Browsing Shamsul Baharin Jamaludin, Prof. Dr. by Author "Shamsul Baharin,  Jamaludin, Prof. Dr."

Now showing items 1-11 of 11

    • A brief review of layered rock salt cathode materials for lithium ion batteries 

      Tan, Tze Qing; Soo, Soon Peng; Azmi, Rahmat, Prof.; Shamsul Baharin,  Jamaludin, Prof. Dr.; Rozana Aina, Maulat Osman, Dr. ; Zul Azhar, Zahid Jamal, Dato Prof. Dr.; Mohd Sobri, Idris, Dr. (Trans Tech Publications, 2013)
      Nowadays, many researchers have been studying on the layered rock salt-type structure as cathode materials for the lithium ion batteries. LiCoO2 is the most commonly used cathode material but Co is costly and toxic. Thus, ...

    • Characterization of porous aluminum fabricated via sintering- dissolution process (SDP) 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Nik Mohd Fikry, Mohd Rushdi; Alida, Abdullah; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      Porous metals that have open pores structure with low density and light weight properties are suitable to be used in many engineering applications. In this work, the porous aluminum was fabricated via sintering dissolution ...

    • Effect of spot welding current and cycles on the mechanical properties of welded galvanized steel sheets 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Muhammad Rifki, Ismail; Khairel Rafezi, Ahmad, Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Trans Tech Publications, 2013)
      Studies on the effects of welding current and cycles were carried on the galvanized steel sheets using spot welding. The welding currents used were 3 kA, 5 kA 6 kA and the welding cycles were 4, 6 and 8. Tensile shear and ...

    • The effects of fly ash and polystyrene bead additions on compressive strength of foamed cement composites 

      Mazlee, Mohd Noor, Dr.; Key, Tan Pei; Shamsul Baharin,  Jamaludin, Prof. Dr.; Roshasmawi, Abdul Wahab; Nur Izzati, Muhd Nadzri; Alida, Abdullah (Trans Tech Publications, 2013)
      The effects of both additions of fly ash and polystyrene (PS) beads were studied on compressive strength of foamed cement composites. The increasing amount of fly ash addition up to 6 wt. % has been found to increase the ...

    • Fabrication and characterization of porous F-75 for potential application in tissue engineering 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Tan, Wei Leng; Nur Hidayah, Ahmad Zaidi; Zuraidawani, Che Daud; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2013)
      Porous F-75 (Co-Cr-Mo) was produced by powder metallurgy technique. F-75 powder was mixed with space holder and compacted using different pressures (300 MPa, 350 MPa, 400 MPa, 450 MPa). The green samples were sintered at ...

    • Mechanical properties of dissimilar welds between stainless steel and mild steel 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr.; Shahzan Kamarul, A. Kadir; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2013)
      Joining of stainless steel type 304 to mild steel was carried out using a gas tungsten arc welding (GTAW). Samples were welded using stainless steel welding electrode: (AWS: E308l-16) and mild steel welding electrode: (AWS: ...

    • Microstructure and interface analysis of glass particulate reinforced aluminum matrix composite 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Hadipramana, Josef; Mohd Fitri, Mohamad Wahid; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Azmi, Rahmat, Prof. (Trans Tech Publications (TTP), 2013)
      A characterization of microstructure and interface was made on the composites Al- 4% Cu reinforced with 15 wt. % glass particulate. The composite was fabricated by powder metallurgy followed by solution treatment and ...

    • Response of functionality graded hydroxyapatite/F-75 in saline solution 0.9% NaCl 

      Noorazimah, Mohd Ab Llah; Shamsul Baharin,  Jamaludin, Prof. Dr.; Nur Hidayah, Ahmad Zaidi (Trans Tech Publications, 2013)
      Functionally graded hydroxyapatite (HAP) /F-75 was fabricated using powder metallurgy technique. Samples fabricated were tested inside 0.9% NaCl to check their bioactivity reaction. After immersed, samples were analyzed ...

    • Sand replacement materials (SRM) in sustainable cement composites; A concise review 

      Madzura, Mohamad; Mazlee, Mohd Noor, Dr.; Shamsul Baharin,  Jamaludin, Prof. Dr. (Trans Tech Publications, 2013)
      This paper presents a short review of research works on the development of sustainable cementitious matrix composites with addition of potential mineral wastes as sand replacement materials. The study emphasizes on the ...

    • Sustainable porous materials for gas adsorption applications; A concise review 

      Wai, Hoong Chan; Mazlee, Mohd Noor, Dr.; Zainal Arifin, Ahmad, Prof.; Shamsul Baharin,  Jamaludin, Prof. Dr.; Mohd Azlan, Mohd Ishak, Prof. Madya Dr; Muhammad Shahar, Jusoh, Dr. (Trans Tech Publications, 2013)
      Many new sustainable porous materials were developed for gas adsorption applications. Common materials such as activated carbon, clay materials and metal organic framework (MOF) that utilized as potential porous adsorption ...

    • Synthesis and characterization of pure magnesium/bio-glass composite 

      Mohd Amin Farhan, Zaludin; Shamsul Baharin,  Jamaludin, Prof. Dr.; Nur Maizatul Shima, Adzali, Dr; Norhamidi, Muhammad, Prof. Dr (Trans Tech Publications, 2013)
      In this study, bio-glass 45S5 powder was added to pure magnesium powder to produce the magnesium/bio-glass composite by powder metallurgy method. The composite was synthesized based on 5 wt. %, 10 wt. % and 15 wt. % of ...