Browsing Shamsul Baharin Jamaludin, Prof. Dr. by Title

Now showing items 59-78 of 88

    • Metal Implant 

      Shamsul Baharin, Jamaludin, Prof. Dr; Mazlee, Mohd Noor, Dr.; Che Mohd. Ruzaidi, Ghazali, Prof. Madya; Nurhidayah, Ahmad Zaidi (Malaysian Invention and Design Society (MINDS), 2006-05-19)
      This research product is cobalt-chromium metal implant produced by powder metallurgy technique.

    • The Microsructure and Properties of Aluminium Composite Reinforced with 65 μm Alumina Particles via Powder Metallurgy 

      Khairel Rafezi Ahmad; Wong Jing Lee; Ruhiyuddin Mohd Zaki; Mazlee Mohd Noor; Mohd Fitri Mohamad Wahid; Shaiful Rizam Shamsudin; Shamsul Baharin Jamaludin, Assoc. Prof. Dr. (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      This article will report the effect of weight percentage on the microstructure and properties of alumina particle reinforced aluminum metal matrix composite. This involved fabrication of aluminum composite via powder ...

    • Microstructural study and differential scanning alorimetry analysis at elevated temperatures of uperheated as-cast A357 alloy 

      Mazlee, Mohd Noor; Shamsul, Baharin Jamaludin, Prof. Dr.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shaiful Rizam, Shamsudin (University of Malaya, 2009)
      The microstructure of superheated as-cast A357 alloy has been analysed to study the solidification structures of α-Al dendrites, eutectic Si particles and intermetallic compounds at different sections of the specimen. The ...

    • Microstructural study and differential scanning Calorimetry analysis at elevated tempatures of superhead As-Cast A357 alloy 

      Mazlee Mohd Noor; Shamsul Baharin Jamaludin; Kamarudin Hussin; Shaiful Rizam Shamsudin; K. Ismail; M.F. Abdullah (Universiti Kebangsaan Malaysia (UKM), 2008-12-03)
      The microstructure of superheated as-cast A357 alloy has been analysed to study the solidification structures of α-Al dendrites, eutectic Si particles and intermetallic compounds at different sections of the specimen. ...

    • Microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires composite via casting technique 

      Mazlee, Mohd Noor; Shamsul Baharin, Jamaludin; Kamarudin, Hussin (Science Publications, 2008)
      The microstructural study of Al-Si-Mg alloy reinforced with stainless steel wires (Al-Si-Mg/SSw) has been investigated and focused on the both microstructures in the matrix and near to the interface and also the wetting ...

    • Microstructure and in-vitro test bioactivity behavior of Co-Cr-Mo (F-75)/hydroxyapatite in phosphate buffered saline solution 

      Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Maizatul Shima, Adzali; Mohd Nazree, Derman, Dr. (Technical University of Košice, 2014)
      Cobalt based alloys were the first metallic materials successfully used in orthopedic applications. However, these alloys are bioinert, it is necessary to make them bioactive in the human body to improve their application ...

    • Microstructure and interface analysis of glass particulate reinforced aluminum matrix composite 

      Shamsul Baharin,  Jamaludin, Prof. Dr.; Hadipramana, Josef; Mohd Fitri, Mohamad Wahid; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Azmi, Rahmat, Prof. (Trans Tech Publications (TTP), 2013)
      A characterization of microstructure and interface was made on the composites Al- 4% Cu reinforced with 15 wt. % glass particulate. The composite was fabricated by powder metallurgy followed by solution treatment and ...

    • Microstructure and microhardness properties of Fe-Cr-Al2O3 composites 

      Saidatulakmar, Shamsuddin; Shamsul Baharin, Jamaludin, Prof. Dr.; Zuhailawati, H.; Zainal Arifin, A. (Universiti Putra Malaysia (UPM), 2010)
      The requirement for high performance materials of high wear and corrosion resistance lead to an increasing interest in ferrous matrix composites. Metal matrix composite of iron-chromium reinforced with alumina was fabricated ...

    • Microstructure, Properties and Fracture Mechanism of Al 2014 Reinforced with Alumina Particles 

      Mazlee Mohd Noor; Shamsul Baharin Jamaludin (Kolej Universiti Kejuruteraan Utara Malaysia, 2004)
      The studies of microstructure, properties and fracture mechanism have been conducted on Al 2014 matrix alloy reinforced with 10 volume percent (Composite 1) and 15 volume percent (Composite 2) of alumina (Al2O3) particles ...

    • Microwave sintering of pure iron with addition of stearic acid as binder 

      Wan Abdul Rahman Assyahid, Wan Ibrahim; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2012)
      The purpose of this study is to investigate the effect of the stearic acid as binder in sintering pure iron using a microwave furnace. The study was focused in mechanical properties such as porosity, density and micro-hardness ...

