Browsing Nik Noriman Zulkepli, Assoc. Prof. Ts. Dr. by Issue Date
Now showing items 21-40 of 61
-
Thermal properties of linear-low density polyethylene (LLDPE)/soya spent powder blends with the addition of epoxidised natural rubber
(Trans Tech Publications, 2013)Soya spent powder as an inexpensive and renewable source has been used as a filler for linear-low density polyethylene (LLDPE) in this study. Linear-low density polyethylene (LLDPE)/soya spent powder composites were prepared ... -
Effect of carbon black/silica hybrid filler on thermal properties, fatigue life, and natural weathering of SBR/recycled NBR blends
(Taylor and Francis Group, LLC, 2013-03)The utilization of nitrile glove waste will spark a great deal of interest in the rubber industry in developing cost-effective techniques to convert waste and used rubber into a processable form. Blends of styrene butadiene ... -
Thermal properties of different recycled acrylonitrile-butadiene rubber glove (NBRr) size and its blend ratios on SBR/NBRr blends
(Trans Tech Publications, 2013-09)The effects of SBR/NBRr blends on thermal properties of such thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) were carried out. Results showed that by incorporating the smallest size NBRr ... -
Comparison of mechanical properties of polypropylene/acrylonitrile butadiene rubber/rice husk powder composites modified with silane and acetic anhydride compound
(Trans Tech Publications, 2013-09)Polypropylene(PP)/Acrylonitrile butadiene rubber(NBRr)/rice husk powder(RHP) composites was fabricated with silane and acetic anhydride treatment agent. The in- situ formed RHP filled PP/NBRr composites were prepared by ... -
Tensile properties and FTIR analysis of HDPE/soya spent powder in oven aging
(AENSI Publisher All rights reserved, 2013-10)This investigation involves pure HDPE and then HDPE with addition of soya spent powder with different weight percentagesbefore and after exposing in the oven aging. The characteristics of pure HDPE and HDPE/ soya spent ... -
Natural rubber/styrene butadiene rubber/recycled nitrile glove (NR/SBR/rNBRg) ternary blend: Tensile properties & morphology
(AENSI Publisher All rights reserved, 2013-10)Recycling waste rubber products by utilising them in rubber blends had provided the simplest and most cost-effective ways in solving several environmental issues regarding the abundance of scrap rubbers. Discarded nitrile ... -
The tensile properties and morphology analysis of recycled mattress filled natural rubber compounds
(AENSI Publisher All rights reserved, 2013-10)The tensile properties and morphology analysis of Recycled Mattress (rMat) filled Standard Malaysian Rubber (SMR L) and Epoxidized Natural Rubber (ENR 50) was successfully studied. The both compounds were prepared by two ... -
The effects of carbon black and calcium carbonate as a filler on cure characteristic and physical properties of SBR/CRr blends
(Trans Tech Publications, 2013-12)Filler are compounding ingredients added to a rubber compound for the purpose of iether reinforcing or cheapening the compound. Despite that, fillers can also be used to modify the physical properties of both unvulcanized ... -
Properties of natural rubber/ethylene propylene diene monomer/recycled latex catheter (NR/EPDM/rLC) ternary blends: Cure characteristics and hardness
(Trans Tech Publications, 2013-12)Currently, the recycled rubber widely being used in rubber technology. Due to difficulty on reprocessing techniques, the vulcanized rubbers being a big problem in the recycled field. One of the main forms of discharge ... -
Physical and morphological properties of styrene butadiene rubber/recycled chloroprene rubber (SBR/CRr) blends - The effects of TOR as a compatibilizer
(Trans Tech Publications, 2014)The effects of physical and morphological properties of TOR as a compatibilizer of styrene butadiene rubber/recycled chloroprene rubber (SBR/CRr) blends were investigated. Blends. Both uncompatibilised and compatibilised ... -
Natural rubber/styrene butadiene rubber/recycled nitrile glove (NR/SBR/rNBRg) ternary blend: Curing characteristics and swelling test
(Trans Tech Publications, 2014)Curing characteristics and swelling behavior of natural rubber/styrene butadiene rubber/recycled nitrile glove (NR/SBR/rNBRg) blends were investigated. Eleven composition ratio; 50/50/0, 50/40/10, 50/30/20, 50/20/30, ... -
The influence of CB, silica and CaCO₃ on tensile and morphological properties of vPE/rPE/EPDM blends
(Trans Tech Publications, 2014)The virgin polyethylene (vPE) and recycled polyethylene (rPE) was melt blended with ethylene propylene diene terpolymer (EPDM) in different ratio by using a Haake Rheomix at 180°C and 50 rpm were prepared. The characterization ... -
Tensile and morphological properties of low density polyethylene/ spear grass composites
(Trans Tech Publications, 2014)The spear grass content on the tensile properties, morphology of low-density polyethylene (LDPE)/spear grass was investigated. The compatibilising effect of epoxidised natural rubber (ENR 50) LDPE and spear grass was mixed ... -
The effects of dynamic vulcanization in virgin polyethylene (vPE)/ recycled polyethylene (rPE)/ ethylene propylene diene terpolymer (EPDM) blends: Tensile properties and morphology
(Trans Tech Publications, 2014)The effects of dynamic vulcanisation in vPE/rPE/EPDM blends were studied. The discarded polyethylene used in the study was obtained from local cable manufacturers. The effects of different sulfur loading on the tensile ... -
The influence of cure characteristics and crosslink density of virgin acrylonitrile butadiene rubber/recycled acrylonitrile butadiene rubber (vNBR/rNBR) blends
(Trans Tech Publications, 2014)Cure characteristics and crosslink density of virgin acrylonitrile butadiene rubber/recycled acrylonitrile butadiene rubber (vNBR/rNBR) blends were studied. Three different size ranges of rNBR particles, i.e., 150 - 350 ... -
Shrinkage analysis on thick plate part using Response Surface Methodology (RSM)
(EDP Sciences, 2016)The work reported herein is about an analysis on the quality (shrinkage) on a thick plate part using Response Surface Methodology (RSM). Previous researches showed that the most influential factor affecting the shrinkage ... -
Analysis of shrinkage on thick plate part using genetic algorithm
(EDP Sciences, 2016)Injection moulding is the most widely used processes in manufacturing plastic products. Since the quality of injection improves plastic parts are mostly influenced by process conditions, the method to determine the optimum ... -
Effect of particle size on mechanical properties of Sawdust-High density Polyethylene composites under various strain rates
(North Carolina State University, 2016)There is a need to understand the effect of wood particle size, as it affects the characteristics of wood-based composites. This study considers the effect of wood particle size relative to the dynamic behavior of wood ... -
The influence of Rice Husk Fiber on The Properties of Epoxidized Natural Rubber/Rice Husk Compounds
(EDP Sciences, 2016)In this work, curing characteristics, tensile and physical properties of epoxidized natural rubber/ rice husk (ENR-50/RH) compounds were investigated. Different RH loading (10, 20, 30, 40 and 50 Phr) and size (fine size ... -
Thermal properties of ethyl vinyl acetate (EVA)/ montmorillonite (MMT) nanocomposites for biomedical applications
(EDP Sciences, 2016)The viability of nanocomposites comprising Ethyl Vinyl Acetate (EVA) filled montmorillonite (MMT) nanoclay as candidate materials of biomedical devices was investigated. EVA/MMT nanocomposites were prepared by incorporating ...