Browsing Mohd Afendi Bin Rojan, Associated Professor Dr. by Issue Date

Now showing items 1-20 of 36

    • Fracture toughness test of epoxy adhesive dissimilar joint with various adhesive thicknesses 

      Mohd Afendi, Rojan, Dr.; Tokuo, Teramoto (The Japan Society of Mechanical Engineers, 2010-11)
      In this study, effect of bond thickness upon the strength and fracture toughness of epoxy adhesive dissimilar joint is investigated. Tensile and three-point-bending (abbreviated as 3PB hereafter) fracture tests are conducted. ...

    • Strength and fracture characteristics of SUS304/AL-Alloy scarf adhesive joint with various adhesive thicknesses 

      Mohd Afendi, Rojan, Dr.; Tokuo, Teramoto; Akihiro, Matsuda (Trans Tech Publications, 2011-01)
      In this study, strength and fracture toughness of epoxy adhesively bonded scarf joints of dissimilar adherends, namely SUS304 stainless steel and YH75 aluminium alloy are examined on several scarf angles and various bond ...

    • Strength prediction of epoxy adhesively bonded scarf joints of dissimilar adherends 

      Mohd Afendi; Teramoto, Tokuo; Hairul, Bakri (Elsevier Ltd, 2011-09)
      In this study, strength of epoxy adhesively bonded scarf joints of dissimilar adherends, namely SUS304 stainless steel and YH75 aluminum alloy is examined on several scarf angles and various bond thicknesses under uniaxial ...

    • Bending fatigue strength of case-carburized spur gears with boss 

      Imaduddin Helmi, Wan Nordin; Mohd Afendi, Rojan; Salmie Suhana, Che Abdullah; Mohd Hafis, Sulaiman (Universiti Malaysia Perlis (UniMAP)Pusat Pengajian Kejuruteraan Mekatronik, 2012-02-27)
      Studies on the spur gear, to increase the bending fatigue strength have been published by adopting gear with high pressure angle and positive addendum modification factor. However, studies on the spur gear with wide ...

    • Load-displacement behavior of RBD palm stearin oil lubricant quantity in cold extrusion 

      Mohd Hafis, Sulaiman; Mohd Ridzuan, Mohd Jamir; Mohd Afendi, Rojan; Imaduddin Helmi, Wan Nordin; Boon, Raymond Whee Heng; Syahrullail, Samion, Dr. (Universiti Malaysia Perlis (UniMAP)Pusat Pengajian Kejuruteraan Mekatronik, 2012-02-27)
      Large consumption of lubricant may affect the environment due to their high potential of pollution. Therefore, there is significant demand to provide a solution to this current condition by using alternative lubricant ...

    • Strength and fracture characteristics of shear adhesive dissimilar joint 

      Mohd Afendi; Imaduddin Helmi, Wan Nordin; Ruslizam, Daud; Teramoto, Tokuo (Universiti Malaysia Perlis (UniMAP)Pusat Pengajian Kejuruteraan Mekatronik, 2012-02-27)
      In this study, the effect of bond thickness upon the shear strength of epoxy adhesively bonded joint with dissimilar adherends is addressed. The bond thickness, t between the adherends is controlled to be ranged from ...

    • Study on strength of V-shaped epoxy adhesive joint 

      Mohd Afendi; Mohd Hafis, Sulaiman; Ishak, Ibrahim; Nakajima, Toru; Maeda, Masashi; Teramoto, Tokuo (Universiti Malaysia Perlis (UniMAP)Pusat Pengajian Kejuruteraan Mekatronik, 2012-02-27)
      This paper deals with strength and failure prediction of V-shaped epoxy adhesive joint. The effect of scarf angle and bond thickness upon the joint strength is investigated by tensile test. A simple failure criterion ...

    • Elastic crack interaction limit of two interacting edge cracks in finite body 

      R., Daud; M. A., Rojan; A. K., Ariffin; S., Abdullah (Universiti Malaysia Perlis (UniMAP)Pusat Pengajian Kejuruteraan Mekatronik, 2012-02-27)
      In certain range of crack interval ratio and crack width ratio, the neighboring cracks will affect the changes of stress field interaction around the crack tip, thus induced significant changes in stress intensity factor. ...

    • Mathematical model of elastic crack interaction and two-dimensional finite element analysis based on Griffith energy release rate 

      Ruslizam, Daud, Dr.; Ahmad Kamal Ariffin, Mohd. Ihsan, Prof. Dr.; Shahrum, Abdullah, Prof. Dr.; Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr. (Trans Tech Publications, 2013)
      Stress shielding interaction effect of two parallel edge cracks in finite body under uniaxial loading is analysed using developed finite element (FE) analysis program. In present study, the stress shielding interaction is ...

    • Experimental investigation of PCM spheres in thermal energy storage system 

      Nasrul Amri, Mohd Amin, Dr.; Azizul, Mohamad; Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr.; Bruno, Frank, Dr.; Belusko, Martin (Trans Tech Publications, 2013)
      This paper presents the experimental result of a small scale packed bed of random spheres with encapsulated PCM being charged and discharged. A vapor compression refrigerator and heated room with fan heater were used to ...

    • Stress analysis and failure characterizations of V-shaped epoxy adhesively bonded joint 

      Mohd Afendi, Rojan, Dr.; Mohd Shukry, Abdul Majid, Dr.; Ruslizam, Daud, Dr.; Ishino, Y.; Teramoto, Tokuo (Trans Tech Publications, 2013)
      This paper deals with stress and failure characteristics of V-shaped epoxy adhesive joint. Effect of scarf angle upon failure morphology was investigated by tensile test and monitoring using high speed camera. V-shaped ...

