Now showing items 21-40 of 72

    • The effect of curing time on the properties of fly ash-based geopolymer bricks 

      Wan Mastura, W. I.; Kamarudin, Hussin, Brig. Jen. Datuk Prof. Dr.; Khairul Nizar, Ismail, Prof. Madya Dr.; Mohd Mustafa Al Bakri, Abdullah; Mohammed, Bnhussain (Scientific.Net/Trans Tech Publications, 2012-12)
      This paper reports the results of an experimental work conducted to investigate the effect of curing conditions on the properties of fly ash-based geopolymer bricks prepared by using fly ash as base material and combination ...
    • The Effect of Different Ratio Bottom Ash and Fly Ash Geopolymer Brick on Mechanical Properties for Non-loading Application 

      Laila Mardiah, Deraman; Mohd Mustafa Al Bakri, Abdullah; Liew, Yun Ming; Kamarudin, Hussin; Wan Mastura, Wan Ibrahim; Andrei Victor, Sandu (EDP Sciences, 2017)
      This paper studies the finding of strength and water absorption of geopolymer bricks using bottom ash and fly ash as a geopolymer raw material for non-loading application with minimum strength. The study has been conducted ...
    • Effect of fly ash/alkaline activator ratio and sodium silicate/NaoH ratio on fly ash geopolymer coating strength 

      Liyana, Jamaludin; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Azura, Abdul Rashid Assoc. Prof. (Trans Tech Publications, 2013)
      Fly ash geopolymer coating material potential used to protect surface used in exposure conditions. Ratio of fly ash/alkaline activator and Na₂SiO₃/NaOH play important parameter on determining the best flexural strength of ...
    • Effect of Glass Reinforced Epoxy (GRE) pipe filled with Geopolymer Materials for Piping Application: Compression Properties 

      Mohammad Firdaus, Abu Hashim; Mohd Mustafa, Al Bakri Abdullah; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin; Mohammed, Binhussain; Mohd Firdaus, Omar (EDP Sciences, 2016)
      The aim of this paper is to achieve the highest compressive strength of glass reinforced epoxy pipe with the geopolymer filler content of weight percentage that were used in glass reinforced epoxy pipe. The samples were ...
    • The Effect of High Temperature on Compression Strength of Geopolymer Paste 

      Ridho, Bayuaji; Sigit, Darmawan; Nur Ahmad, Husin; Boedi, Wibowo; Srie, Subekti; Januarti Jaya, Ekaputri; Mohd Mustafa Al Bakri, Abdullah; Totok, Ruki Biyanto (EDP Sciences, 2017-02)
      This research has a purpose to confirm the resistance of geopolymer concrete towards high temperature. This high temperature becomes the issues in material structure defense due to the danger of fire. Therefore, this ...
    • Effect of NaOH concentration on microstructure of boiler ash based geopolymer 

      Zarina, Yahya; Mohd Mustafa, Al Bakri Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Abdul Rahim, Abdul Razak (Trans Tech Publications Ltd., 2015)
      Boiler ash is one of the waste material from palm oil processing industry and it was widely available. The role of alkaline activator in geopolymer is important for its mechanical properties. NaOH and sodium silicate ...
    • Effect of Solids-To-Liquids, Na2SiO3-To-NaOH and Curing Temperature on the Palm Oil Boiler Ash (Si + Ca) Geopolymerisation System 

      Zarina, Yahya; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin; Khairul Nizar, Ismail; Rafiza, Abd Razak; Sandu, Andrei Victor (MDPI AG, 2015)
      This paper investigates the effect of the solids-to-liquids (S/L) and Na2SiO3/NaOH ratios on the production of palm oil boiler ash (POBA) based geopolymer. Sodium silicate and sodium hydroxide (NaOH) solution were used as ...
    • Effect on strength and hardness of clay ceramic substrate after treatment using koalin based geopolymer glaze 

      Mohd Mustafa Al Bakri, Abdullah; Liyana, Jamaludin; Muhammad Faheem, Mohd Tahir; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya; Alida, Abdullah (Trans Tech Publications, 2014)
      Geopolymerization is an alternative for ceramic industry by using clay based material such as kaolin or calcined kaolin geopolymer. Geopolymer paste is initially produced by alkaline activation of calcined kaolin with NaOH ...
    • The effects of various concentrations of NaOH on the inter-particle gelation of a fly ash geopolymer aggregate 

      Alida, Abdullah; Kamarudin, Hussin; Mohd Mustafa Al Bakri, Abdullah; Zarina, Yahya; Sochacki, Wojciech; Rafiza, Abd Razak; Błoch, Katarzyna; Hamzah, Fansuri (MDPI AG, 2021-02)
      Aggregates can be categorized into natural and artificial aggregates. Preserving natural resources is crucial to ensuring the constant supply of natural aggregates. In order to preserve these natural resources, the production ...
    • Evaluation of the effect of silica fume on amorphous fly ash geopolymers exposed to elevated temperature 

