Browsing Kamarudin Hussin, Brig. Jen. Datuk Prof. Dr. by Subject "Wettability"

Now showing items 1-4 of 4

    • A comparative study of solder properties of Sn-0.7Cu lead-free solder fabricated via the powder metallurgy and casting methods 

      Mohd Arif Anuar, Mohd Salleh; Mohd Mustafa Al Bakri, Abdullah; Sandu, Andrei Victor; Norainiza, Saud; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; McDonald, Stuart D.; Nogita, Kazuhiro (Syscom 18 SRL, 2013-07)
      The properties of Sn-0.7Cu solder bulk prepared via the powder metallurgy (PM) method were investigated and compared with solder bulk fabricated through casting. Distinct microstructures were observed in both PM and casting ...

    • Effect of pyrolysis on the wettability behaviour of polyethylene terephthalate on petroleum coke 

      Sharifah Shahnaz, Syed Abu Bakar, Dr.; Khanna, Rita, Assoc. Prof.; Sahajwalla, Veena, Scientia Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Nik Noriman, Zulkepli; Sam, Sung Ting (Scientific.Net, 2012-12)
      In depth investigations has been carried out on thermoplastic polymers, polyethylene terephthalate (PET). The interaction between PET and PC substrate was studied to investigate the effect of oxygen-containing polymer on ...

    • Wettability and interfacial phenomena investigations on high-density polyethylene and petroleum coke 

      Sharifah Shahnaz, Syed Abu Bakar, Dr.; Khanna, Rita, Assoc. Prof.; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Sahajwalla, Veena, Scientia Prof. (Wiley Periodicals, Inc., 2012-08)
      An in-depth wettability and interfacial phenomena investigation was carried out to study interactions between high density polyethylene (HDPE) and petroleum coke. The aim is to investigate the effect of temperature and ...

    • Wettability, electrical and mechanical properties of 99.3Sn-0.7Cu/Si 3N4 novel lead-free nanocomposite solder 

      Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Khairel Rafezi, Ahmad, Dr.; Mohd Arif Anuar, Mohd Salleh; Muhammad Hafiz, Hazizi; Zainal Arifin, Ahmad, Prof. Dr. (Trans Tech Publications, 2011-07-04)
      A nanocomposite solder alloy with 99.3Sn-0.7Cu base alloy was successfully fabricated using the powder metallurgy route which consists of blending, compaction and sintering. Varying amount of nano size silicon nitride ...