Browsing Shamsul Baharin Jamaludin, Prof. Dr. by Author "Mazlee, Mohd Noor"
Now showing items 1-10 of 10
-
Compressive strength and crack propagation of cement composites reinforced coconut fibre
Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Medwell Journals, 2012)This study presents the compressive strength and crack propagation of cement composites reinforced coconut fibre. The development of cement composites in this research were done by substituting coconut fibre to the portion ... -
Development of a Lid Sealed furnace for the production of Magnesium alloys
Shaiful Rizam, Shamsudin; Azmi, Kamardin; Mohd Nazree, Derman; Shamsul Baharin, Jamaludin; Azremi, Abdullah Al Hadi; A.M.H. Firdaus; Mazlee, Mohd Noor; C.I. Mahdi; Abdul Razak, Daud; Roslinda, Shamsudin (Universiti Kebangsaan Malaysia (UKM), 2008-12-03)An atmosphere-controlled furnace was designed for the casting process of highly reactive Mg metal and its alloys. Instead of open crucible furnace, the melting process was done under controlled atmosphere which contained ... -
Development of coconut fiber with the addition of fly ash for cement panel application in construction
Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor (Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)Natural fibers exist in large quantities and have been classified as waste materials. Coconut fiber is one of them and it is used as addition in fabrication of cement panel. Industrial waste materials such fly ash is ... -
The effects of solutionizing temperatures on microstructures of as-received A357 alloy
Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin; Shaiful Rizam, Shamsuddin; Mohabattul Zaman, SNS Bukhari; Khairel Rafezi, Ahmad; Raudhah, Othman (Universiti malaysia Perlis, 2009-12-01)Solution treatment has been carried out on as-received A357 alloy at two solution treatment temperatures of 530ºC and 550ºC for 11 hours. The microstructural study was performed by using optical microscope. Optical ... -
The effects of superheating treatment on distribution of eutectic silicon particles in A357-continuous stainless steel composite
Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin, Prof. Dr. (Trans Tech Publications, 2013)In the present study, superheating treatment has been applied on A357 reinforced with 0.5 wt.% (Composite 1) and 1.0 wt.% (Composite 2) continuous stainless steel composite. In Composite 1, the microstructure displayed ... -
The effects of welding current and welding duration on the shear strength of spot welded austenitic stainless steel
Shamsul Baharin, Jamaludin; Ooi, Woei Ming; Mazlee, Mohd Noor; Khairel Rafizi, Ahmad (Universiti Malaysia Perlis, 2009-12-01)Introduction: Resistance spot welding is commonly employed in the fabrication of sheet metal assembly. It can be applied to join metals such as low carbon steel, nickel, aluminum, titanium, copper alloy, stainless steel ... -
Interfacial reaction layer and tensile shear strength of AI 6063 alloy/stainless steel 316L spot welded joint
Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin, Prof. Dr.; Ayusnida, S. (SIRIM, 2010-11-22) -
Mechanical properties and fracture behaviour of coconut fibre-based green composites
Alida, Abdullah; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr. (Foundation for Materials Science and Engineering “Serban Solacolu”, 2012)This paper presents the influence of natural fibre content on the mechanical properties of coconut fibre based-green composites. The mixture ratio of cement:sand by weight was fixed at 1:1. Coconut fibre was used as ... -
Microstructural study and differential scanning alorimetry analysis at elevated temperatures of uperheated as-cast A357 alloy
Mazlee, Mohd Noor; Shamsul, Baharin Jamaludin, Prof. Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shaiful Rizam, Shamsudin (University of Malaya, 2009)The microstructure of superheated as-cast A357 alloy has been analysed to study the solidification structures of α-Al dendrites, eutectic Si particles and intermetallic compounds at different sections of the specimen. The ... -
Microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires composite via casting technique
Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin; Kamarudin, Hussin (Science Publications, 2008)The microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires (Al-Si-Mg/SSw) has been investigated and focused on the both microstructures in the matrix and near to the interface and also the wetting ...