Browsing Mohd Nazree Derman, Assoc. Prof. Dr. by Title

Now showing items 42-61 of 66

    • High temperature corrosion behaviour of steel with a Carbonate deposit at 1123K 

      Habsah, Md Ishak; Mohammed Misbahul, Amin; Nazree, Derman; Khairul Rafezi, Ahmad (School of Materials Engineering, 2007)
      The high temperature corrosion behavior of A1S1 304 austenitic stainless steel and S45C carbon steel were studied in presence with CaCO3 salt at 1123K for 24,48,72, 96 and 120 hour. The studies were carried out to determine ...

    • Highly response and sensitivity Chitosan-Polyvinyl alcohol based Hexanal sensors 

      Nur Zuraihan, Abd Wahab; Irwana, Nainggolan; Tulus Ikhsan, Nasution; Mohd Nazree, Derman; Devi, Shantini (EDP Sciences, 2016)
      This work is to study the sensing properties of chitosanpolyvinyl alcohol film sensors upon hexanal gas exposure using vapour sensing technique. The sensor fabrication process was done using electrochemical deposition ...

    • Impedance study on Mg Sacrificial anode for soil corrosion protection 

      Zulkifli Zainon (Universiti Malaysia PerlisSchools of Materials Engineering, 2008-05)
      Sacrificial anode is one of the methods that usually applied in soil corrosion protection especially magnesium (Mg) based anode. This study is focuses on high-potential Mg anode and pure Mg anode. The value of open-circuit ...

    • Influence of Activated Carbon Particles on Intermetallic Compound Growth Mechanism in Sn-Cu-Ni Composite Solder 

      Mohd Izrul Izwan, Ramli; ‪Mohd Arif Anuar, Mohd Salleh; Mohd Nazree, Derman; Rita, Mohd Said; Norainiza, Saud (EDP Sciences, 2016-10)
      The influence of Activated Carbon (AC) particles on mechanical properties of Sn-Cu-Ni-xAC solder joint was investigated. Five different Activated Carbon (AC) percentage addition (0 wt. %, 0.25 wt. %, 0.5 wt. %, 0.75 wt. ...

    • An investigation of TiO2 addition on microstructure evolution of Sn-Cu-Ni solder paste composite 

      Norainiza, Saud; Rita, Mohd Said; Mohd Arif Anuar, Mohd Salleh; Mohd Nazree, Derman; Mohd Izrul Izwan, Ramli; Norhayanti, Mohd Nasir (EDP Sciences, 2016)
      In this research, varying fraction of titanium oxide (TiO2) reinforcement particles was successfully incorporated into Sn-Cu-Ni solder paste in an effort to study the influence of TiO2 addition on microstructure evolution ...

    • Mechanical properties of various composition of Aluminum Matrix composite 

      Kamrosni, Abdul Razak; Mohd Nazree, Derman; Noraziana, Parimin; Rita, Mohd Said (Universiti Malaysia Perlis, 2009-12-01)
      The various composition of alumina will affect the mechanical properties of aluminum matrix composite. The properties that affect were density, percentage of porosity, arrangement of the microstructure and also the hardness. ...

    • Microstructural characterization of ZrO2 layer coating on martensitic stainless steel 

      Siti Hawa, Mohd Salleh; Mohd. Zaidi, Omar, Prof. Madya Dr.; Mohd Nazree, Derman, Dr.; Salmie Suhana, Che Abdullah (Trans Tech Publications, 2012)
      High carbon steel stainless steel such as 440C martensitic stainless steel, are commonly used for automotive components, such as ball bearings, races, gage blocks and valve. In this study, 440C steel was coated with ZrO2 ...

    • Microstructure and in-vitro test bioactivity behavior of Co-Cr-Mo (F-75)/hydroxyapatite in phosphate buffered saline solution 

      Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Maizatul Shima, Adzali; Mohd Nazree, Derman, Dr. (Technical University of Košice, 2014)
      Cobalt based alloys were the first metallic materials successfully used in orthopedic applications. However, these alloys are bioinert, it is necessary to make them bioactive in the human body to improve their application ...

    • Multiwall carbon nanotubes functionalized by nitric acid studied by using FTIR and RAMAN spectroscopy 

      Shahidah Arina, Shamsuddin; Nur Hamidah, Abdul Halim; Mohd Nazree, Derman; Uda, Hashim, Assoc. Prof. Dr.; Mohamad Rusop (Universiti Malaysia Perlis (UniMAP), 2012-06-18)
      Multiwall Carbon Nanotubes (MWCNT) was treated with nitric acid in order to increase the purified yield and also to get carboxylic groups (COOH) attached on the MWCNT wall surfaces for further applications. The existence ...

    • Organic dye degradation with TiO2 catalyst/AAO template in the presence of H2O2 

      Alaba Oladeji, Araoyinbo; Mohd Nazree, Derman, Dr.; Azmi, Rahmat, Prof.; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2013)
      In this study, anodic aluminum oxide (AAO) fabricated from phosphoric acid electrolyte at ambient temperature was used as the porous template, while a sol gel procedure was used for the preparation of the TiO2 sol with the ...