    • Effects of winding angles in biaxial ultimate elastic wall stress (UEWS) tests of glass gibre reinforced epoxy (GRE) composite pipes 

      Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr.; Ruslizam, Daud, Dr.; Gibson, A. G.; M., Hekman (Trans Tech Publications, 2013)
      This paper presents an experimental investigation into the influence of winding angles in multiaxial ultimate elastic wall stress (UEWS) tests of glass-fibre reinforced epoxy (GRE) composite pipes. Currently, UEWS test is ...

    • Strength prediction and reliability of brittle epoxy adhesively bonded dissimilar joint 

      Mohd Afendi, Rojan, Dr.; Mohd Shukry, Abdul Majid, Dr.; Ruslizam, Daud, Dr.; Abdul Ghaffar, Abdul Rahman, Dr.; Teramoto, Tokuo (Elsevier Ltd, 2013)
      This paper deals with strength and failure prediction as well as reliability issues of adhesive joints of brittle epoxy bonding of two dissimilar adherends. Effects of bond thickness and scarf angle upon the strength of ...

    • Modelling of multi-axial ultimate elastic wall stress (UEWS) test for glass fibre reinforced epoxy (GRE) composite pipes 

      Mohd Shukry, Abdul Majid, Dr.; Mohd Afendi, Rojan, Dr.; Ruslizam, Daud, Dr.; Nasrul Amri, Mohd Amin, Dr.; Azizul, Mohamad; Cheng, Ee Meng, Dr.; Gibson, A. G. (Trans Tech Publications, 2013)
      This paper describes the modeling of multiaxial ultimate elastic wall stress (UEWS) at room temperature for glass fibre reinforced epoxy (GRE) composite pipes. The model developed, predicts the stress-strain response caused ...

    • Effect of adhesive thickness on adhesively bonded T-joint 

      A. R., Abdullah; Mohd Afendi, Rojan, Dr.; Mohd Shukry, Abdul Majid, Dr. (IOP Publishing Ltd, 2013)
      The aim of this work is to analyze the effect of adhesive thickness on tensile strength of adhesively bonded stainless steel T-joint. Specimens were made from SUS 304 Stainless Steel plate and SUS 304 Stainless Steel ...

    • Effects of winding angles in biaxial ultimate elastic wall stress (UEWS) tests of glass fibre reinforced epoxy (GRE) composite pipes 

      Mohd Shukry, Abdul Majid; Mohd Afendi, Rojan, Dr.; Ruslizam, Daud; Gibson, A. G.; M., Hekman (Universiti Malaysia Perlis (UniMAP), 2013-03-26)
      This paper presents an experimental investigation into the influence of winding angles in multiaxial ultimate elastic wall stress (UEWS) tests of glass-fibre reinforced epoxy (GRE) composite pipes. Currently, UEWS test is ...

    • Mathematical model of elastic crack interaction and two-dimensional finite element analysis based on griffith energy release rate 

      Ruslizam, Daud; Ahmad Kamal, Ariffin; Shahrum, Abdullah; Mohd Shukry, Abdul Majid; Mohd Afendi, Rojan, Dr. (Universiti Malaysia Perlis (UniMAP), 2013-03-26)
      Stress shielding interaction effect of two parallel edge cracks in finite body under uniaxial loading is analysed using developed finite element (FE) analysis program. In present study, the stress shielding interaction ...

    • Stress analysis and failure characterizations of v-shaped epoxy adhesively bonded joint 

      Mohd Afendi, Rojan, Dr.; Mohd Shukry, Abdul Majid; Ruslizam, Daud; Ishino, Y.; Teramoto, Tokuo (Universiti Malaysia Perlis (UniMAP), 2013-03-26)
      This paper deals with stress and failure characteristics of V-shaped epoxy adhesive joint. Effect of scarf angle upon failure morphology was investigated by tensile test and monitoring using high speed camera. V-shaped ...

    • Dielectric spectroscopy of pharmaceutical drug (Paracetamol) dosage in water 

      Cheng, Ee Meng, Dr.; Mohd Fareq, Abd. Malek, Dr.; Farrah Salwani, Abdullah; Wee, Fwen Hoon; Khor, Shing Fan; Lee, Yeng Seng; Mohd Afendi, Rojan, Dr.; Mohd Shukry, Abdul Majid, Dr.; Shahriman, Abu Bakar, Dr.; Wan Khairunizam, Wan Ahmad, Dr.; Liyana, Z. Y. (IEEE Conference Publications, 2013-12)
      This paper discuss about the dielectric measurement on different concentration of pharmaceutical drug using Agilent 85070E High-Temperature and Slim form probe. A microwave dielectric measurement is set up to measure dosage ...

    • General lifetime damage model for glass fibre reinforced epoxy (GRE) composite pipes under multiaxial loading 

      Azizul, Mohamad; Mohd Afendi, Rojan, Dr.; M, Hekman; Gibson, A.G; Mohd Shukry, Abdul Majid, Dr.; Nasrul Amri, Mohd Amin, Dr.; Ruslizam, Daud, Dr.; Meng, Cheng Ee, Dr. (Trans Tech Publications, 2014)
      This paper presents the modelling of a general lifetime performance for glass fibre reinforced epoxy (GRE) composite pipes similar to the well-known Tsai-Hill interactive failure criterion. Tsai Hill criterion is based ...