Search
Now showing items 1-8 of 8
The Effect of Porosity on Thermal Conductivity of Silicon Carbide Filled Polyproplyene Composite
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)
Silicon carbide filled Polypropylene (PP) composites are fabricated, where the compounding is carried out by using Z-blade mixer with filler loadings of 0wt%, 10wt%, 20wt% and 30wt%. Composite sheets produced from hot press ...
Flexural properties of natural fiber filled high density Polyethylene (HDPE) composites
(Universiti Sains Malaysia (USM), 2008-11-26)
Attempt has been made to combine the advantages of natural fiber and polymer. Composites based on high density polyethylene (HDPE) and two types of natural
fiber were made through melt blending and compression molding. ...
Microstructure characterization of Al/Calcined Dolomite Metal Matrix Composites
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)
Al/calcined dolomite metal-matrix composites (MMC) were fabricated and tested by varies the calcined dolomite content (10-30 wt%) and using unidirection compaction and sintering as consolidation method. Upon incorporation ...
Studies on properties of Molybdenum filed Polypropylene composites
(Institut Teknologi Brunei, 2008-11-03)
Molybdenum filled polypropylene (PP/Mo) composites were prepared by using the Z-blade
mixer at processing temperature 190°C and a speed of 35rpm with different filler loading
varying between 0% and 40% by weight. A ...
Physical properties of Al/Calcined Dolomite Metal Matrix composite by Powder Metallurgy Route
(Universiti Malaysia Perlis (UniMAP), 2007-06-09)
Calcined dolomite is dolomite powder that had been calcined at high temperature. This paper describes the fabrication of aluminum metal matrix composite reinforced with calcined dolomite by powder metallurgy route. The ...
Morphology studies of treated and untreated Silicon carbide filled Polypropylene composites
(Universiti Malaysia Perlis, 2007-05-15)
Silicon carbide filled Polypropylene (PP) composites are fabricated, where the compounding is carried out by using Z-blade mixer with filler loadings of Owt%, 10wt%, 20wt% and 30wt%. In order to improve compatibility between ...
Effect of kenaf fibre Mat layers and Zinc Oxide Nanoparticle Concentration on the Mechanical and Thermal Properties of ZnONPs/kenaf/polyester Composites
(IOP Publishing, 2018)
Zinc oxide nanoparticle kenaf polyester composite (ZnONPs/kenaf/polyester)
containing 1, 2, 3 and 4 layers of kenaf fibre treated with 40nm 2% (w/w) and 5 % (w/w ) of
ZnONPs were prepared and characterised to evaluate ...
Effect of Kenaf Fibre Layers on Mechanical and Thermal Properties of Kenaf/Unsaturated Polyester Composites
(IOP Publishing, 2018)
Composites of kenaf/unsaturated polyester containing 1layer up to 4 layers of kenaf fibre were studied to evaluate the mechanical and thermal properties. These composites were compared with a control system containing ...