Now showing items 1-6 of 6
Mechanism of current transport for a photoelectrochemical cells of ITO/Cu2O/PVC-LiClO4/graphite
(Trans Tech Publications, 2013)
This paper deals with the current transport mechanism of solid state photoelectrochemical cells of ITO/Cu2O/PVC-LiClO4/graphite as well as the physical properties of a component of a device affecting its performance. The ...
Characterization of cuprous oxide thin films on n-Si substrate prepared by sol-gel spin coating
(MASS Malaysia, 2008)
Cuprous oxide films were successfully grown onto a n-Si substrate with (100) orientation via sol-gel spin-coating method at room temperature in air followed by annealing in 5% H2 + 95% N2 atmosphere. The annealed temperatures ...
The effect of spin coating rate on morphology and optical properties of cuprous oxide thin film prepared by sol-gel technique
(Australian Ceramic Society, 2010)
Cuprous oxide thin films were successfully grown on indium tin oxide (ITO) coated glass by sol-gel spin coating using diethanolamine (DEA) as a solubility agent. The films were annealed at 350 °C in 5% H2 + 95% N 2 atmosphere. ...
Physical properties of cuprous oxide thin films grown on n-Si substrate by sol-gel spin coating
(Penerbit Universiti Kebangsaan Malaysia (UKM), 2009)
Cu2O films were grown on n-Si substrates via the sol-gel spin-coating method. The films were annealed under 5% H2 + 95% N2 atmosphere at 350°C, 450°C and 550°C. Diffractogram obtained by the grazing angle x-ray diffractometry ...
Characterization of Cu2O thin films with addition of additive prepared by sol-gel spin coating process
(Universiti Putra Malaysia, 2010)
Cuprous Oxide (Cu2O) thin films were formed onto indium tin oxide (ITO) coated glass substrate by sol-gel spin coating technique using different additives namely polyethylene glycol and ethylene glycol. It was found that ...
Cuprous oxide thin films for a photoelectrochemical cell of ITO/Cu 2O/PVC-LiClO 4/graphite
(Trans Tech Publications Inc., 2012)
Cuprous oxide (Cu 2O) thin films were formed onto indium tin oxide (ITO) coated glass substrate by sol-gel spin coating technique using different additives namely polyethylene glycol and ethylene glycol. It was found that ...