Search
Now showing items 1-10 of 37
Review on fly ash-based geopolymer concrete without portland cement
(Universiti Malaysia Perlis (UniMAP), 2010-10-16)
This paper summarizes the factors that affect the properties of fly ash-based geopolymer concrete. Alkaline activator is an important material that controls the properties of geopolymer concrete. The workability of fresh ...
Fly ash porous material using geopolymerization process for high temperature exposure
(MDPI AG (Basel, Switzerland), 2012-04)
This paper presents the results of a study on the effect of temperature on geopolymers manufactured using pozzolanic materials (fly ash). In this paper, we report on our investigation of the performance of porous geopolymers ...
Microstructural analysis of geopolymer and ordinary Portland cement mortar exposed to sulfuric acid
(Revista De Materiale Plastice, 2013-09)
The vulnerability of ordinary Portland cement (OPC) concrete to acidic attack is a worrying subject regarding the future durability of this binder. On the other side of binder's technology, the new technology of cement ...
Effect of curing regimes on metakaolin geopolymer pastes produced from geopolymer powder
(Scientific.Net/Trans Tech Publications, 2012-12)
The properties of metakaolin geopolymer paste are affected by the alkali concentration, the initial raw materials, solidification process, and amount of mixing water as well as the curing conditions. This study aimed to ...
Strength and microstructural properties of mechanically-activated kaolin geopolymers
(Trans Tech Publications, 2012-12)
Kaolin geopolymers exhibit low strength properties due to its plate-like nature which contribute to smaller surface area for geopolymerization reactions. Layered kaolin structure only allows very little, if any, substitution ...
Mechanical performances of fly ash geopolymer bricks
(American Scientific Publishers, 2013-01)
Geopolymer is a new class of three-dimensionally networked amorphous to semi-crystalline alumino-silicate materials, and first developed by Professor Davidovits in 1978. Geopolymers can be synthesized by mixing alumino-silicate ...
Lightweight fly ash-based geopolymer concrete
(Trans Tech Publications, 2013)
The experiments of this study were preformed to study the synthesis process for lightweight aggregate geopolymer concrete (LWAGC) using normal sand as a fine aggregate and expanded clay as lightweight aggregate. The LWAGC ...
Mechanical and microstructural evaluations of lightweight aggregate geopolymer concrete before and after exposed to elevated temperatures
(MDPI, Basel, Switzerland, 2013)
This paper presents the mechanical and microstructural characteristics of a lightweight aggregate geopolymer concrete (LWAGC) synthesized by the alkali-activation of a fly ash source (FA) before and after being exposed to ...
Study on fly ash based geopolymer for coating applications
(Trans Tech Publications, 2013)
Geopolymer is cementitious binders that do not require the presence of ordinary Portland cement (OPC). Fly ash with geopolymer formulations prepared with mixing alumino-silicate with the alkaline activator solution has ...
Optimization of alkaline activator / fly ash ratio on the compressive strength of manufacturing fly ash-based geopolymer
(Trans Tech Publications, 2012)
Fly ash and a mixture of alkaline activators namely sodium silicate (Waterglass) and sodium hydroxide (NaOH) solution were used for preparing geopolymer. The aim of this research is to determine the optimum value of the ...