Browsing Researchers by Author "Che Mohd Ruzaidi, Ghazali"

Now showing items 21-40 of 42

    • Hot corrosion behaviour of Austenitic Steel-308 in Chloride salts 

      Mohammed Misbahul, Amin; Che Mohd Ruzaidi, Ghazali; Neelofar, Amin (School of Materials Engineering, 2008)
      The intensification of process engineering in almost every branch of modern technology, and development of new technologies make increasingly higher requirements for metallic construction materials, especially for their ...

    • Influence of solidification process on calcined kaolin geopolymeric powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Binhussain, M.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Cheng, Yong Heah (Trans Tech Publications, 2012-02)
      This paper aims at investigating the influence of solidification condition on the processing of calcined kaolin geopolymeric powder. This is a new process developed using the geopolymerization process. Geopolymer slurry ...

    • Kaolin Geopolymer as precursor to ceramic formation 

      Nur Ain, Jaya; Mohd Mustafa Al Bakri, Abdullah; Che Mohd Ruzaidi, Ghazali; Mohammed, Hussain; Kamarudin, Hussin; Romisuhani, Ahmad (EDP Sciences, 2016)
      This paper introduced the potential application of kaolin geopolymer as ceramic precursor. This is one of the alternatives to produce high strength ceramic at a slightly lower temperature. Upon sintering the conversion of ...

    • KUKUM Impreg Wood 

      Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin; Shamsul Baharin, Jamaludin; Khairul Nizar, Ismail (Malaysian Invention & Design Society (MINDS), 2006)
      This KUKUM Impreg Wood used the thermoplastic resin (for example polystyrene) as a replacement to the conventional thermoset impregnation resin in order to enhance the treated wood properties and life-time without affected ...

    • Mechanical properties and wear behavior of brake pads produced from palm slag 

      Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Shamsul Baharin, Jamaludin, Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Rafiza, Abdul Razak (Trans Tech Publications, 2012)
      Brake pads are important safety devices in vehicles. An effort to avoid the use of asbestos in brake pads has led to the development of asbestos-free brake pads that incorporate various organic and inorganic fillers. Palm ...

    • Morphology and properties of geopolymer coatings on glass fibre-reinforced epoxy (GRE) pipe 

      Noor Fifinatasha, Shahedan; Mohd Mustafa Al Bakri, Abdullah; Che Mohd Ruzaidi, Ghazali; Mohammed, Binhussain; Al Husaini, Mohammed; Kamarudin, Hussin (EDP Sciences, 2016)
      Geopolymer coatings were coated on glass fibre-reinforced epoxy (GRE) pipe by using kaolin, white clay and silica sand as source materials and sodium hydroxide (NaOH) and sodium silicate (Na2SiO3) as alkaline solution. The ...

    • Natural Fiber Filament Wound Composites: A Review 

      Suriyati, Mohamed Ansari; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin (EDP Sciences, 2017)
      In recent development, natural fibers have attracted the interest of engineers, researchers, professionals and scientists all over the world as an alternative reinforcement for fiber reinforced polymer composites. This is ...

    • Natural Fiber Filament Wound Composites: A Review 

      Suriyati, Mohamed Ansari; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin (EDP Sciences, 2017-02)
      In recent development, natural fibers have attracted the interest of engineers, researchers, professionals and scientists all over the world as an alternative reinforcement for fiber reinforced polymer composites. This is ...

    • Optimization of processing parameters for graphitization of oil palm trunk waste at lower heating temperature 

      N. A., Karim; Che Mohd Ruzaidi, Ghazali; M. M., Ramli; Sandu, A. V.; Chirila, E.; Mohd Mustafa Al Bakri, Abdullah (IOP Publishing Ltd, 2019-07)
      Previously synthetic graphite was produced at higher temperature which is around 2,500°C in complex processing method. The method bear the name of the scientist whose discover the synthetic graphite namely "Acheson Process". ...

    • Optimization of solids-to-liquid and alkali activator ratios of calcined kaolin geopolymeric powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Binhussain, M.; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Cheng, Yong Heah (Elsevier Ltd, 2012-12)
      This paper investigates the effect of S/L and alkali activator ratios on the synthesis of geopolymeric powder. Geopolymeric powder was synthesized by applying geopolymerization process. By adopting the concept of "just ...

    • Pencirian Batu Reput di Negeri Perlis menggunakan XRD dan SEM 

      Mohd Nazry, Salleh; Khairul Nizar, Ismail; Kamarudin, Hussin; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali (Kolej Universiti Kejuruteraan Utara Malaysia, 2006-06-15)
      Pencirian batu reput yang diperolehi daripada pembekal Tasuh Kuari Sdn. Bhd. dilakukan dengan menggunakan Pembelauan Sinar-X (XRD) dan Mikroskop Imbasan Elektron dengan penganalisa spektrometer serakan tenaga sinar-x ...

