Search
Now showing items 1-10 of 11
General properties of kaolin geopolymers
(American Scientific Publishers, 2013-01)
This paper reported the properties of kaolin geopolymers in term of the bulk density, compressive strength, qualitative observation and SEM analysis of the kaolin geopolymers. Kaolin geopolymers were synthesized through ...
FTIR and XRD characterization of kaolin geopolymer based on solids-to-liquid and alkaline activator ratios
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)
This paper covers the results of X-ray powder diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) in assessing the phase identification and functional group of kaolin geopolymer based on the different ...
Strength and microstructural properties of mechanically-activated kaolin geopolymers
(Trans Tech Publications, 2012-12)
Kaolin geopolymers exhibit low strength properties due to its plate-like nature which contribute to smaller surface area for geopolymerization reactions. Layered kaolin structure only allows very little, if any, substitution ...
Kaolin-based geopolymers with various NaOH concentrations
(Springer Verlag, 2013-03)
Kaolin geopolymers were produced by the alkali-activation of kaolin with an activator solution (a mixture of NaOH and sodium silicate solutions). The NaOH solution was prepared at a concentration of 6-14 mol/L and was mixed ...
Influence of oxide molar ratios on kaolin geopolymers
(American Scientific Publishers, 2013-12)
Oxide molar ratios are the main key parameter determining the performance of a kaolin geopolymers. The kaolin composition and various mixture proportions will lead to different oxide molar ratios in geopolymer system. In ...
Investigating the possibility of utilization of kaolin and the potential of metakaolin to produce green cement for construction purposes-A review
(INSInet Publication, 2011-09)
Geopolymers are inorganic alkali aluminosilicate gels, formed from reaction of mineral clays or aluminosilicate-bearing industrial wastes, and treated with alkali silicate solution at 40-80°C. Geopolymers have been studied ...
Effect of alkali concentration on mechanical properties of kaolin geopolymers
(Procema SA, 2012)
Alkali concentration is the most significant factor in geopolymerization process that must be taken into consideration during the synthesis of kaolin geopolymers. The kaolin geopolymers were prepared by mixing kaolin and ...
Study on solids-to-liquid and alkaline activator ratios on kaolin-based geopolymers
(Elsevier Ltd., 2012-10)
Kaolin and alkali activator were mixed with the solids-to-liquid ratios in range of 0.60-1.20 (Al 2O 3/Na 2O molar ratio of 0.63-1.27). Sodium silicate and sodium hydroxide ranged between 0.16 and 0.36 (SiO 2/Na 2O molar ...
Effect of mechanical activation on kaolin-based geopolymers
(Trans Tech Publications, 2012)
Raw materials kaolin was subjected to mechanical modification; the effect of the mechanical activation of kaolin on the compressive strength and morphological properties of the geopolymers has been studied. Mechanical ...
Curing Behavior on kaolin-based geopolymers
(Trans Tech Publications, Switzerland., 2012)
This paper aims at investigating the influence of curing process on kaolin-based geopolymers. Kaolin-based geopolymers were prepared by the alkali-activation of kaolin with alkali activating solution (mixture of NaOH and ...