Search
Now showing items 21-30 of 48
Microstructure characterization of Al/Calcined Dolomite Metal Matrix Composites
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)
Al/calcined dolomite metal-matrix composites (MMC) were fabricated and tested by varies the calcined dolomite content (10-30 wt%) and using unidirection compaction and sintering as consolidation method. Upon incorporation ...
Studies on properties of Molybdenum filed Polypropylene composites
(Institut Teknologi Brunei, 2008-11-03)
Molybdenum filled polypropylene (PP/Mo) composites were prepared by using the Z-blade
mixer at processing temperature 190°C and a speed of 35rpm with different filler loading
varying between 0% and 40% by weight. A ...
Physical properties of Al/Calcined Dolomite Metal Matrix composite by Powder Metallurgy Route
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)
Calcined dolomite is dolomite powder that had been calcined at high temperature. This paper describes the fabrication of aluminum metal matrix composite reinforced with calcined dolomite by powder metallurgy route. The ...
Tensile properties of kenaf/unsaturated polyester composites filled with a montmorillonite filler
(Wiley Periodicals, Inc., 2011-03-05)
Kenaf/unsaturated polyester composites filled with montmorillonite (MMT) filler were produced. Overall, the study showed that, for samples with kenaf filler only, the strength properties decreased as the kenaf filler loading ...
The effect of compatibilizer on tensile properties, swelling behaviour and morphology of Calcium Carbonate filled Polypropylene/Ethylene Propylene Diene Terpolymer composites
(Universiti Kuala Lumpur (UniKL), 2007-11-27)
Calcium carbonate (CaCO3) was used as filler in the polypropylene (PP)/ ethylene propylene diene terpolymer (EPDM) composites in order to decrease cost and change the properties. The composites were prepared by using a ...
The effects of dynamic vulcanization and compatibilizer on properties of paper sludge-filled polypropylene/ethylene propylene diene terpolymer composites
(Wiley Periodicals, 2007)
The effects of dynamic vulcanization (DV) and dynamic vulcanization plus compatibilizer (DVC) of paper sludge (PS) filled polypropylene/ethylene propylene diene terpolymer (PP/EPDM) composites on torque development, ...
Study of wear on anodised PM Aluminium Matrix composite reinforced with 15 wt % Saffil Alumina Short Fibre
(Universiti Malaysia Perlis, 2007-06-09)
A study of wear behaviour on anodised powder metallurgy aluminium matrix composites (PM AMC) reinforced with Saffil™ alumina short fibres was done. AMC was fabricated by powder metallurgy methods (PM) with using Al flake ...
Mechanical and Morphology Properties of Egg-Shell Powder (ESP) Filled Low Density Polyethylene Composites
(Universiti Kuala Lumpur (UniKL), 2007-11-27)
Mechanical and morphology properties of low density polyethylene/egg shell powder composites were examined. Composites were prepared in Z-Blade Mixer. Mixing was done at 1600C and rotor speed of 50 rpm. Sample of composite ...
Thermal analysis of Paper Sludge and Kaolin Filled Polypropylene (PP)/Ethylene Propylene Diene Terpoymer (EPDM) hybrid composites: the effect of MAPP and LICA
(Kolej Universiti Kejuruteraan Utara Malaysia, 2006)
Paper sludge, one of cellulosic materials, is a by product during paper manufacture. Polypropylene (PP)/ethylene propylene diene terpolymer (EPDM) hybrid composites were
made using kaolin and paper sludge (PS) filler as ...
The Effect of Coupling Agent on Thermal Properties and Morphology of Paper Sludge Filled Polypropylene (PP)/Ethylene Propylene Diene Terpolymer (EPDM) Composites
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)
The paper sludge was used as a filler in PP/EPDM composites and 3-aminopropyl triethoxysilane (3-APE) was used as a coupling agent in this study. The effects of filler loading and 3-APE on the thermal properties and ...