Search
Now showing items 1-9 of 9
Comparison study in consolidation of yttria reinforced iron-chromium composites using conventional and microwave sintering technique
(Trans Tech Publications, 2014)
This research is focused on studying the density and mechanical properties of iron-chromium composites consolidated by innovative rapid microwave sintering technology against conventionally sintered counterparts using slow ...
Characterization of PM Fe-Cr-Y₂O₃ composites prepared by microwave sintering technology
(Trans Tech Publications, 2014-01)
This research is focused on assessing the feasibility of the new and innovative microwave sintering technology for fabricating iron-chromium composites prepared via powder metallurgy route. Accordingly, the microwave ...
Characteristic and corrosion studies of rare earth (REE) based anodizing on AZ91D magnesium alloy
(Trans Tech Publications, 2014-01)
Oxide coatings on AZ91D magnesium alloy were prepared using anodizing technique with 10mA/cm2 current density for 5 minutes in electrolyte containing Mg (NO₃)₂ with NaVO₃ as an additive. The corrosion behaviors of different ...
Electrodeposited ZnO-nanowire/Cu2O photovoltaic device with highly resistive ZnO intermediate layer
(American Chemical Society, 2014-07)
Cl-doped ZnO-nanowire (Cl:ZnO-nws)/Cu2O photovoltaic devices were prepared by electrodeposition in aqueous solutions, and the effects of the insertion of the highly resistive ZnO (i-ZnO) layer has been demonstrated by an ...
Mechanical properties of microwave sintered 60YSZAl₂0₃/10HAP bioceramics composites
(Trans Tech Publications, 2014)
Microwave heating technology promising shorter processing times and less energy consumption beneficial for economic perspective with improved properties and better microstructural control. This study focussed on microwave ...
Photon-assisted electrochemical construction of <0001>-n-ZnO/<111>-p-Cu2O photovoltaic devices with intermediate TiO2 layer
(The Electrochemical Society (ECS), 2014-10)
The <111>-Cu2O/<0001>-ZnO photovoltaic (PV) device has been constructed by a photon-assisted electrochemical reaction in aqueous solutions, and the effect of the insertion of the TiO2 layer prepared by a sol-gel technique ...
Characterization of oxide film by vanadium based anodic oxidation coating
(Trans Tech Publications, 2014-06)
An oxide film was prepared on AZ91D magnesium alloy by anodizing in solution containing sodium metavanadate (NaVO3). The corrosion resistance of the AZ91D magnesium alloy was investigated at fixed current density 10 mA/cm2 ...
Bioactivity behavior of YSZ-Al2O3/10HAP bioceramics composites in simulated body fluid
(Trans Tech Publications Ltd, 2014-06)
Yttria-stabilized zirconia and alumina made significant contributions to the development of health care industry, specifically as orthopedic and dental materials. Both bioceramics are nearly inert ceramics, as they do not ...
A study on biocompatibility of gadolinium based anodizing coating AZ91D magnesium alloy in Simulated Body Fluid (SBF) solution
(Trans Tech Publications, 2014-06)
Pure Mg and AZ91D alloy was anodized with and without the gadolinium nitrate Gd(NO3)3 in different concentrations (0.001g/l, 0.025g/l, 0.05g/l, 0.075g/l and 0.09g/l) at a constant current density and treatment time of ...