    • Preliminary study on compressive strength of modified Polystyrene (MPS) as lightweight aggregate 

      Fetra Venny Riza, Z; Mohd Mustafa Al Bakri, Abdullah; Khairul Nizar, Ismail; Che Mohd Ruzaidi, Ghazali; Mohammad Tamizi, Selimin (Universiti Malaysia Perlis, 2008-03-15)
      This research investigates the possibility of making polystyrene as lightweight aggregate. Low density is the advantage of polystyrene. Waste polystyrene foam is modified and sintered in the furnace at the temperatures ...

    • Preliminary study on concrete with Polystrene waste coarse aggregate 

      Mohd Mustafa Al Bakri, Abdullah; Che Mohd Ruzaidi, Ghazali; Norazian, Mohd Noor; Kamarudin, Hussin; Abu Bakar, Mohamad Diah; Mohd Tajuddin, Mohd Idris (2007)
      Polystrene wastes are becoming a major environment concern; due to its large production quantities and its non-biodegrable nature. Provided that the high molecular-weight material can be broken down into useful low ...

    • Preliminary study on concrete with polystyrene waste coarse aggregate 

      Mohd Mustafa, Al Bakri Abdullah; Che Mohd Ruzaidi, Ghazali; Norazian, Mohamed Noor; Kamarudin, Hussin; Abu Bakar, Mohamad Diah; Mohd Tajuddin, Mohd Idris (Construction Industry Development Board, Malaysia (CIDB), Construction Research Institute of Malaysia (CREAM) & Universiti Teknologi MARA (UiTM), 2007-03-14)
      Polymer recycling has received a great deal of attention in this recent year. Presently, small percentage of polymer wastes in Malaysia has been under going the recycling process. This recycling process has typically been ...

    • Processing and characterization of calcined kaolin cement powder 

      Liew, Yun Ming; Kamarudin, Hussin, Brig. Jen. Dato' Prof. Dr.; Mohd Mustafa Al Bakri, Abdullah; Luqman, Musa, Dr.; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Cheng, Yong Heah (Elsevier Ltd, 2012-05)
      Abstract This paper aimed at investigating the possibility of calcined kaolin to produce cement powder that could be an alternative to Portland cement by applying geopolymerization process. Cement paste was firstly made ...

    • Reactive compatibilizers on mechanical and morphology properties of Poly(vinyl chloride) / Polyisopere blends 

      Supri, A. Ghani; Salmah, Husseinsyah; Che Mohd Ruzaidi, Ghazali (Universiti Malaysia Perlis, 2007)
      In this works, an experimental was performed do determine the influence of reactive compatibilizers of poly (vinyl chloride) / polyisoprene blends. The effect of methyl methacrylate and acrylic acid contents on mechanical ...

    • Role of clay (Bentonite) on mold making process in foundry metallurgy 

      Mohd Ichwan, Nasution; Mohd Nasir, Zainal Arif; Che Mohd Ruzaidi, Ghazali; Khairel Rafezi, Ahmad; Faizul, Che Pa; Mohd Fitri, Mohamad Wahid; Murizam, Darus (Universiti Kebangsaan Malaysia (UKM), 2008-12-03)
      The foundry engineer is usually familiar with the fact that there are different types of clay,such as kaolinite and montmorillonite (bentonite). The bonding action of kaolinite in moulding sands results from the free ionic ...

    • Stability of Perlis dolomite under various heating condition 

      Mohd Nazry, Salleh; Khairul Nizar, Ismail; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin; Farizul Hafiz, Kasim; Saiful Azhar, Saad; Suhardy, Daud (Universiti Teknologi Mara (UiTM), 2006-12-08)
      Dolomite is a yellowish colored rock that can be found abundantly in Perlis. The rock has been used traditionally either to cover the rural road before it is tarred or to normalize the soil before any crops is planted. ...

    • A study of clinker microstructure using scanning electron microscope 

      Mohd Sobri, Idris; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Kamarudin, Hussin; Khairul Nizar, Ismail (Malaysian Institute for Nuclear Technology Research (MINT), 2006-11-29)
      This paper presents a study of clinker microstructure using Scanning Electron Microscope with Energy Dispersive Spectrometer (SEM-EDS). Use of SEM-EDS allows measuring bulk phase abundance and surface areas of the phases, ...

    • Study on solids-to-liquid and alkaline activator ratios on kaolin-based geopolymers 

      Cheng, Yong Heah; Kamarudin, Hussin, Brig. Gen. Dato' Prof. Dr.; Mohd Mustafa Al-Bakri, Abdullah; Mohammed, Hussain; Luqman, Musa; Khairul Nizar, Ismail, Assoc. Prof. Dr.; Che Mohd Ruzaidi, Ghazali; Liew, Yun Ming (Elsevier Ltd., 2012-10)
      Kaolin and alkali activator were mixed with the solids-to-liquid ratios in range of 0.60-1.20 (Al 2O 3/Na 2O molar ratio of 0.63-1.27). Sodium silicate and sodium hydroxide ranged between 0.16 and 0.36 (SiO 2/Na 2O molar ...