Search
Now showing items 1-7 of 7
The processing, characterization, and properties of fly ash based geopolymer concrete
(Advanced Study Center Co. Ltd, 2012)
In recent years, attempts to increase the utilization of fly ash as a replacement for ordinary Portland cement (OPC) in concrete have increased in significance. Geopolymer concrete does not need the presence of Portland ...
The influence of curing periods on the compressive strength of fly ash-based geopolymer at different aging times
(Trans Tech Publications, 2012)
The results of the current experimental investigation indicate the significant effect of the heating periods on the compressive strength of fly ash-based geopolymers prepared at different alkaline liquid content at both ...
Effect of alkali concentration on mechanical properties of kaolin geopolymers
(Procema SA, 2012)
Alkali concentration is the most significant factor in geopolymerization process that must be taken into consideration during the synthesis of kaolin geopolymers. The kaolin geopolymers were prepared by mixing kaolin and ...
Study on solids-to-liquid and alkaline activator ratios on kaolin-based geopolymers
(Elsevier Ltd., 2012-10)
Kaolin and alkali activator were mixed with the solids-to-liquid ratios in range of 0.60-1.20 (Al 2O 3/Na 2O molar ratio of 0.63-1.27). Sodium silicate and sodium hydroxide ranged between 0.16 and 0.36 (SiO 2/Na 2O molar ...
Effect of mechanical activation on kaolin-based geopolymers
(Trans Tech Publications, 2012)
Raw materials kaolin was subjected to mechanical modification; the effect of the mechanical activation of kaolin on the compressive strength and morphological properties of the geopolymers has been studied. Mechanical ...
Curing Behavior on kaolin-based geopolymers
(Trans Tech Publications, Switzerland., 2012)
This paper aims at investigating the influence of curing process on kaolin-based geopolymers. Kaolin-based geopolymers were prepared by the alkali-activation of kaolin with alkali activating solution (mixture of NaOH and ...
Mechanical properties of Sn-0.7Cu/Si 3N 4 lead-free composite solder
(Elsevier B.V., 2012-10)
The use of reinforcing high performance ceramic particulates in monolithic lead-free solder is one way to improve the service temperature and mechanical behavior of a solder joint. In this study, various compositions of ...