Browsing Mazlee Mohd Noor, Assoc. Prof. Dr. by Author "sbaharin@unimap.edu.my"
Now showing items 1-15 of 15
-
Development and properties of coconut fiber reinforced composite cement with the addition of fly ash
Nur Izzati, Muhd Nadzri; Mazlee, Mohd Noor, Dr.; Shamsul, Baharin Jamaludin, Prof. Dr. (Taylor and Francis, 2012)In this paper, the effectiveness utilization of agricultural wastes and industrial wastes in the composite cement has been studied in terms of physical and mechanical properties. Twenty weight percent of fly ash and 80 wt.% ... -
The development of cement composites reinforced coconut fiber with fly ash addition: mechanical properties and fracture behaviour
Mazlee, Mohd Noor, Dr.; Shamsul, Baharin Jamaludin, Prof. Dr.; Nur Izzati, Muhd Nadzri (Trans Tech Publications, 2013)This research paper presents a study on the development of cement composites reinforced coconut fiber with fly ash addition. Various content of coconut fiber (3 wt. %, 6 wt. %, 9 wt. %, 12 wt. % and 15 wt. %) was added to ... -
Effect of heating rate on microstructure and properties of the iron-chromium reinforced with alumina particle produced via microwave sintering
Shamsul, Baharin Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Rahman, W (Praise Worthy Prize, 2013)The application of microwave sintering to metallic materials offers better mechanical properties over conventional sintering method. In this paper, the effect of heating rate on the microstructure and properties of the ... -
Effect of spot welding current and cycles on the mechanical properties of welded galvanized steel sheets
Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Muhammad Rifki, Ismail; Khairel Rafezi, Ahmad, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)Studies on the effects of welding current and cycles were carried on the galvanized steel sheets using spot welding. The welding currents used were 3 kA, 5 kA 6 kA and the welding cycles were 4, 6 and 8. Tensile shear and ... -
Effects of fly ash addition on compressive strength and flexural strength of foamed cement composites
Roshasmawi, Abdul Wahab; Mazlee, Mohd Noor, Dr.; Shamsul, Baharin Jamaludin, Prof. Dr.; Khairul Nizar, Ismail, Dr. (Trans Tech Publications, 2013)In this study, the mixing of polystyrene (PS) beads and fly ash as a sand replacement material in foamed cement composites (FCC) has been investigated. Specifically, the mechanical properties such as compressive strength ... -
The effects of fly ash and polystyrene bead additions on compressive strength of foamed cement composites
Mazlee, Mohd Noor, Dr.; Key, Tan Pei; Shamsul Baharin, Jamaludin, Prof. Dr.; Roshasmawi, Abdul Wahab; Nur Izzati, Muhd Nadzri; Alida, Abdullah (Trans Tech Publications, 2013)The effects of both additions of fly ash and polystyrene (PS) beads were studied on compressive strength of foamed cement composites. The increasing amount of fly ash addition up to 6 wt. % has been found to increase the ... -
The effects of superheating treatment on distribution of eutectic silicon particles in A357-continuous stainless steel composite
Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin, Prof. Dr. (Trans Tech Publications, 2013)In the present study, superheating treatment has been applied on A357 reinforced with 0.5 wt.% (Composite 1) and 1.0 wt.% (Composite 2) continuous stainless steel composite. In Composite 1, the microstructure displayed ... -
Fabrication and characterization of porous F-75 for potential application in tissue engineering
Shamsul Baharin, Jamaludin, Prof. Dr.; Tan, Wei Leng; Nur Hidayah, Ahmad Zaidi; Zuraidawani, Che Daud; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2013)Porous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at ... -
Fly ash as Sand Replacement Material (SRM) in the development of composite cement: Physical and mechanical properties
Nur Izzati, Muhd Nadzri; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd. Noor (Universiti Malaysia Perlis (UniMAP), 2012-06-18)There has been vast research enhancing the usage of industrial wastes in engineering applications. This research paper reports the effect of fly ash on the physical and mechanical properties of composite cement. Fly ash ... -
Mechanical properties of dissimilar welds between stainless steel and mild steel
Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Shahzan Kamarul, A. Kadir; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2013)Joining of stainless steel type 304 to mild steel was carried out using a gas tungsten arc welding (GTAW). Samples were welded using stainless steel welding electrode: (AWS: E308l-16) and mild steel welding electrode: (AWS: ... -
Metal Implant
Shamsul Baharin, Jamaludin, Prof. Dr; Mazlee, Mohd Noor, Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Nurhidayah, Ahmad Zaidi (Malaysian Invention and Design Society (MINDS), 2006-05-19)This research product is cobalt-chromium metal implant produced by powder metallurgy technique. -
Microwave sintering of pure iron with addition of stearic acid as binder
Wan Abdul Rahman Assyahid, Wan Ibrahim; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2012)The purpose of this study is to investigate the effect of the stearic acid as binder in sintering pure iron using a microwave furnace. The study was focused in mechanical properties such as porosity, density and micro-hardness ... -
Optimization of sintering temperature on microwave sintering of the composite iron-chromium reinforced with alumina particles
Wan Abdul Rahman Assyahid, Wan Ibrahim; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2014-01)Microwave sintering technology has become attractive and gained interest among material researchers due its capability and advantages over conventional sintering. Since two decades ago, intensive researches on microwave ... -
Sand replacement materials (SRM) in sustainable cement composites; A concise review
Madzura, Mohamad; Mazlee, Mohd Noor, Dr.; Shamsul Baharin, Jamaludin, Prof. Dr. (Trans Tech Publications, 2013)This paper presents a short review of research works on the development of sustainable cementitious matrix composites with addition of potential mineral wastes as sand replacement materials. The study emphasizes on the ... -
Sustainable porous materials for gas adsorption applications; A concise review
Wai, Hoong Chan; Mazlee, Mohd Noor, Dr.; Zainal Arifin, Ahmad, Prof.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Azlan, Mohd Ishak, Prof. Madya Dr; Muhammad Shahar, Jusoh, Dr. (Trans Tech Publications, 2013)Many new sustainable porous materials were developed for gas adsorption applications. Common materials such as activated carbon, clay materials and metal organic framework (MOF) that utilized as potential porous adsorption ...