Browsing Researchers by Title

Now showing items 1331-1350 of 3487

    • Fabrication and properties of Aluminium reinforced calcined dolomite and ferrosilicon by powder metallurgy route 

      Banjuraizah, Johar (Universiti Malaysia PerlisSchool of Materials Engineering, 2007)

    • Fabrication of 3C-silicon carbide membranes: Towards development of novel microdevices for biomedical applications 

      Nashrul Fazli, Mohd Nasir; Charan, M. Shah; Leech, Patrick William; Reeves, Geoffrey K.; Pirogova, Elena; Istivan, Taghrid S; Tanner, Philip G.; Holland, Anthony Stephen (Institute of Electrical and Electronics Engineers (IEEE), 2012-02-27)
      3C-SiC is currently under intense study as a potential material for implantable low power blood pressure sensing due to its biocompatibility. In this work, we present and discuss the fabrication processes for n-type 3C-SiC ...

    • Fabrication of a Hand-held Electronic Nose 

      Marni Azira, Markom; Ali Yeon, Md Shakaff; Abdul Hamid, Adom; Mohd Noor, Ahmad; Abu Hassan, Abdullah (Universiti Malaysia Perlis, 2007)
      An electronic nose is a device that performs the electronic olfactory to substitute human experts. The development of these devices is growing faster due to higher demand. However, current electronic noses usually are very ...

    • Fabrication of Amorphous silicon Microgap Structure for Energy Saving Devices 

      Thikra, S. Dhahi; Uda, Hashim; Md. Eaqub, Ali; Nazwa, Taib (Universiti Kebangsaan Malaysia, 2011-11-18)
      We report here the fabrication of microgaps electrodes on amorphous silicon using low cost techniques such as vacuum deposition and conventional lithography. Amorphous silicon is a low cost material and has desirable ...

    • Fabrication of amorphous silicon microgap structure for energy saving devices 

      Dhahi, T.H.S.; Uda, Hashim, Prof. Dr.; Md. Eaqub, Ali; Nazwa, T. (Sains Malaysiana., 2012-06)
      We report here the fabrication of microgaps electrodes on amorphous silicon using low cost techniques such as vacuum deposition and conventional lithography. Amorphous silicon is a low cost material and has desirable ...

    • The fabrication of artificial marble from dolomite (Batu Reput) 

      Kamarudin, Hussin; Shamsul Baharin, Jamaludin; Che Mohd Ruzaidi, Ghazali; Mohd Sobri, Idris; Mohd Nazry, Salleh; Mohabattul Zaman, S NS Bukhari; Khairul Nizar, Ismail (The Mineral, Metals & Materials Society (TMS), 2006-01)
      Perlis is one of the major producers of "Batu Reput" in Malaysia and majority of the deposits contain of high-purity calcium and magnesium carbonate. The composition of Batu Reput is similar with the ordinary dolomite. ...

    • Fabrication of BaTiO3 thin films through ink-jet printing of TiO2 sol and soluble Ba salts 

      Yeoh, Cheow Keat, Dr.; Srimala Sreekantan; Sabar Derita Hutagalung; Zainal Arifin, Ahmad (Elsevier Ltd., 2007)
      BaTiO3 thin films were prepared by ink-jet printing aqueous solutions of TiO2 sol and soluble Ba salts. Higher pH values (pH > 13) as well as higher than stoichiometric Ba (Ba:Ti = 1.1:1) salt additions were required to ...

    • Fabrication of calcium phosphate coating on pure magnesium substrate via simple chemical conversion coating: surface properties and corrosion performance evaluations 

      Mohd Amin, Farhan Zaludin; Zul Azhar, Zahid Jamal; Mohd Nazree, Derman; Mohd Zaheruddin, Kasmuin (Elsevier, 2018)
      The main objective of the current work was to fabricate calcium phosphate (CaP) coating on 99.9% purity magnesium, Mg substrate through simple chemical conversion method and evaluated the surface properties and corrosion ...

