Browsing Nur Maizatul Shima, Adzali, Dr. by Subject "Powder metallurgy"
Now showing items 1-6 of 6
-
Characterization of F75-HAP produced by Powder Metallurgy method
(Universiti Malaysia Perlis, 2009-12-01)This research was carried out to study the properties of Co-Cr-Mo filled with different composition of HAP that have been prepared by powder metallurgy method. The raw materials used in this research were Co-Cr-Mo powder ... -
Effect of sintering environment to the physical properties of Al/calcined dolomite composite
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)Composites of pure aluminum with calcined dolomite powders of <65□m in size were prepared by mechanical milling. Fabrication involves the mixing of reinforcement particles with the metallic powder followed by consolidation ... -
Effects of Magnesium addition on corrosion behaviour of Al-Mg composite fabricated using Powder Metallurgy method
(Universiti Kebangsaan Malaysia (UKM), 2008-12-03)The study was focusing the effects of magnesium addition on corrosion behaviour of PM Al composite. The corrosion behaviour between PM Al composite reinforced with short fibres alumina Saffil™ with and without 2 wt% of ... -
Microstructure and in-vitro test bioactivity behavior of Co-Cr-Mo (F-75)/hydroxyapatite in phosphate buffered saline solution
(Technical University of Košice, 2014)Cobalt based alloys were the first metallic materials successfully used in orthopedic applications. However, these alloys are bioinert, it is necessary to make them bioactive in the human body to improve their application ... -
Physical properties of Al/Calcined Dolomite Metal Matrix composite by Powder Metallurgy Route
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)Calcined dolomite is dolomite powder that had been calcined at high temperature. This paper describes the fabrication of aluminum metal matrix composite reinforced with calcined dolomite by powder metallurgy route. The ... -
Synthesis and characterization of pure magnesium/bio-glass composite
(Trans Tech Publications, 2013)In this study, bio-glass 45S5 powder was added to pure magnesium powder to produce the magnesium/bio-glass composite by powder metallurgy method. The composite was synthesized based on 5 wt. %, 10 wt. % and 15 wt. % of ...