Now showing items 131-150 of 281

    • Kajian keberkesanan promosi Universiti Malysia Perlis tahun 2007 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Prof. Dato' Dr.; Julinawati, Suanda; Che Mohd. Ruzaidi, Prof Madya; Abdul Aziz, Mahmudin (Universiti Malaysia Perlis (UniMAP)Jabatan Hal Ehwal Pelajar & Alumni (JHEPA), 2008-08)
    • Kaolin Geopolymer as precursor to ceramic formation 

      Nur Ain, Jaya; Mohd Mustafa Al Bakri, Abdullah; Che Mohd Ruzaidi, Ghazali; Mohammed, Hussain; Kamarudin, Hussin; Romisuhani, Ahmad (EDP Sciences, 2016)
      This paper introduced the potential application of kaolin geopolymer as ceramic precursor. This is one of the alternatives to produce high strength ceramic at a slightly lower temperature. Upon sintering the conversion of ...
    • Kaolin-based geopolymers with various NaOH concentrations 

      Heah, Cheng Yong; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohamed, Bnhussain, Prof. Dr.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Liew, Yun Ming (Springer Verlag, 2013-03)
      Kaolin geopolymers were produced by the alkali-activation of kaolin with an activator solution (a mixture of NaOH and sodium silicate solutions). The NaOH solution was prepared at a concentration of 6-14 mol/L and was mixed ...
    • Kejohanan Badminton Jemputan UniMAP 2009 

      Mohd Mustafa Al-Bakri, Abdullah (Universiti Malaysia Perlis, 2009-12)
    • Kejohanan Bola Tampar Terbuka UiTM Arau 

      Mohd Mustafa Al Bakri, Abdullah (Kolej Universiti Kejuruteraan Utara Malaysia, 2005-04)
    • Kejohanan Olahraga Terbuka POAPs 

      Mohd Mustafa Al-Bakri, Abdullah (Universiti Malaysia Perlis, 2009-12)
    • Kejohanan Olahraga Tertutup UniMAP 2008 

      Mohd Mustafa Al Bakri, Abdullah (Universiti Malaysia Perlis, 2008-03)
    • Kejohanan Sukan Staf Antara Universiti Malaysia Ke-30 

      Mohd Mustafa Al Bakri, Abdullah (Kolej Universiti Kejuruteraan Utara Malaysia, 2005-06)
    • Laser cutting of coronary stents: Progress and development in laser based stent cutting technology 

      Noorhafiza, Muhammad; Mohd Mustafa Al Bakri, Abdullah; Mohd Shuhidan, Saleh; Li, Lin (Trans Tech Publications Ltd., 2015)
      Laser cutting is one of the key fabrication technologies applied to coronary stent manufacture. This paper reviews the recent progress in laser-based stent manufacturing, including different type of lasers used, laser ...
    • Lawatan ke-2 KMUTT ke UniMAP meterai 2 projek kerjasama 

      Mohd Mustafa Al Bakri, Abdullah; Mohd Hafeez Nordin (Universiti Malaysia Perlis, 2008-08)
    • Lightweight fly ash-based geopolymer concrete 

      Omar A., Abdulkareem; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Prof. Madya Dr. (Trans Tech Publications, 2013)
      The experiments of this study were preformed to study the synthesis process for lightweight aggregate geopolymer concrete (LWAGC) using normal sand as a fine aggregate and expanded clay as lightweight aggregate. The LWAGC ...
    • Lightweight Heat Resistant Geopolymer-based Materials Synthesized from Red Mud and Rice Husk Ash Using Sodium Silicate Solution as Alkaline Activator 

      Hoc Thang, Nguyen; Trung Kien, Pham; Mohd Mustafa Al Bakri, Abdullah (EDP Sciences, 2017)
      Geopolymer is an inorganic polymer composite with potentials to replace Ordinary Portland Cement (OPC)-based materials in the future because of its lower energy consumption, minimal CO2 emissions and lower production cost ...
    • Machining performance of reinforced alumina insert in end milling of AISI 1018 steel 

      Mohd Nor Hakim, Hassan; Mohammad Ikhwan Zaini, Ridzwan; Zainal Arifin, Ahmad, Prof.; Mohd Mustafa Al Bakri, Abdullah; Azman, Ahmad Bakir; Mazlan, Mohamed (Trans Tech Publications, 2013-09)
      The main goal of this work is to investigate the performance of zirconia toughened alumina (ZTA) and ZTA reinforced with magnesium oxide (MgO) used as cutting insert in end milling of AISI 1018 steel with hardness of 27 ...
    • Magnetic properties of rapid cooled FeCoB based alloys produced by injection molding 

      Nabiałek, M.; Jeż, B.; Jeż, K.; Pietrusiewicz, P.; Gruszka, K.; Bloch, K.; Gondro, J.; Rzącki, J.; Mohd Mustafa Al Bakri, Abdullah; Sandu, A. V.; Szota, M. (IOP Publishing Ltd, 2018-06)
      The paper presents the results of investigations of the structure and magnetic properties of massive rapid cooled Fe₅₀₋ₓCo₂₀₊ₓB₂₀Cu₁Nb₉ alloys (where x = 0, 5). Massive alloys were made using the method of injecting a ...
    • Majlis Anugerah Sukan KUKUM '03 

      Mohd Mustafa Al Bakri, Abdullah (Kolej Universiti Kejuruteraan Utara Malaysia, 2004-03)
    • Malaysia Open Master Althletic Championship 2009 

      Mohd Mustafa Al Bakri, Abdullah (Universiti Malaysia Perlis, 2009-12)
    • Malaysian Foxtail grass - A potential source of natural/agro fibre for polymer composite panel 

      Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Norazian, Mohamed Noor; Rafiza, Abdul Razak; Zarina, Yahya (Trans Tech Publications, 2013)
      Foxtail grass, also known as 'rumput bulu' by the local people, is one of the fast growing grasses abundantly available all over Malaysia. A full grown Foxtail grass attains a height of about 0.5 - 1.5 meters. The fibres ...
    • Manufacturing of fire resistance geopolymer: a review 

      Ikmal Hakem, Aziz; Mohd Mustafa Al Bakri, Abdullah; Heah, Cheng Yong; Liew, Yun Ming; Kamarudin, Hussin; Aeslina, Abdul Kadir; Emy Aizat, Azimi (EDP Sciences, 2016)
      Protection against fire using inorganic polymer is a new application of engineering technology. Even though, there are varieties of fire-protection materials, there is always a need for the development of new materials ...
    • Mean imputation techniques for filling the missing observations in air pollution dataset 

      Noorazian, Mohamed Noor; Ahmad Shukri, Yahaya, Prof. Madya; Nor Azam, Ramli, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah (Trans Tech Publications, 2014)
      Almost all real life datasets consist missing values. These are usually due to machine failure, routine maintenance, changes in siting monitors and human error. The occurence of missing values requires special attention ...
    • Mechanical and microstructural evaluations of lightweight aggregate geopolymer concrete before and after exposed to elevated temperatures 

      Omar A., Abdulkareem; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Mohamed, Bnhussain, Prof. Dr. (MDPI, Basel, Switzerland, 2013)
      This paper presents the mechanical and microstructural characteristics of a lightweight aggregate geopolymer concrete (LWAGC) synthesized by the alkali-activation of a fly ash source (FA) before and after being exposed to ...