Search
Now showing items 1-10 of 21
Compressive strength and morphology of fly ash based geopolymer as artificial aggregate with different curing temperature
(Trans Tech Publications, 2014)
This paper presented the compressive strength of geopolymer paste with different NaOH concentration and morphology analysis for sintered artificial aggregate. This artificial aggregate was produce based on mix design with ...
Microstructure study on optimization of high strength fly ash based geopolymer
(Trans Tech Publications, 2012)
The compressive strength and microstructural characteristics of fly ash based geopolymer with alkaline activator solution were investigated. The sodium hydroxide and sodium silicate were mixed together to form an alkaline ...
Microstructure study on volcano ash geopolymer aggregate at different sintering temperature
(Trans Tech Publications, 2014)
Recent research shows that the by-product materials such as fly ash can be used as raw material in producing aggregates and lightweight aggregates. The usage of this material can improve the quality of the aggregates ...
Effect on strength and hardness of clay ceramic substrate after treatment using koalin based geopolymer glaze
(Trans Tech Publications, 2014)
Geopolymerization is an alternative for ceramic industry by using clay based material such as kaolin or calcined kaolin geopolymer. Geopolymer paste is initially produced by alkaline activation of calcined kaolin with NaOH ...
Effect of Solids-To-Liquids, Na2SiO3-To-NaOH and Curing Temperature on the Palm Oil Boiler Ash (Si + Ca) Geopolymerisation System
(MDPI AG, 2015)
This paper investigates the effect of the solids-to-liquids (S/L) and Na2SiO3/NaOH ratios on the production of palm oil boiler ash (POBA) based geopolymer. Sodium silicate and sodium hydroxide (NaOH) solution were used as ...
A Review on the Manufacturing of Lightweight Aggregates Using Industrial By-Product
(EDP Sciences, 2016-10)
The waste materials from industrial are one of the concern issues in sustainable development. Recycle and reduce the waste material is one of the strategies to produce the better sustainable system. One of the methods is ...
Performance of geopolymer concrete when exposed to marine environment
(IOP Publishing Ltd, 2019-07)
Over the decades, concrete is widely known as the most resourceful construction material as it is suitable for many building applications. However, despite its ability to last hundreds of years in many applications, it has ...
Durability of geopolymer lightweight concrete infilled LECA in seawater exposure
(IOP Publishing Ltd, 2017-11)
This paper describes a development of lightweight concrete using lightweight expanded clay aggregate (LECA) in fly ash (FA) based geopolymer immersed in seawater. The objective of this research is to compare the performance ...
Influence of kaolin in fly ash based geopolymer concrete: destructive and non-destructive testing
(IOP Publishing Ltd, 2018-06)
Development of geopolymer concrete is mainly to reduce the production of ordinary Portland cement (OPC) that adverse the natural effect. Fly ash is a by-product collected from electrical generating power plant which resulted ...
Durability of fly ash based geopolymer concrete infilled with rubber crumb in seawater exposure
(IOP Publishing Ltd, 2018-06)
Geopolymer is an alternative binder to replace Ordinary Portland Cement (OPC)in construction industry. Source materials that rich in silica (Si) and alumina (Al) were activated by using alkaline solution. Production of ...