Now showing items 1-5 of 5
Microstructures study on cuprous oxide thin films deposited on different substrates by using sol-gel technique
(Scientific.Net/Trans Tech Publications, 2012-12)
Cuprous oxide (Cu₂O) thin films were formed onto three different substrates such as indium tin oxide (ITO) coated glass, titanium oxide (TiO₂) and n-Si substrates by sol-gel spin coating technique. It was found that the ...
Characterization of cuprous oxide thin films on n-Si substrate prepared by sol-gel spin coating
(MASS Malaysia, 2008)
Cuprous oxide films were successfully grown onto a n-Si substrate with (100) orientation via sol-gel spin-coating method at room temperature in air followed by annealing in 5% H2 + 95% N2 atmosphere. The annealed temperatures ...
The effect of spin coating rate on morphology and optical properties of cuprous oxide thin film prepared by sol-gel technique
(Australian Ceramic Society, 2010)
Cuprous oxide thin films were successfully grown on indium tin oxide (ITO) coated glass by sol-gel spin coating using diethanolamine (DEA) as a solubility agent. The films were annealed at 350 °C in 5% H2 + 95% N 2 atmosphere. ...
Physical properties of cuprous oxide thin films grown on n-Si substrate by sol-gel spin coating
(Penerbit Universiti Kebangsaan Malaysia (UKM), 2009)
Cu2O films were grown on n-Si substrates via the sol-gel spin-coating method. The films were annealed under 5% H2 + 95% N2 atmosphere at 350°C, 450°C and 550°C. Diffractogram obtained by the grazing angle x-ray diffractometry ...
Effect of annealing atmosphere on the morphology of copper oxide thin films deposited on TiO₂ substrates prepared by sol-gel process
(Trans Tech Publications, 2014)
Copper oxide films were prepared via sol-gel like spin coating starting from methanolic solutions of cupric chloride onto the TiO₂ substrates. Films were obtained by spin coating under room conditions (temperature, 25-30 ...