Du Ngoc Uy Lan, Dr.
Browse by
This page provides access to research works by Dr. Du Ngoc Uy Lan, currently a Lecturer of School of Materials Engineering, Universiti Malaysia Perlis (UniMAP).
News
Skills and Expertise:Material Characterization,Materials Engineering,Composites,Polymer Chemistry,Polymer Composites,Polymer Rheology,Epoxy Resins,Injection Molding,Rubber,Foams and Double Emulsion W/O/W O/W/O
Recent Submissions
-
Preparation of poly(methyl methacrylate) and polystyrene composite-filled porous epoxy microparticles via in-situ suspension polymerization
(Elsevier, 2011)Both poly(methyl methacrylate) (PMMA) and polystyrene (PS) were synthesized through suspension polymerization, and porous epoxy microparticles (PEMP) were incorporated in-situ during polymerization. It was discovered that ... -
Porous epoxy microparticles prepared by an advanced aqueous method
(Elsevier, 2011)This paper reports the synthesis of emulsions of epoxy compounds with various ratios of epoxy, polyamide and calcium carbonate by homogenization in water at room temperature. The emulsion is cured at 80 °C, and during ... -
Production of novel epoxy micro-balloons
(Elsevier, 2009)Epoxy micro-balloons are prepared by dropping and stirring of epoxy mixture in heated silicon oil. The mixture of epoxy, curing agent and blowing agent forms sphere particles, which are then blown via the function of blowing ... -
Properties of recycled high density polyethylene/recycled polypropylene blends : Effect of maleic anhydride polypropylene
(Trans Tech Publications, 2014)Polymer blending provides an efficient way to develop new materials with improved properties while preserve the primary properties of the materials at lower cost. The blends recycled high density polyethylene (rHDPE) and ... -
The effects of extraction mediums on the properties of porous epoxy using natural rubber latex as void template
(Trans Tech Publications, 2013)Porous epoxy was fabricated by using natural rubber latex particles as the void template which were extracted after by different types of extraction mediums such of distilled water and toluene under ultrasonic. As expected, ... -
Effect of mixing sequences on the properties of porous epoxy using toluenea as a soaking medium
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)The effect of mixing sequences on the properties of the porous epoxy was investigated. Mechanical stirring technique was used to produce porous epoxy. The latex content was evaluated from 0.5 to 2 phr. The first series ... -
Effect of interlocking between porous epoxy microparticles and elastomer on mechanical properties and deformation modes
(Elsevier Ltd., 2012-10)To investigate the interlocking capability of porous epoxy microparticles (PEM) with elastomers, composites of PEM and ENR/NR were prepared on a two-roll mill. A proprietary method was used to produce the PEM, which have ...
RSS 1.0