Browsing School of Manufacturing Engineering (Articles) by Subject "Combustion"
Now showing items 1-5 of 5
-
The effect of radial swirl generator on reducing emissions from bio-fuel burner system
(Canadian Center of Science and Education, 2009-06)A liquid bio-fuel burner system with various radial air swirlers attached to combustion chamber of 280 mm inside diameter and 1000 mm length has been investigated. All tests were conducted using crude palm oil as fuel. A ... -
Experimental study on the production of CO-NO-HC emissions in the radial swirling flow combustion system
(Penerbit UTM Press, 2014)The main purpose of this paper is to evaluate the production of CO-NO-HC emissions while varying the swirl angle of curve vane radial swirler. Air swirler adds sufficient swirling to the inlet flow to generate central ... -
Numerical investigation of combustion performance utilizing envo-diesel blends
(Trans Tech Publications, 2013)Alternative fuel and renewable energy is needed to fulfill the energy demand of the world. The use of envo-diesel fuels for power generation seems a viable solution for the problems of decreasing fossil-fuel reserves and ... -
The reduction of noxious emissions using urea based on Selective Non-Catalytic Reduction in small scale bio fuel combustion system
(Canadian Center of Science and Education, 2011-04-02)Selective Non-Catalytic Reduction (SNCR) of oxides of nitrogen (NOx) was studied experimentally by injecting different concentrations of aqueous urea solution in a pilot-scale Bio-fuel fired tunnel furnace at 3-4 % ... -
The used of aqueous urea solution in reduction of noxious emissions in bio fuel combustion system using selective non-catalytic reduction
(Canadian Center of Science and Education (CCSE), 2011-08)Selective Non-Catalytic Reduction (SNCR) of nitric oxide was studied experimentally by injecting different concentrations of aqueous urea solution; urea and ammonia in a pilot-scale Bio-fuel fired tunnel furnace at 3-4 % ...