flora, Somidin; Mohd Arif Anuar Mohd Salleh |
2013 | Development of Lead-Free Sn-0.7Cu-Si3N4 composite solders | Muhammad Hafiz, Zan @ Hazizi; Mohd. Arif Anuar Mohd. Salleh |
2014 | Studies of geopolymerization route for metakaolin geopolymeric materials | Liew, Yun Ming; Prof. Dr. Khairul Nizar |
17-Jul-2014 | Effect of palm ash composition to the brake pad application | Mohd Radzi, Ali; Prof. Dr. Shamsul Baharin Jamaludin |
Collection's Items (Sorted by Submit Date in Descending order): 1 to 20 of 32