Search
Now showing items 1-10 of 17
Fly ash porous material using geopolymerization process for high temperature exposure
(MDPI AG (Basel, Switzerland), 2012-04)
This paper presents the results of a study on the effect of temperature on geopolymers manufactured using pozzolanic materials (fly ash). In this paper, we report on our investigation of the performance of porous geopolymers ...
Effect of alkali concentration on mechanical properties of kaolin geopolymers
(Foundation for Materials Science and Engineering, 2012)
Alkali concentration is the most significant factor in geopolymerization process that must be taken into consideration during the synthesis of kaolin geopolymers. The kaolin geopolymers were prepared by mixing kaolin and ...
Effect of curing regimes on metakaolin geopolymer pastes produced from geopolymer powder
(Scientific.Net/Trans Tech Publications, 2012-12)
The properties of metakaolin geopolymer paste are affected by the alkali concentration, the initial raw materials, solidification process, and amount of mixing water as well as the curing conditions. This study aimed to ...
Strength and microstructural properties of mechanically-activated kaolin geopolymers
(Trans Tech Publications, 2012-12)
Kaolin geopolymers exhibit low strength properties due to its plate-like nature which contribute to smaller surface area for geopolymerization reactions. Layered kaolin structure only allows very little, if any, substitution ...
Optimization of alkaline activator / fly ash ratio on the compressive strength of manufacturing fly ash-based geopolymer
(Trans Tech Publications, 2012)
Fly ash and a mixture of alkaline activators namely sodium silicate (Waterglass) and sodium hydroxide (NaOH) solution were used for preparing geopolymer. The aim of this research is to determine the optimum value of the ...
Optimization of solids-to-liquid and alkali activator ratios of calcined kaolin geopolymeric powder
(Elsevier Ltd, 2012-12)
This paper investigates the effect of S/L and alkali activator ratios on the synthesis of geopolymeric powder. Geopolymeric powder was synthesized by applying geopolymerization process. By adopting the concept of "just ...
Calcined kaolin geopolymeric powder: Influence of water- to geopolymeric powder ratio
(Trans Tech Publications, 2012-07)
This paper describes the synthesis of calcined kaolin geopolymeric powder from the alkaline activation of calcined kaolin followed by solidification and pulverizing process. The geopolymeric powder was used by just adding ...
Processing and characterization of calcined kaolin cement powder
(Elsevier Ltd, 2012-05)
Abstract
This paper aimed at investigating the possibility of calcined kaolin to produce cement powder that could be an alternative to Portland cement by applying geopolymerization process. Cement paste was firstly made ...
Influence of solidification process on calcined kaolin geopolymeric powder
(Trans Tech Publications, 2012-02)
This paper aims at investigating the influence of solidification condition on the processing of calcined kaolin geopolymeric powder. This is a new process developed using the geopolymerization process. Geopolymer slurry ...
A novel industrial waste filler brake pads
(Universiti Sains Malaysia, 2012-07-17)
Friction composite is an important of braking system for all types of vehicles especially as brake pad. Industry waste fiber is a novel invention is new friction materials with the existing brake pad in the market.