Browsing International Journal of Nanoelectronics and Materials (IJNeaM) by Title
Now showing items 54-73 of 527
-
Charge recombination in zinc oxide-based dye-sensitized solar cell: a mini review
(Universiti Malaysia Perlis (UniMAP), 2021-12)Dye-sensitized solar cell (DSSC) has been studied widely due to its efficiency and the simplicity of manufacturing technology. Much research has been performed to improve the photovoltaic output parameters in DSSC by ... -
Comparative electromagnetic properties of polypropylene composites loaded with cobalt ferrites by melt mixing
(Universiti Malaysia Perlis (UniMAP), 2019-10)Polypropylene (PP) was investigated as a polymeric matrix of functional composites by melt mixing in a compression mould. The sample with 15 wt.% loading of cobalt ferrite (CoFe2O4) increases the electrical permittivity ... -
Comparative simulation of DC and AC performances of Al0.26Ga0.74N/GaN HEMT with BGaN Back Barrier
(Universiti Malaysia Perlis (UniMAP), 2021-01)This paper discusses the influence of BGaN layer on the structure of Al0.26Ga0.74N/ B0.02Ga0.98N /GaN HEMT with T- Gate. The use of BGaN back barrier on this device enhances confinement of the electron in the device. We ... -
A comparative study of electronic and thermoelectric properties of bulk, 2D sheet and 1D wire of Silicon: an ab-initio study
(Universiti Malaysia Perlis (UniMAP), 2017)We have made a comparative study of the electronic and thermoelectric properties of bulk, 2D-sheet and 1D atomic wire of Silicon, using the Full Potential Linearized Augmented Plane Wave method (FP-LAPW) within the ... -
A comparative study of quantum gates and classical logic gates implemented using Solid-State Double-Gate Nano-MOSFETs
(Universiti Malaysia Perlis, 2016)The purpose of this paper is to compare the operations of silicon-based solid-state quantum computer with classical logic gate made of double-gate (DG) nano-MOSFETs. Quantum gates, such as quantum NOT gate, controlled-NOT ... -
Comparison measurements of low resistance and high strength on synthesis graphene Conductive Ink filled epoxy
(Universiti Malaysia Perlis (UniMAP), 2021-08)Stretchable and conductive materials are expected to be widely used for various electronic equipment in the future especially in the field of automotive safety. Flexibility and expandability are the main features of the ... -
Comparsion of the physical properties for Cds and Cds doved PVA thin prepared by spray pyrolysis
(Universiti Malaysia Perlis, 2013)Cadmium sulphide (CdS) and CdS doped with PVA semiconductor thin films were prepared by chemical pyrolysis technique. The thickness of the films was varied in the range (1.281, 1.367, 1.421, 1.485) μm and (1.722, 1.776, ... -
Composite of Hibiscus Tiliaceus Stem Fiber/Polyester modified with carbon powder: synthesis and characterization of tensile strength, flexural strength and morphology properties
(Universiti Malaysia Perlis (UniMAP), 2021-07)A successful synthesis of composite particles of hibiscus tiliaceus bark fiber (HBF) and carbon powder from coconut shell (CP) by hot press technique has been reported. The microstructure of samples is investigated using ... -
Comprehensive simulation of adjustable welding jig through ASIE model in refrigeration and air conditioning workshop
(Universiti Malaysia Perlis (UniMAP), 2022-03)Welding job involves a number of different tools and it is very common to use welding jigs on a project due to their strength and dependability. However, most of the welders used only brick, cast iron or G clamp for ... -
Compressibility behaviour of Batu Pahat Soft Clay Treated by combination between Tx-85 with Sh-85 probase stabilizer
(Universiti Malaysia Perlis (UniMAP), 2021-08)Construction on the soft ground area is a great challenge in the field of geotechnical engineering. It gives instability and settlement problems when construction takes place. The characteristics of soft soil are high ... -
Computed torque and velocity feedback control of cooperative manipulators handling a flexible beam
(Universiti Malaysia Perlis (UniMAP), 2020-05)Handling a flexible object is more complicated than a rigid one since it involves the vibration of the object. Since vibration is known to lead to disturbance, discomfort, damage, and destruction; it needs to be suppressed. ... -
Concerns about deteriorated nano-fiber reinforced composite as candidate for renewable energy applications
(Universiti Malaysia Perlis, 2016)Nanocomposite has become nowadays best candidate to be used for renewable energy applications due to its superior properties which open the doors for more prospects in term of the engineering challenges as well as economic ... -
Contact technology and energy resolution of CdTe junction detectors
(Universiti Malaysia Perlis, 2011)Cadmium telluride (CdTe) has been regarded as promising semiconducting materials for hard X-ray and γ-ray detection. Inexpensive, fast and good resolution CdTe junction detector technique has been developed. A state- of ... -
Contemplating Nanometer Scale Transport Characteristics through Aromatic Molecules Based Molecular Devices
(Universiti Malaysia Perlis (UniMAP), 2018-07)In this research article, we contemplate the quantum transport properties through a single molecular junction comprising of Azulene (C10H8) sandwiched between two semi-infinite gold (Au) electrodes and compare the transport ... -
The control of structural and magnetic properties in Bismuth substituted cobalt ferrite by heat treatment
(Universiti Malaysia Perlis (UniMAP), 2021-10)The bismuth substituted cobalt ferrite CoBiₓFe₂-ₓO₄ (x = 0.1) were synthesized by co-precipitation procedure. The properties of the samples were controlled by heat treatment through annealing processes at temperatures of ... -
Copolysiloxane solvent detector using langmuir-blodgett surface potential method
(Universiti Malaysia Perlis (UniMAP), 2017)A quick detection for volatile organic compounds (VOCs), especially in the indoor environment is a must as the build-up level of VOCs is multiple times greater than outdoor environment. By using a surface potential probe, ... -
Correlation between crystal structure and thermal reaction of TiO2 - Graphene Oxide
(Universiti Malaysia Perlis (UniMAP), 2021-04)TiO2 - Graphene oxide (GO) (GO = 0-1.0wt %) powders were synthesised using sol-gel method and annealed at 500°C. The samples were then characterised using X-ray diffraction (XRD). The additional of GO gave significant ... -
Correlation between surface texturing on pre-plated leadframe and delamination phenomenon in automotive packaging
(Universiti Malaysia Perlis (UniMAP), 2022-07)Poor adhesion between mold compound and leadframe in integrated circuit packaging for automotive devices can cause serious reliability issue and degrade the package quality. This study aims to evaluate and understand the ... -
Correlation between the calcination and sintering temperature on phase formation, microstructure and dielectric properties of SrTiO3 ceramics
(Universiti Malaysia Perlis (UniMAP), 2022-10)The aim of this work is to investigate the effect of calcination temperature (600, 700 and 800°C) and sintering temperature (1000, 1050 and 1100°C) on pure phase formation, microstructure and dielectric properties of ... -
CuO NPs incorporated single and double junction polymer solar cells
(Universiti Malaysia Perlis (UniMAP), 2017)Multi-junction architecture is an attractive method to overcome the efficiency limit of single-junction photovoltaic solar cells. Series-connected multi-junction polymer solar cells (PSCs) have attracted much attention ...