Browsing Mazlee Mohd Noor, Assoc. Prof. Dr. by Issue Date
Now showing items 21-39 of 39
-
Microwave sintering of pure iron with addition of stearic acid as binder
(Trans Tech Publications, 2012)The purpose of this study is to investigate the effect of the stearic acid as binder in sintering pure iron using a microwave furnace. The study was focused in mechanical properties such as porosity, density and micro-hardness ... -
Compressive strength and crack propagation of cement composites reinforced coconut fibre
(Medwell Journals, 2012)This study presents the compressive strength and crack propagation of cement composites reinforced coconut fibre. The development of cement composites in this research were done by substituting coconut fibre to the portion ... -
Mechanical properties and fracture behaviour of coconut fibre-based green composites
(Foundation for Materials Science and Engineering “Serban Solacolu”, 2012)This paper presents the influence of natural fibre content on the mechanical properties of coconut fibre based-green composites. The mixture ratio of cement:sand by weight was fixed at 1:1. Coconut fibre was used as ... -
Development and properties of coconut fiber reinforced composite cement with the addition of fly ash
(Taylor and Francis, 2012)In this paper, the effectiveness utilization of agricultural wastes and industrial wastes in the composite cement has been studied in terms of physical and mechanical properties. Twenty weight percent of fly ash and 80 wt.% ... -
Fly ash as Sand Replacement Material (SRM) in the development of composite cement: Physical and mechanical properties
(Universiti Malaysia Perlis (UniMAP), 2012-06-18)There has been vast research enhancing the usage of industrial wastes in engineering applications. This research paper reports the effect of fly ash on the physical and mechanical properties of composite cement. Fly ash ... -
Static X-ray scans on the titanium hydride (TiH2) powder during dehydrogenation
(Trans Tech Publications, 2013)This work investigates the dehydrogenation of TiH2 powder during isothermal heating at 600°C using the static x-ray scans of high temperature x-ray diffraction (XRD). As-received TiH2 powder with a particle size of 5 μm ... -
Mechanical properties of dissimilar welds between stainless steel and mild steel
(Trans Tech Publications, 2013)Joining of stainless steel type 304 to mild steel was carried out using a gas tungsten arc welding (GTAW). Samples were welded using stainless steel welding electrode: (AWS: E308l-16) and mild steel welding electrode: (AWS: ... -
Effect of spot welding current and cycles on the mechanical properties of welded galvanized steel sheets
(Trans Tech Publications, 2013)Studies on the effects of welding current and cycles were carried on the galvanized steel sheets using spot welding. The welding currents used were 3 kA, 5 kA 6 kA and the welding cycles were 4, 6 and 8. Tensile shear and ... -
Fabrication and characterization of porous F-75 for potential application in tissue engineering
(Trans Tech Publications, 2013)Porous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at ... -
Sustainable porous materials for gas adsorption applications; A concise review
(Trans Tech Publications, 2013)Many new sustainable porous materials were developed for gas adsorption applications. Common materials such as activated carbon, clay materials and metal organic framework (MOF) that utilized as potential porous adsorption ... -
Sand replacement materials (SRM) in sustainable cement composites; A concise review
(Trans Tech Publications, 2013)This paper presents a short review of research works on the development of sustainable cementitious matrix composites with addition of potential mineral wastes as sand replacement materials. The study emphasizes on the ... -
The development of cement composites reinforced coconut fiber with fly ash addition: mechanical properties and fracture behaviour
(Trans Tech Publications, 2013)This research paper presents a study on the development of cement composites reinforced coconut fiber with fly ash addition. Various content of coconut fiber (3 wt. %, 6 wt. %, 9 wt. %, 12 wt. % and 15 wt. %) was added to ... -
Effect of heating rate on microstructure and properties of the iron-chromium reinforced with alumina particle produced via microwave sintering
(Praise Worthy Prize, 2013)The application of microwave sintering to metallic materials offers better mechanical properties over conventional sintering method. In this paper, the effect of heating rate on the microstructure and properties of the ... -
The effects of fly ash and polystyrene bead additions on compressive strength of foamed cement composites
(Trans Tech Publications, 2013)The effects of both additions of fly ash and polystyrene (PS) beads were studied on compressive strength of foamed cement composites. The increasing amount of fly ash addition up to 6 wt. % has been found to increase the ... -
Effects of fly ash addition on compressive strength and flexural strength of foamed cement composites
(Trans Tech Publications, 2013)In this study, the mixing of polystyrene (PS) beads and fly ash as a sand replacement material in foamed cement composites (FCC) has been investigated. Specifically, the mechanical properties such as compressive strength ... -
The effects of superheating treatment on distribution of eutectic silicon particles in A357-continuous stainless steel composite
(Trans Tech Publications, 2013)In the present study, superheating treatment has been applied on A357 reinforced with 0.5 wt.% (Composite 1) and 1.0 wt.% (Composite 2) continuous stainless steel composite. In Composite 1, the microstructure displayed ... -
Failure investigation on rusty mesh strainer of petrochemical plant
(Trans Tech Publications, 2013)The wire material of filter mesh is made of 304 grade stainless steel. The failure to run properly was due to the impact of burst and torn. The client also expects that the failure was due to corrosion problems. A visual ... -
Different concentration of Al(No₃)₃ In Zro₂/Al₂o₃ double layer coating steel prepared by electrolytic method
(Trans Tech Publications, 2014)Stainless steels, such as 440C steel are commonly used for engineering applications. The high carbon contents of this steel have significantly been attributed to low corrosion resistance properties. Surface modification ... -
Optimization of sintering temperature on microwave sintering of the composite iron-chromium reinforced with alumina particles
(Trans Tech Publications, 2014-01)Microwave sintering technology has become attractive and gained interest among material researchers due its capability and advantages over conventional sintering. Since two decades ago, intensive researches on microwave ...