Browsing International Journal of Nanoelectronics and Materials (IJNeaM) by Title

Now showing items 239-258 of 454

    • IR 4.0 generation of face recognition based system 

      Aifian; Saizal, Md Mustam; M.F.L Abdullah; Farhana, Ahmad Po’ad; Ariffuddin, Joret (Universiti Malaysia Perlis (UniMAP), 2021-12)
      Nowadays, the usage of a manual attendance system has become irrelevant with the current technological advancements. Although, there are many advanced attendance systems such as RFID attendance. It does not solve the problem ...

    • Kinetics of cadmium adsorption by CNTs grown on PACs 

      Abdullah, Al Mamun; Mohammed A., Al-Saadi; Suleyman A., A. Muyibi; Md. Zahangir, Alam; Iis, Sopyan (Universiti Malaysia Perlis, 2014)
      Isotherms and kinetics models are useful tool for the investigation of adsorption process. Carbon nanotubes (CNTs) grown on powdered activated carbons (PACs) was used as novel adsorbent. Two isotherms and three kinetic ...

    • Laser treatment effect on fatigue characterizations for steel alloy beam coated with nanoparticles 

      Oleiwi, Jawad. K.; Fahad, Nesreen Dakhel; Mohammed Abdulridha, Marwah; Njim, Emad Kadum; Al-Waily, Muhannad (Universiti Malaysia Perlis (UniMAP), 2023-01)
      Previous work investigated the effect of nano coating for steel beams on the fatigue characterization and calculated that the coating for beams leads to modifying the fatigue life and stress. Therefore, this work modifies ...

    • Lean Six Sigma for process efficiency improvement: Case study at roof-tile manufacturing company 

      R. Abdullah; A. H. Abdul Rasib; A. Azhar; H. O. Mansoor (Universiti Malaysia Perlis (UniMAP), 2021-08)
      Lean Six Sigma is regarded as a strategic business change to improve the efficiency of the processes. A combination of Lean Manufacturing and Six Sigma's theory is a powerful practice by companies looking for ways to ...

    • Low-cost synthesis approach for reversible authenticator circuits in QCA environment 

      Bhoi, Bandan; Misra, Neeraj Kumar; Lafifa, Jamal; Pradhan, Manoranjan (Universiti Malaysia Perlis (UniMAP), 2019-04)
      Recently, Quantum-dot Cellular Automata (QCA) based reversible logic circuit has an enormous benefit over CMOS based logic circuit. As a promising technology for Nanoelectronics computing, reversible-QCA has gained more ...

    • Low-power and high-performance 1-bit set Full-adder 

      Paulthurai, Anbarasu; Dharmaraj, Balamurugan (Universiti Malaysia Perlis, 2013)
      An adder is an important element of all arithmetic and logic units. The recent trend in Nanotechnology is moving towards the need of the devices, which consume low power. The Single Electron Transistor (SET), distinguish ...

    • Luminescence studies on lithium-calcium borophosphate glasses doped with Fe²⁺, Ni²⁺ and Zn²⁺ ions 

      Sum, Wong Poh; Hua, Wan Ming; Rosli, Hussin; Zuhairi, Ibrahim (Universiti Malaysia Perlis, 2014)
      Luminescence material is a solid which converts certain types of energy into electromagnetic radiation over and above thermal radiation. Due to the limited studies on luminescence properties of the transition metal ion ...

    • Machine learning-based queueing time analysis in XGPON 

      N. A., Ismail; S. M., Idrus; F., Iqbal; A.M., Zin; F., Atan; N., Ali (Universiti Malaysia Perlis (UniMAP), 2021-12)
      Machine learning has been a popular approach in predicting future demand. In optical access network, machine learning can best predict bandwidth demand so as to reduce delays. This paper presented a machine learning approach ...

    • Magnetic properties and magnetocaloric effect of MnCoAl compound 

      Abdul Rashid, Abdul Rahman; Muhamad Faiz, Md Din; Jianli, Wang; Nur Sabrina, Suhaimi; Nurul Hayati, Idris; Norinsan Kamil, Othman; Mohammad Ismail; Mohd Taufik, Jusoh (Universiti Malaysia Perlis (UniMAP), 2021-12)
      This work investigates the substitution of main-group element Al for Ge in the MnCoGe system to study the effect of magnetic phase transition and the magnetocaloric effect of the compounds. The Room temperature X-ray ...

    • Marıne Calcıum Hydroxyapatıte as embryonıc materıal for excellent performance of perovskıte solar cell 

      I. Q., Afiqah; N. A., Nik Aziz; Siti Nurhaziqah Abd Majid; S., Hasiah; Muhamad Nur Ghoyatul Amin (Universiti Malaysia Perlis (UniMAP), 2020-05)
      Marine calcium hydroxyapatite (HAp) extracted from fish bone has been perceived to be good as it carries good bioactivity and biocompatibility. In fact, the production of HAp from synthetic process involves many chemicals ...

