Palm composite is high silica based material composed of palm ash and unsaturated polyester. Products produced has variety of useful applications. Tiles fabricated from palm ash exhibits high strength compared to commercial ...

The Bimodal Rehabilitation for the Voice and Movement Impaired using Brain Signals is a device which can help the paralyzed patients to communicate through a digital voice and also to drive a robot chair within their homes ...

This project is an attempt to use chemically modified egg shell for oil absorbent materials. Normally egg shell is most often thrown away or discarded. Here, instead of throwing away, the egg shell is first pulverized to ...

Low Pollution Liquid Fuel Burner is designed for heating of domestic system and for hot air generators. Low Pollution Liquid Fuel Burner is reliable and designed for high efficiency, low emissions and features the following ...

This reseach present the design of 2.4GHz active RFID item tracking system for healthcares and hospitals. The system is designed to solves the problems: I. Staffs spending too much time looking for equipment throughout the ...

This research demonstrating that nanogap biosensor was fabricated by standard CMOS technologies function as extremely sensitive and selective biosensor for biomolecular detection and medical diagnostic application using ...

Electrolyte-Insulator-Semiconductor (EIS) capacitor is used to evaluate pH sensitivity of tin oxide thin films. Silicon dioxide (SiO2) was first used as pH-sensitive dielectric for ISFET. Currently, there have several types ...

A Spagnum moss has been identified as an excellent adsorption of oil and has been used by many big oil conglomerates worldwide. The moss has an adsorption capacity of more that 90% of its dry weight. The design structure ...

The pressure sensor is a monolithic absolute pressure transducer. The transducer utilizes as sensing element, which varies its output voltage when pressure is applied to surface micro-machined silicon diaphragm.

In this study, the particle board (kayan 1) was made from rice husk. The rice husk was blended with Urea-Formaldehyde (UF) as a binder and Ammonium Chloride (NH4C1) as a hardener before compaction using hot press.