    • The need to intensify research efforts in the alternative to lead shot 

      Baba Gowon; Kahtan S., Mohammed, Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Alida, Abdullah (Trans Tech Publications, 2014)
      The problem of lead poisoning resulting from the use of lead shot in hunting waterbirds and shooting sports has led to the partial ban, voluntary restriction and complete ban of lead shot in some countries. The ban resulted ...

    • Optimization of sintering temperature on microwave sintering of the composite iron-chromium reinforced with alumina particles 

      Wan Abdul Rahman Assyahid, Wan Ibrahim; Shamsul Baharin, Jamaludin, Prof. Dr.; Mazlee, Mohd Noor, Dr. (Trans Tech Publications, 2014-01)
      Microwave sintering technology has become attractive and gained interest among material researchers due its capability and advantages over conventional sintering. Since two decades ago, intensive researches on microwave ...

    • Oxide semiconductors for solar to chemical energy conversion: nanotechnology approach 

      Shamsul, Baharin Jamaludin, Prof. Dr.; Mohd Awang, Idris, Dr.; Zul Azhar, Zahid Jamal, Dato' ,Prof. Dr.; Nafarizal, Nayan, Dr.; Abdul Kadir, Othman, Dr.; Mohd Zainizan, Sahdan, Dr.; Mohamad Pauzi, Zakaria; M, Ionescu; Janusz, Nowotny, Prof. (Institute for Ionics, 2014)
      The present work considers the application of oxide semiconductors in the conversion of solar energy into the chemical energy required for water purification (removal of microbial cells and toxic organic compounds from ...

    • Physical properties of FG HAP-F75 fabricated by powder metallurgy 

      Noorazimah, Mohd Ab Llah; Shamsul Baharin, Jamaludin, Prof. Dr.; Nur Hidayah, Ahmad Zaidi (Universiti Malaysia Perlis (UniMAP)Centre for Graduate Studies, 2010-10-16)
      Functional graded (FG) HAP-F75 was prepared by powder metallurgy technique. Three layers of functional graded HAP-F75 was fabricated using single punch hydraulic press. The fabrication technique consists of mixing, pressing ...

    • Potential of palm oil clinker as reinforcement in aluminium matrix composites for tribological applications 

      Y. B., Zamri; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohammed Misbahul, Amin, Prof. Madya Dr. (University of Malaya, 2011)
      This research studied the potential of palm oil clinker as reinforcement in composite based aluminium for tribological applications. Palm oil clinker particle (POCp) reinforced aluminium matrix composites at different ...

    • Preliminary Microstructure and Hardness Studies of A356/Stainless Steel Composite via Gravity Die Casting Technique 

      Mazlee Mohd Noor; Shamsul Baharin Jamaludin, Assoc. Prof. Dr.; Kamarudin Hussin, Kol. Prof. Dato’ Dr.; Shaiful Rizam Shamsudin; K. Ismail (Universiti Malaysia Perlis (UniMAP), 2007-06-09)
      The microstructure and hardness of A356/stainless steel composite via gravity die casting technique were evaluated. Both nearly completed bonding and incomplete bonding was seen at the stainless steel wire- A356 matrix ...

    • Preliminary study of hap addition to Co-Cr-Mo alloy fabricated by powder metallurgy method 

      Nur Maizatul Shima, Adzali; Shamsul Baharin, Jamaludin; Mohd Nazree, Derman; Nur Hidayah, Ahmad Zaidi (SIRIM, 2010-11-22)
      This preliminary study of HAP addition in Co-Cr-Mo (F-75) was carried out by powder metallurgy method. The lab work comprises the mixing of Co-Cr-Mo with different HAP (hydroxyapatite) composition which varied from 0 wt. ...

    • Preparation and characterization of Co-HA powder using modified electroless method 

      Mohd Zaheruddin, Kasmuin; Sri Asliza, Md Amin; Azmi, Rahmat, Prof. Madya Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Khairel Rafezi, Ahmad, Dr. (Trans Tech Publications, 2014)
      C0-HA composite produced by simple electroless deposition method was studied. From the particle size analysis by Malvern particles analyzer its shows that 19% increment in average of the particle size powder increase after ...

    • Recycled Aluminium Composite Pulley 

      Mazlee, Mohd. Noor; Shamsul Baharin, Jamaludin, Prof. Dr.; Murizam, Darus (Malaysian Invention & Design Society (MINDS), 2006-05-19)
      Recycle Aluminium Composite Pulley was an environmental-friendly pulley from innovative recycle aluminium composite materials. This pulley was fabricated by using recycled aluminium alloy from automotive component reinforced ...

    • Response of functionality graded hydroxyapatite/F-75 in saline solution 0.9% NaCl 

      Noorazimah, Mohd Ab Llah; Shamsul Baharin,  Jamaludin, Prof. Dr.; Nur Hidayah, Ahmad Zaidi (Trans Tech Publications, 2013)
      Functionally graded hydroxyapatite (HAP) /F-75 was fabricated using powder metallurgy technique. Samples fabricated were tested inside 0.9% NaCl to check their bioactivity reaction. After immersed, samples were analyzed ...