Now showing items 13-24 of 24

    • New Approach to Aluminium-Polymer Alloys 

      Mohd Ichwan, Nasution; Mohd Nasir, Zainal Arif, Prof.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Shamsul Baharin, Jamaludin, Assoc. Prof. Dr.; Faizul, Che Pa; Murizam, Darus; Che Idrus, Omar; Lee Liu Mei (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      New approach to aluminium-polymer alloys prepared by in-situ mixing or addition of molten metal onto polymer granules will be highlighted. This concept is simple and never been attempted before due to the thermal instability ...
    • Palm Ash as an Alternative Source for Silica Production 

      Faizul, Che Pa; Abdullah, Chik; Md. Fazlul, Bari (EDP Sciences, 2016)
      Agricultural wastes such as palm ash and rice husk have a possibility to be used as a useful renewable source for the production of silica (SiO2). Extensive researches have been carried out to extract silica from agricultural ...
    • Potential application of palm ash as a raw materials in production of green glass 

      Noorina Hidayu, Jamil; Mohd Mustafa Al Bakri, Abdullah; Faizul, Che Pa; Ruhiyuddin, Mohd Zaki; Murizam, Darus; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohamed Faisol, Mohamed Nor (Scientific.Net/Trans Tech Publications, 2012-12)
      Oil Palm Ash is one of the abundance agricultural wastes found in Malaysia. This wastes need to be disposed properly. Oil palm ash contains compounds needed to produce glass. Most of raw materials (especially silica) used ...
    • Potential application of palm ash as raw materials to produced green glass 

      Faizul, Che Pa; Noorina Hidayu, Jamil; Ruhiyuddin, Mohd Zaki; Murizam, Darus; S. Shahrizam; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohamed Faisol, Mohamed Nor (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      Oil Palm Ash is one of the abundance agricultural wastes found in Malaysia. This wastes need to be disposed properly. Oil palm ash contains compounds needed to produce glass. Most of raw materials (especially silica) used ...
    • Production of silicon carbide via grinding and heat treatment process 

      Noorina Hidayu, Jamil; Xian, W. Hui; Wan Mohd Arif, Wan Ibrahim; Faizul, Che Pa; Ruhiyuddin, Mohd Zaki (Trans Tech Publications, 2014)
      This study is to determine the properties and characterization of silicon carbide via grinding and heat treatment process. In this study, the raw materials used were waste glass and graphite powder. Silicon carbide was ...
    • Properties of Zinc alloy cast product with different composition of Silica Sand and Bentonite in Green Sand Mould 

      Zatil Alyani, Mohd Amin; Faizul, Che Pa; Mohd Ichwan, Nasution, P.M Ir. (Universiti Malaysia Perlis, 2009-12-01)
      This project is to produce tertiary alloy of Zinc-Aluminium-Magnesium (Zn-3Al-2Mg) with different composition of bentonite and silica sand in the green sand mould. Zn alloy casting industry using green sand molding is ...
    • Properties of zinc alloy in green sand casting 

      Zatil Alyani, Mohd Amin; Faizul, Che Pa; Mohd Ichwan, Nasution, Prof. Madya Ir. (Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)
      Zinc alloy casting industry using green sand molding is increasingly becoming to very competitive circumstance. So, this paper is to produce tertiary alloy of Zinc-Aluminium- Magnesium (Zn-3Al-2Mg) with different composition ...
    • Review of extraction of silica from agricultural wastes using acid leaching treatment 

      Faizul, Che Pa; Md Fazlul, Bari; Abdullah, C. (Trans Tech Publications, Switzerland, 2012-12)
      Large quantities of agricultural wastes such as palm ash and rice husk are found in Malaysia, have a large possibility to be employed as usefully renewable to produce energy and silica (SiO2). Extensive researches have ...
    • Role of clay (Bentonite) on mold making process in foundry metallurgy 

      Mohd Ichwan, Nasution; Mohd Nasir, Zainal Arif; Che Mohd Ruzaidi, Ghazali; Khairel Rafezi, Ahmad; Faizul, Che Pa; Mohd Fitri, Mohamad Wahid; Murizam, Darus (Universiti Kebangsaan Malaysia (UKM), 2008-12-03)
      The foundry engineer is usually familiar with the fact that there are different types of clay,such as kaolinite and montmorillonite (bentonite). The bonding action of kaolinite in moulding sands results from the free ionic ...
    • Self-Fluxing Mechanism in Geopolymerization for Low-Sintering Temperature of Ceramic 

      Faizul, Che Pa; Hasmaliza, Mohamad; Wan Mohd Arif, W. Ibrahim; Amonpattaratkit, Penphitcha; Gondro, Joanna; Sochacki, Wojciech; Norfadhilah, Ibrahim (MDPI AG, 2021-03-10)
      Kaolin, theoretically known as having low reactivity during geopolymerization, was used as a source of aluminosilicate materials in this study. Due to this concern, it is challenging to directly produce kaolin geopolymers ...
    • Study on Influence of Silicon Percentage on Flowability of Binary Aluminium-Silicon Alloy 

      Mohd Ichwan, Nasution, Ir.; Shamsul Baharin, Jamaludin, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Assoc. Prof.; Faizul, Che Pa (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      Study on flowability of liquid of binary aluminium-silicon with the difference percentage of silicon is carried out by using CO2 mold and with the spiral pattern. The result showed that flowability of molten metal of ...
    • Study on milling periods on the iron mill scale particle size and properties 

      Ruhiyuddin, Mohd Zaki; Faizul, Che Pa; Murizam, Darus; A. R. M., Nazri (Trans Tech Publications, 2013)
      The relations between the milling periods with the iron mill scale particle size have been studied. Iron mill scale has been chosen for this research due to the nature of itself, as a by-product. From this research, the ...