    • Overview of pathogenic micro-organisms destruction in contaminated water by oxide photocatalysis 

      Noor Azira, Mohd Noor; Muhammad Asri, Idris, Dr.; Dewi Suriyani, Che Halin, Dr.; Mohd Nazree, Derman, Dr.; Mohd Arif Anuar, Mohd Salleh (Trans Tech Publications, 2013)
      The titanium dioxide (TiO2) is a semiconductor oxide photocatalys, which is chemically and biologically inert but exhibits excellent photolytic activity in the ultraviolet (UV) region. Progress in photocatalytic water ...

    • Potentiodynamic polarization of Mg-0.22ca alloys containing minor element of Aluminium 

      Shaiful Rizam, Shamsudin; Mohd Nazree, Derman; C.I., Mahdi; Azmi, Kamardin; Abd. Razak, Daud; Mazlee, Mohd Noor; A.M.H., Firdaus; G., Sasirehka (Universiti Malaysia Perlis, 2009-12-01)
      Mg alloys played a significant role in replacing the existing sacrificial anodes. To maintain the negative potential and its capability in preventing corrosion, Ca and Al was added as alloying elements. Polarization curves ...

    • Preliminary study of hap addition to Co-Cr-Mo alloy fabricated by powder metallurgy method 

      Nur Maizatul Shima, Adzali; Shamsul Baharin, Jamaludin; Mohd Nazree, Derman; Nur Hidayah, Ahmad Zaidi (SIRIM, 2010-11-22)
      This preliminary study of HAP addition in Co-Cr-Mo (F-75) was carried out by powder metallurgy method. The lab work comprises the mixing of Co-Cr-Mo with different HAP (hydroxyapatite) composition which varied from 0 wt. ...

    • A simple one-step anodising method for the synthesis of ordered porous anodic alumina 

      Voon, Chun Hong; Mohd Nazree, Derman, Dr.; Uda, Hashim, Prof. Dr.; Khairel Rafezi Ahmad, Dr.; Ho, Li Ngee (Taylor & Francis, 2014)
      Porous anodic alumina (PAA) has been produced on aluminium substrate by single-step anodising at 50 V in 0.3 M oxalic acid at 15°C for 60 min. The highly ordered pore and cell structure was achieved by subjecting the PAA ...

    • Study of anodised PM Aluminium matrix composite reinforced with 15 wt % Saffil Alumina short fibre 

      Mohd Nazree, Derman; Zainal Arifin, Ahmad; Luay Bakir, Hussian; Nurulakmal, Mohd Sharif (Malaysian Institute for Nuclear Technology Research (MINT), Xapp Malaysia-MNS & Universiti Kebangsaan Malaysia (UKM), 2006-11-29)
      A study of wear behaviour on anodised PM aluminium matrix composites (AMC) reinforced with Saffil™ alumina short fibres was done. AMC was fabricated by powder metallurgy methods (PM) with using Al flake powders and Saffil™ ...

    • A study of hardcoat anodizing on PM Al-Mg composite 

      Mohd Nasuha Ab. Halim (University Malaysia PerlisSchool of Materials Engineering, 2008-05)
      This research is being conducted to investigate an effect occurring on anodizing process on powder metallurgy Aluminium-Magnesium (PM Al-Mg) composite. Composite materials are fabricated by using powder metallurgy method ...

    • Study of wear on anodised PM Aluminium Matrix composite reinforced with 15 wt % Saffil Alumina Short Fibre 

      Mohd Nazree, Derman; Zainal Arifin, Ahmad; Luay Bakir, Hussain; Nurulakmal, Mohd Sharif (Universiti Malaysia Perlis, 2007-06-09)
      A study of wear behaviour on anodised powder metallurgy aluminium matrix composites (PM AMC) reinforced with Saffil™ alumina short fibres was done. AMC was fabricated by powder metallurgy methods (PM) with using Al flake ...

    • A study on the effect of modified electrolyte to the formation of AAO membrane in anodising process 

      Juyana, A Wahab; Muhamad Nur, Misbah; Nurul Diyana, Jamil; Mohd Nazree, Derman (Trans Tech Publications, 2013)
      The formation of anodic aluminium oxide (AAO) membrane in anodising process has been studied. The anodising process was done in two different type of electrolyte which are single phosphoric acid and a mixture of phosphoric ...

    • Study the effect of TIO2 and soaking time to the natural hydroxyapatite properties 

      Shahrizal, M. H.; Sri Asliza, Md Amin; Mohd Nazree, Derman; Mohd Zaheruddin, Kasmuin (Universiti Sains Malaysia (USM), 2006-05-24)
      Natural hydroxyapatite has potential to be used as implant material in biomedical applications. In this study natural HA were obtained from bovine bone by heated and ground into desired size. Dense natural HA were fabricated ...

    • Surface morphology and corrosion behavior of electrolytic coatings in different aqueous solutions 

      Siti Hawa, Mohamed Salleh; Mohd Nazree, Derman, Dr.; Mohd Zaidi, Omar; Rohaya, Abdul Malek (Trans Tech Publications, 2014)
      ZrO₃/AI₂O₃, AI₂O₃/Y₂O₃, ZrO₂/Y₂O₃ coatings were applied on SS440C steel substrates via an electrolytic double layer coating process. The effect of these different ceramic aquecous solutions on the surface morphology and ...