This page provides access to research works by Syed Nuzul Fadzli Syed Adam, currently a Lecturer of School of Materials Engineering, Universiti Malaysia Perlis (UniMAP).

Recent Submissions

  • Preparation and properties of porous calcium phosphate 

    Syed Nuzul Fadzli, Syed Adam; Ahmad Fauzi, Mohd Noor (Universiti Malaysia Perlis, 2008)
    In this study, preparation of porous calcium phosphate was involved the addition of sodium di-hydrogen phosphate, NaH2PO4 and di-sodium hydrogen phosphate, Na2HPO4 into the raw calcium phosphate powder. The sodium hydrogen ...
  • Flexural analysis of polyurethane foam and sandwich composite foam via experimental and finite element Cmethods 

    Firuz, Zainuddin, Dr.; Sahrim, Haji Ahmad; Rozaidi, Rasid; Syed Nuzul Fadzli, Syed Adam (Trans Tech Publications Inc., 2013-09)
    Polyurethane (PU)/montmorillonite (MMT) composite foam were synthesized with reaction of diisocyanate with polyester polyol by a batch process. In this research, water was used as the blowing agent with TEGOSTAB B8407 and ...
  • Preparation and characterizations of palm oil based rigid nanocomposite polyurethane foam 

    Firuz, Zainuddin, Dr.; Sahrim, Ahmad; Rozaidi, Rasid; Syed Nuzul Fadzli, Syed Adam (MASS Malaysia, 2010)
    The objective of this research is to study and analyze the basic and mechanical properties of polyurethane (PU) foam. PU foams were initially synthesized with reaction of natural oil polyol and isocyanate with ratio of ...
  • Sol-gel synthesis and preliminary characterizations of novel silica hybrid xerogels 

    Syed Nuzul Fadzli, Syed Adam; Roslinda, Shamsudin, Dr.; Firuz, Zainuddin (Trans Tech Publications, 2013-12)
    Hybrid silica xerogel mesoporous composite was synthesized by a mild temperature acid catalysed sol-gel route where a natural copolymer; sodium alginate (Na-COOH) together with calcium oxide (CaO) powder were incorporated ...
  • Sol-gel synthesis of novel silica hybrid xerogels : Porous studies 

    Syed Nuzul Fadzli, Syed Adam; Roslinda, Shamsudin, Dr.; Shahidan, Radiman, Prof. Dr.; Firuz, Zainuddin (Trans Tech Publications, 2014)
    Hybrid silica xerogel mesoporous composite was synthesized by a low temperature acid catalysed sol-gel route where a natural copolymer; sodium alginate (Na-COOH) together with calcium oxide (CaO) powder were incorporated ...
  • Drop weight impact analysis of laminated polyurethane foam/cloisite 30B clay 

    Firuz, Zainuddin; Hazizan, Md Akil; Sahrim, Hj Ahmad, Prof. Dr.; Rozaidi, Rasid; Syed Nuzul Fadzli, Syed Adam (Trans Tech Publications, 2014-01)
    Laminated polyurethane foam composite was produced by incorporating Cloisite 30B clay as filler and aluminium sheet as the skin. Initially, PU foams were synthesized with reaction of natural oil polyol and isocyanate with ...
  • Development of dense Hydroxyapatite from natural and synthetic sources 

    Sri Asliza, Amin; S. A., Abu Bakar; Azlin Fazlina, Osman; Syed Nuzul Fadzli, Syed Adam; Norsuria, Mahmed; Mohd Zaheruddin, Kasmuin (University Malaysia Perlis (UniMAP), 2007-06-09)
  • Effect of rice husk additions on the final composition of fired kaolinite ceramic 

    Azlin Fazlina, Osman; Syed Nuzul Fadzli, Syed Adam (Universiti Sains Malaysia (USM), 2007-04-11)
    During production of rice, huge amounts of rice husks are left as abundant waste product. Rice husk is usually disposed off by combustion and this contributes to environmental problem due to the air and water pollution. ...
  • The Effect of Porosity on Thermal Conductivity of Silicon Carbide Filled Polyproplyene Composite 

    Azlin Fazlina, Osman; Banjuraizah, Johar; Syed Nuzul Fadzli, Syed Adam; Sri Asliza, Md Amin; Amirro, Osman (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
    Silicon carbide filled Polypropylene (PP) composites are fabricated, where the compounding is carried out by using Z-blade mixer with filler loadings of 0wt%, 10wt%, 20wt% and 30wt%. Composite sheets produced from hot press ...
  • Flexural Properties and Thermal Conductivity of Aluminium Nitride Filled Polypropylene Composite 

    Azlin Fazlina, Osman; Banjuraizah, Johar; Syed Nuzul Fadzli, Syed Adam; Sri Asliza, Md Amin; Firdaus, Abd Rahman; Lee, Lay Sin (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
    Aluminium Nitride (AlN) filled Polypropylene (PP) composites are fabricated, where the compounding is carried out by using Z- blade mixer with filler loadings of 0wt%, 10wt%, 20wt% and 30wt%. Composite sheets produced from ...