Search
Now showing items 1-10 of 18
Warpage analyses on thin plate in three-plate mold by Taguchi method and analysis of variance (ANOVA) for PC, ABS and PC/ABS
(Praise Worthy Prize S.r.l., 2012)
Warpage is a common issue in plastic injection molding process. It can get worse for thin parts and therefore it is more challenging for product design engineers, mold designers and manufacturing engineer to cope with ...
The influence of different mold temperature on warpage in a thin shallow injection molding process
(Praise Worthy Prize S.r.l., 2012)
Every injection molding parameter have its own influence towards the quality of an injection-molded part. Temperature, pressure and time are main parameters that typically highlighted in controlling the warpage defect of ...
Optimization on parameter settings in determining warpage factors of a side-gated thin shallow part injection molding for PP, ABS & PC+ABS materials
(Praise Worthy Prize S.r.l., 2012-05)
The injection molding process of thin shallow part requires several concerns in order to produce a quality output. In part of determining the best parameter settings, among other considerations that need to be taken are ...
Comparison between single and multi gates for minimization of warpage using taguchi method in injection molding process for ABS material
(Trans Tech Publications, 2013-12)
In this study, a mold is designed in single and dual type of gate in order to investigate the deflection of warpage for thick component in injection molding process. Autodesk Moldflow Insight software was used as a medium ...
Fire alarm system, portable fire extinguisher and hose real system maintenances for safety purpose and requirements
(Universiti Malaysia Perlis (UniMAP), 2009-12-01)
Fire Fighting system or equipments are important elements in building safety measures in order to ensure people’s safety when fire occurs. The Fire Alarm Systems
deserves the highest level of care and maintenance achievable. ...
Applications of HIRARC at UniMAP Laboratories
(Universiti Malaysia Perlis (UniMAP), 2009-12-01)
As a technical university which hands on practices are common to students, Universiti Malaysia Perlis (UniMAP) accommodates numbers of laboratories. From the basic fundamentals to the high-end laboratories, there might be ...
Strength of the weld line and warpage defects on the molded parts in injection molding process
(Praise Worthy Prize S.r.l., 2013)
Strength at weld the line location and warpage problem in injection molding plastic component were not new problems in injection molding industries. Many researchers had emerged with several improvement techniques to reduce ...
Formation and effect of lanthanum based-anodic coating on corrosion resistance of AZ31 magnesium alloy
(Universiti Malaysia Perlis (UniMAP), 2009-12-21)
Anodic coating by anodizing in solution consisting of Mg (N03>2 and/or La (N03)3 was conducted to commercial AZ31Mg alloy. Anodic films that formed were analyzed, and the corrosion resistances of the specimens against salt ...
Warpage optimization on ultra thin plate in three plate mold for PP, ABS & ABS+PC materials by using Taguchi method
(Praise Worthy Prize S.r.l., 2012-03)
The parameters setting of process conditions in injection molding process is very importance to ensure the quality of molded components is controlled by minimizing of any defects such as warpage. Various injection parameters ...