      Li, Ong Huey; Yun-Ming, Liew; Cheng-Yong, Heah; Ridho, Bayuaji; Mohd Mustafa Al Bakri, Abdullah; Loong, Foo Kai; Jin, Tan Soo; Teng, Ng Hui; Nabiałek, Marcin; Jeż, Bartłomiej; Yong Sing, Ng (MDPI AG, 2021-01)
      The properties of amorphous geopolymer with silica fume addition after heat treatment was rarely reported in the geopolymer field. Geopolymer was prepared by mixing fly ash and alkali activator. The silica fume was added ...
    • Feasibility of producing wood fibre-reinforced geopolymer composites (WFRGC) 

      Mohd Mustafa Al Bakri, Abdullah; Mohd Izzat, Ahmad; Muhammad Faheem, Mohd Tahir; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Mohamed, Bnhussain, Prof. Dr.; Rafiza, Abdul Razak; Zarina, Yahya; Liyana, Jamaludin (Trans Tech Publications, 2013)
      Wood fibres have long been known as a fibre reinforcement for concrete. Due to its availability and low production cost, this natural fibre has been used in less developed country where conventional construction materials ...
    • Fire resistance evaluation of lightweight geopolymer concrete system exposed to elevated temperatures of 100-800 °C 

      Omar A., Abdulkareem; Mohd Mustafa Al-Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr. (Trans Tech Publications, 2014)
      This paper reports the fire resistance property of a lightweight aggregate geopolymer concrete (LWAGC) material synthesized by the alkali-activation of locally source fly ash (FA) after exposed to elevated temperatures ...
    • Fly ash porous material using geopolymerization process for high temperature exposure 

      Mohd Mustafa Al Bakri, Abdullah; Liyana, Jamaludin; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain; Che Mohd Ruzaidi, Ghazali, Prof. Madya; Mohd Izzat, Ahmad (MDPI AG (Basel, Switzerland), 2012-04)
      This paper presents the results of a study on the effect of temperature on geopolymers manufactured using pozzolanic materials (fly ash). In this paper, we report on our investigation of the performance of porous geopolymers ...
    • Fly ash-based geopolymer lightweight concrete using foaming agent 

      Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohamed, Bnhussain; Khairul Nizar, Ismail, Prof. Madya Dr.; Zarina, Yahya; Rafiza, Abdul Razak (MDPI, Basel, Switzerland., 2012-06)
      In this paper, we report the results of our investigation on the possibility of producing foam concrete by using a geopolymer system. Class C fly ash was mixed with an alkaline activator solution (a mixture of sodium ...
    • Influence of dolomite on the mechanical properties of boiler ash geopolymer paste 

      Zarina, Yahya; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Rafiza, Abdul Razak (Trans Tech Publications, 2014)
      The waste material from palm oil industry has been increasing since Malaysia was the world largest exported of palm oil mill. The waste such as palm fibers, nut shells, palm kernel and empty fruit bunches are the solid ...
    • Investigating the possibility of utilization of kaolin and the potential of metakaolin to produce green cement for construction purposes-A review 

      Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Liew, Y. M.; Mohd Mustafa Al Bakri, Abdullah; Luqman, Musa, Dr.; Khairul Nizar, I.; Heah, Cheng Yong (INSInet Publication, 2011-09)
      Geopolymers are inorganic alkali aluminosilicate gels, formed from reaction of mineral clays or aluminosilicate-bearing industrial wastes, and treated with alkali silicate solution at 40-80°C. Geopolymers have been studied ...
    • Kaolin Geopolymer as precursor to ceramic formation 

      Nur Ain, Jaya; Mohd Mustafa Al Bakri, Abdullah; Che Mohd Ruzaidi, Ghazali; Mohammed, Hussain; Kamarudin, Hussin; Romisuhani, Ahmad (EDP Sciences, 2016)
      This paper introduced the potential application of kaolin geopolymer as ceramic precursor. This is one of the alternatives to produce high strength ceramic at a slightly lower temperature. Upon sintering the conversion of ...
    • Lightweight fly ash-based geopolymer concrete 

      Omar A., Abdulkareem; Mohd Mustafa Al Bakri, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairul Nizar, Ismail, Prof. Madya Dr. (Trans Tech Publications, 2013)
      The experiments of this study were preformed to study the synthesis process for lightweight aggregate geopolymer concrete (LWAGC) using normal sand as a fine aggregate and expanded clay as lightweight aggregate. The LWAGC ...
    • Lightweight Heat Resistant Geopolymer-based Materials Synthesized from Red Mud and Rice Husk Ash Using Sodium Silicate Solution as Alkaline Activator 

      Hoc Thang, Nguyen; Trung Kien, Pham; Mohd Mustafa Al Bakri, Abdullah (EDP Sciences, 2017)
      Geopolymer is an inorganic polymer composite with potentials to replace Ordinary Portland Cement (OPC)-based materials in the future because of its lower energy consumption, minimal CO2 emissions and lower production cost ...
    • Manufacturing of fire resistance geopolymer: a review 

      Ikmal Hakem, Aziz; Mohd Mustafa Al Bakri, Abdullah; Heah, Cheng Yong; Liew, Yun Ming; Kamarudin, Hussin; Aeslina, Abdul Kadir; Emy Aizat, Azimi (EDP Sciences, 2016)
      Protection against fire using inorganic polymer is a new application of engineering technology. Even though, there are varieties of fire-protection materials, there is always a need for the development of new materials ...