This page provides access to research works by Mohd Fidzwan Md Amin Hamzas currently a Lecturer of School of Manufacturing Engineering, Universiti Malaysia Perlis.

Recent Submissions

  • Minimization on warpage defect in injection molding part of ABS (Acrylonitrile Butadiene Styrene) material by using design of experiment (DOE) 

    Radhwan, Hussin; Mohd Fidzwan, Md Amin Hamzas; Ahmad Nabil, Mohd Khalil (Praise Worthy Prize, 2014-11)
    Every plastic part that undergoes the plastic injection molding process will have the behaviour of warpage when it has cooled after injection process. It needs a proper way of controlling the rate of warpage, so it is ...
  • Mathematical model of productivity with reliability and losses parameters for serial structure linear production automated flow line: a simulation analysis 

    Sin, Tan Chan; Usubamatov, Ryspek; Fairuz, M. A.; Mohd Fidzwan, Md. Amin Hamzas (Praise Worthy Prize, 2014)
    Industrial automated production flow line focus on productivity assessment and analysis since it present an important indicator of company profit and performance. Serial structure of production automated flow line widely ...
  • Engineering mathematical analysis method for productivity rate in linear arrangement serial structure automated flow assembly line 

    Chan Sin, Tan; Usubamatov, Ryspek; Fairuz, M.A. ,; Mohd Fidzwan, Md. Amin Hamzas; Kin Wai, Low (Hindawi Publishing Corporation, 2015-01-19)
    Productivity rate (Q) or production rate is one of the important indicator criteria for industrial engineer to improve the system and finish good output in production or assembly line. Mathematical and statistical analysis ...
  • Productivity theory for industrial automated lines 

    Usubamatov, Ryspek; Tan Chan, Sin; Mohd Fidzwan, Md. Amin Hamzas (American Society of Mechanical Engineers (ASME), 2013)
    The basic attributes of any industrial machines and systems are productivity rate and quality of products. Attributes of productivity are related to the theory of reliability let alone the theory of efficiency of machines. ...
  • The correlation between surface finish in milling process involving solid lubricant 

    Asmawi, Sanuddin; Zailani, Zainal Abidin; Mohd Fidzwan, Md Amin Hamzas; Hasnul, M. J.; Mohd Sabri, Hussin (Praise Worthy Prize, 2012-09)
    Nowadays solid lubricant assisted machining had now become a new tendency, it seems to play its potential implementation to replace previously applied conventional coolant fluid assisted machining. However, the application ...
  • Parameters investigation of mathematical model of productivity for automated line with availability by DMAIC methodology 

    Tan Chan, Sin; Ryspek, Usubamatov; Mohd Fidzwan, Md. Amin Hamzas; Low Kin, Wai; Teh Keat, Yao; Muhammad Syahril, Bahari (Hindawi Publishing Corporation, 2014)
    Automated line is widely applied in industry especially for mass production with less variety product. Productivity is one of the important criteria in automated line as well as industry which directly present the outputs ...
  • Machinability study of biocomposite: Palm oil based wax/LLDPE/Palm oil fiber blends for prototype application 

    Mohd Fidzwan, Md Amin Hamzas; Asmawi, Sanuddin; Mohd Sabri, Hussin; Zailani, Zainal Abidin; Ahmad Nabil, Mohd Khalil (Praise Worthy Prize, 2013-01)
    This paper is to find the possibility of developing a new blend composite in order to produce a prototype for engineering application. The new palm oil based wax is a waste material produced from palm oil refining process. ...
  • Design improvement of 'Air Remover Fan' to reduce temperature inside the car 

    Mohd Sabri, Hussin; Asmawi, Sanuddin; Zailani, Zainal Abidin; Mohd Fidzwan, Md Amin Hamzas (Praise Worthy Prize, 2013-05)
    The Air Remover Fan is a device that base on process of solving a temperature problem inside a car during parked under the direct sunlight or open area for a long period. When a car is parked for certain period in this ...
  • Bracket assembly tail failure: Identification of causes and proposal for design improvement 

    Mohd Sabri, Hussin; Mohd Fidzwan, Md Amin Hamzas; Asmawi, Sanuddin; Zailani, Zainal Abidin; Hasnul, M. J. (Praise Worthy Prize, 2012-01)
    This paper is aimed to identify and solve the problem faced by S. Y. Chong Foundry. A project has been assigned on this two wheel tractor. One of the problems has been found which is located on Rotavator Cover of Two Wheel ...
  • Application of continuous improvement in furniture manufacturing industry 

    Mohd Sabri, Hussin; Mohd Fidzwan, Md Amin Hamzas; Asmawi, Sanuddin; Zailani, Zainal Abidin (Praise Worthy Prize, 2013-01)
    This thesis documents a research on continuously improvement of process in EUROSPAN Furniture Sdn Bhd. The process improvement focused on dining table's assembly line. High product variety and flexibility become the main ...
  • A study on the effect of boric acid mixture as solid lubricant towards machining processes 