    • Material selection for CMOS compatible high Q and high frequency MEMS disk resonator using Ashby approach 

      G. M., Sundaram; Angira, Mahesh; Gupta, Navneet; Rangra, Kamaljit (Universiti Malaysia Perlis, 2016)
      In this paper, the most appropriate material for MEMS Disk resonator compatible with CMOS technology is selected using the Ashby approach. Materials indices are formulated based on three primary performance parameters, ...

    • Mathematical modelling of passive discrete lumped parameter system using standard malaysian rubber constant viscosity 

      Mohd Azli, Salim; Adzni, Md. Saad; Feng, Dai; Norbazlan, Mohd Yusof; Nor Azmmi, Masripan; Aminurrashid, Noordin (Universiti Malaysia Perlis (UniMAP), 2021-08)
      This paper represents the basic and circular vibration isolator in High Frequencies using Malaysian natural rubber. Rubber material is chosen because it has very high damping to ensure the sufficient dissipation of ...

    • Mechanical and thermal behavior of hybrid nano composite 

      Linson, A. Arockia; Paulthurai, Anbarasu; Darmaraj, Balamurugan (Universiti Malaysia Perlis, 2014)
      The paper focused on the study to improve the mechanical and thermal stability of the composite material by adding fibre reinforced plastic and iron oxide nano fillers. The paper also on study of Nanocomposite material ...

    • Mechanical properties and structure formation amorphous of Zr₅₉Ta₅Cu₁₈Ni₈Al₁₀ bulk metallic glass alloy 

      Bendjemil, B.; Hafs, A.; Seghairi, N.; Barrico, M. (Universiti Malaysia Perlis, 2013)
      In the present paper thermal stability and structure of Zr₅₉Ta₅Cu₁₈Ni₈Al₁₀ (numbers indicate at.%) glassy alloys were investigated. The structural studies revealed an amorphous structure for the rod with a diameter of 2 ...

    • Mechanical properties of oil palm frond wood filled thermoplastic polyurethane 

      Abdul Munir, H.S. Lubis; Jeefferie, Abd Razak; Amir Abdullah, Muhamad Damanhuri; A. U. Rahmah; M. N. A. A. Razak (Universiti Malaysia Perlis (UniMAP), 2020-05)
      The problem of the biomass waste produced from palm oil plantation is present today. The biomass waste typically is sourced from oil palm trunk (OPT), oil palm frond (OPF) and oil palm fruit bunch. Considering the huge ...

    • Mechanical properties of polyvinyl chloride and polypropylene hybrid polymeric nanocomposites for structural applications 

      Sihama, I. Al-Shalchy; Kadhum, M. Shabeeb; Ammar, M. Hasan; Rula, F. Hasan (Universiti Malaysia Perlis (UniMAP), 2020-04)
      In this work, mechanical properties for three types of polymeric blends and polymeric composites were fabricated and evaluated. The first group was prepared from (polyvinyl chloride: polypropylene (PVC: PP)) in different ...

    • Meso-porous-like tungsten oxide structure: a study on some physical properties at different deposited temperatures 

      Farhan, A. Mohamed; Azhar, I. Hassan; Evan T., Salim (Universiti Malaysia Perlis (UniMAP), 2022-10)
      Polycrystalline tungsten oxide (WO3) thin films were prepared using the spray pyrolysis method at various substrate temperatures (200, 250, 300, 350, and 400 °C) on the quartz substrate. The X-ray diffraction pattern showed ...

    • Metal oxide nanoparticles suspension for optoelectronic devices fabrication 

      Salem, Evan T.; Fakhry, Makram A.; Hassen, Hala (Universiti Malaysia Perlis, 2013)
      In the present work, simple and single step method has been used to prepare metal oxide Nanoparticles suspension, this done by laser ablation of pure metal in liquid, While direct spraying of the prepared of the prepared ...

    • Method for RSSI heat map estimation using Radial Basis Functions for fingerprinting localization 

      Fong Peng Wye, Kenny; Syed Muhammad Mamduh, Syed Zakaria; Latifah Munirah, Kamarudin; Ammar, Zakaria; Norhawati, Ahmad (Universiti Malaysia Perlis (UniMAP), 2021-12)
      Radio Frequency (RF) based indoor localization is a challenging task due to the dynamic and multipath factors although many research proposed different improvement strategies in their indoor localization works. This paper ...

    • Micro-Influence of vacuum block positions on machinability of acrylic using hybrid vacuum clamping system 

      M. Amirul Adli; N. Ab Wahab; M. Harezul Abd Razak; M. Ridzuan Azizzi; Mohd Hadzley, Abu Bakar; H. Sasahara (Universiti Malaysia Perlis (UniMAP), 2021-08)
      The double-sided vacuum clamper is used in this project to study the engraving and end mill machining output. This paper proposes a mechanical repair solution for clamping which does not leave any trace on the clamped ...