Search
Now showing items 21-30 of 144
A novel transporting system model for oil refinery: AL-Dura refinery, Iraq
(Universiti Malaysia Pahang (UMP), 2009-06-20)
Overfilling a tank or having too many tanks filled with oil is potentially a misuse of precious resources. In this paper, Oil terminal modeled by using a discrete event simulation program Arena for AL- Dura refinery, ...
Influence of temperature, heating rate and holding time on the fixed-bed pyrolysis of rice straw
(Universiti Malaysia Pahang, 2009-06-20)
Rice straw was pyrolysed in a fixedbed
reactor. The effect of pyrolysis temperature,
heating rate and holding time on the yield of the
products were investigated. Pyrolysis runs were
performed using pyrolysis temperatures ...
Effects of hole taper on high speed steel workpiece using EDM injection flushing
(Universiti Malaysia Pahang, 2009-06-20)
Electrical Discharge Machining
(EDM) is a controlled metal-removal process used
to remove metal by means of electrical spark
erosion. The objective of this paper is to
determine the effects of injection flushing on ...
Reference-pulse CNC parametric curve real-time interpolator parallel algorithm using parallel programming
(Universiti Malaysia Pahang, 2009-06-20)
This paper proposes a referencepulse
Computerized Numerical Control (CNC)
parametric curve real-time interpolator parallel
algorithm using parallel programming. The
algorithm uses an Open Multi-Processing
(OpenMP) ...
A new smart control system for energy saving
(Universiti Malaysia Pahang (UMP), 2009-06-20)
Air-conditioning and mechanical
ventilating system (ACMV) and lighting system
consume the most electrical energy in Malaysia.
In University Malaysia Pahang (UMP), the
appliances are sometimes switched on with no
occupants ...
1-ARMBOT: A single DOF Robot Arm using PIC Microcontroller
(Universiti Malaysia Pahang, 2009-06-20)
In industrial assembly applications
and also in material handling, pick and place robot
arms were extremely used. They usually have
three to six degree of freedom (DOF) and mainly
for manufacturing operations. This ...
Characterization of accelerated thermal degradation of LDPE using fourier transform infra red spectroscopy
(Universiti Malaysia Pahang, 2009-06-20)
The accelerated thermal
degradation of low-density polyethylene
(LDPE) using the Q-10 Rule was
characterized in air at atmospheric
pressure and temperature of 40oC. The
changes and shifting of FT-iR spectrum
due to ...
Properties of modified polystyrene lightweight aggregate in concrete
(Universiti Malaysia Pahang, 2009-06-20)
Several experiments were conducted
to characterize the properties of modified
polystyrene lightweight aggregate in concrete.
Microstructure of modified polystyrene
lightweight aggregate in concrete can be assessed
by ...
A study on floatability of copper using modified hallimond tube
(Universiti Malaysia Pahang, 2009-06-20)
The Floatability of copper on the
Modified Hallimond tube depend on lots of
parameters such as dosage and types of collector,
frother, air flow rate, flotation time, and pH value.
All of this parameters give different ...
Cascade PI control of an inverted pendulum using C# with knowledge base
(Universiti Malaysia Pahang (UMP), 2009-06-20)
This paper presents an inverted pendulum controlled
by cascade PI algorithm using Microsoft C#. Increment rotary
encoder will measure tilt angle and send feedback back to
controller for PI calculation. Signal from rotary ...