    Mohd Sabri, Hussin; Zailani, Zainal Abidin; Hadi, Hasnul A.; Asmawi, Sanuddin; Mohd Fidzwan, Md Amin (Praise Worthy Prize, 2012-11)
    Increasing awareness for 'green manufacturing' globally and consumer focus on environment friendly products has put major concerns on industries to minimize the use of cutting fluids. In this research, dry machining, ...
  • Process improvement on manufacturing floor through PDCA methodology 

    Mohd Sabri, Hussin; Asmawi, Sanuddin; Zailani, Zainal A.; Mohd Fidzwan, Md Amin; Hadi, Hasnul A. (Praise Worthy Prize S.r.l., 2012-11)
    Many organizations are struggling to improve customer-focused quality in today's highly competitive domestic and global markets. At the same time, these organizations have failed to implement the PDCA methodology into their ...
  • Investigation of core thickness undersized on composite panels 

    Mohd Sabri, Hussin; Zailani, Zainal Abidin; Asmawi, Sanuddin; Mohd Fidzwan, Md Amin Hamzas (Praise Worthy Prize S.r.l., 2013-01)
    The purpose of this study is to investigate the core thickness undersized problem which is very common with honeycomb core cutting. These defects occur during the honeycomb core cutting by using core block saw machine. ...
  • Design and development of a new vertical axis movable vane cavity wind turbine 

    Mohd Sabri, Hussin; Asmawi, Sanuddin; Zailani, Zainal A.; Hadi, Hasnul A.; Mohd Fidzwan, Md Amin Hamzas (Praise Worthy Prize, 2012)
    Wind Energy is one of the cleanest and reliable sources of renewable energy. Nowadays, wind energy generates about one percent of total energy used worldwide. The potential of wind energy is huge and the study shows if 20 ...
  • The effect of sintering duration on mechanical properties of Al/SiC composites 

    Asmawi, Sanuddin; Azmi, Harun; Mohd Sabri, Hussin; Zailani, Zainal Abidin; Mohd. Fidzwan, Md Amin Hamzas; Kartik, V. (Praise Worthy Prize S.r.l., 2013-11)
    Metal matrix composites (MMCs) have become attractive in a variety of applications due to its advantage of having intermediate properties between metal and ceramic. This paper presents the investigation of the effect of ...
  • Design and fabrication of a die for molding test press. 

    Mohd Sabri, Hussin; Mohd Fidzwan, Md Amin Hamzas; M. J., Hasnul; Zailani, Zainal Abidin; Asmawi, Sanuddin (Praise Worthy Prize S.r.l., 2012)
    This project aims to design and fabricate an die for molding test press. Mold Test Press Machine uses the concept of Compression Molding/Hot Press Molding. This project will be handled from the beginning of the design until ...
  • Development of improved bottleneck-based heuristic for re-entrant flow shop with dominant machine at M1 and M4 

    Mohd Fidzwan, Md Amin Hamzas; Ahmad Bareduan, Salleh; Liyana, Tajul; Mohd Sabri, Hussin; Zailani, Zainal Abidin; Hasnul, Hadi (Praise Worthy Prize S.r.l., 2012-03)
    This project investigates the possibility of developing scheduling heuristic using bottleneck approach for a four machine permutation re-entrant flow shop with the process routing of M1,M2,M3,M4,M3,M4 where M1 and M4 have ...
  • Performance evaluation of m3 bottleneck based heuristic for M1M2M3 flow shop 

    Mohd Fidzwan, Md Amin Hamzas; Ahmad Bareduan, Salleh; Mohd Sabri, Hussin; M. J., Hasnul; Asmawi, Sanuddin; Zailani, Zainal Abidin (Praise Worthy Prize S.r.l., 2012-09)
    This project investigates the possibility of developing scheduling heuristic using bottleneck approach for a three machine flow shop scheduling with the tendency of dominant machine at the first process. Due to the re-entrant ...
  • Study on ability of palm oil as viscosity index improvement (VII) additive in thermal stability (base mineral oil - Cooking palm oil) 

    Hasnul, Hadi; Liyana, Tajul; M. S., Hussin; Zailani, Zainal Abidin; Mohd Fidzwan, Md Amin Hamzas; Muhammad Syahril, Bahari (Praise Worthy Prize S.r.l., 2012)
    This research was conducted to study the thermal stability of cooking palm oil when subjected to heat in an attempt to study its ability as viscosity index improver. Four samples of mixture of Shell Rimula X SAE 40 engine ...
  • Classroom comfort ability assessment: A case study 

    Zailani, Zainal Abidin; R., Hamidon; Mohd Sabri, Hussin; Mohd Fidzwan, Md Amin Hamzas; Hasnul, Hadi (Praise Worthy Prize S.r.l., 2012-03)
    his study was conducted to evaluate the comfort level of an air-conditioned classroom at the School of Manufacturing Engineering campus using objective measurement, subjective assessment and Computational Fluid Dynamics ...