    • A fabrication of intelligent spiral reconfigurable beam forming antenna for 2.35 2.39GHz applications and path loss measurements 

      Muzammil, Jusoh, Dr.; Mohd Faizal, Jamlos, Dr.; Muhammad Ramlee, Kamarudin, Assoc. Prof. Dr.; Sabapathy, Thennarasan; Mohd Ilman, Jais; Mohd A., Jamlos (EMW Publishing, 2013)
      A reconfigurable beam forming antenna prototype using a spiral feed line is proposed in this paper. The presented antenna is integrated with PIN diode switches at a specific location of spiral feed line. It is discovered ...

    • Fabrication of nanostructure based biosensor for biomolecules detection 

      Shahrul Aizzam, Ariffin; Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Faridah, Salam; Zamri, Ishak; Muhammad Nur Aiman, Uda (Trans Tech Publications, 2014)
      Lately, nanostructure based biosensor application has drawn a lot attention among fellow researchers because of speciality to detecting cell, tissue and even disease caused by viruses either from humans, animals or ...

    • Fabrication of nanowire using ash trimming technique 

      Tijjani Adam, Shuwa; Uda, Hashim, Prof. Dr.; Leow, Pei Ling; Qazi Muhammad, Humayun (Trans Tech Publications, 2013)
      The paper present a report on fabrication of Nanowire using plasma oxidation, we monitor changes by studying the morphology and Δw/Δh, the study also revealed that the proposed fabrication method could potentially be used ...

    • Fabrication of polysilicon nanowires using trimming technique 

      Uda, Hashim, Prof. Dr.; Shahrul Aizzam, Ariffin; Tijjani Adam (AENSI Publications, 2012-04)
      Recently most researches are more to scaling down the electronic devices and this fact including component, structure and complexity of electronic devices. These matters also include fabrication of nanowires in certain ...

    • Fabrication of polysilicon nanowires using trimming technique 

      Uda, Hashim, Prof. Dr.; Shahrul Aizzam, Ariffin; Tijjani Adam, Shuwa (AENSI Publications, 2012-04)
      Recently most researches are more to scaling down the electronic devices and this fact including component, structure and complexity of electronic devices. These matters also include fabrication of nanowires in certain ...

    • Fabrication of porous ceramic-geopolymer based material to improve water absorption and retention in construction materials: a review 

      Noorina Hidayu, Jamil; ‪Wan Mohd Arif, W Ibrahim; Mohd Mustafa Al Bakri, Abdullah; Sandu, Andrei Victor; Muhammad Faheem, Mohd Tahir (IOP Publishing Ltd, 2017-06)
      Porous ceramic nowadays has been investigated for a variety of its application such as filters, lightweight structural component and others due to their specific properties such as high surface area, stability and permeability. ...

    • Fabrication of silicon nanowires by electron beam lithography and thermal oxidation size reduction method 

      Mohammad Nuzaihan, Md Nor; Uda, Hashim, Prof. Dr.; Nazwa, Taib; Tijjani Adam, Shuwa (Trans Tech Publications, 2014)
      A simple method for the fabrication of silicon nanowires using Electron Beam Lithography (EBL) combined with thermal oxidation size reduction method is presented. EBL is used to define the initial silicon nanowires of ...

    • Fabrication of silicon nitride ion sensitive field-effect transistor for pH measurement and DNA immobilization/hybridization 

      Uda, Hashim, Prof. Dr.; Soon, Weng Chong; Liu, Wei Wen, Dr. (Hindawi Publishing Corporation, 2013)
      The fabrication of ion sensitive field-effect transistor (ISFET) using silicon nitride (Si3N4) as the sensing membrane for pH measurement and DNA is reported. For the pH measurement, the Ag/AgCl electrode was used as the ...

    • Face emotion recognition 

      Mohd Rizon, Mohamed Juhari; M., Karthigayan; Ramachandran, Nagarajan, Prof. Dr.; Sazali, Yaacob, Prof. Dr.; M., Rozailan; M., Sugisaka; Hazry, Desa, Dr. (Universiti Malaysia Perlis (UniMAP)Pejabat Timbalan Naib Canselor (Penyelidikan dan Inovasi), 2007-01)

    • Face Emotion Recognition - A survey 

      Kartigayan, M.; Mohamed Rizon, Mohamed Juhari; Sazali, Yaacob; Nagarajan, R. (Oita University, 2006-01-23)
      The facial emotion is playing a vital role in visual communication system. The vision system is being integrated to the robot to recognize the facial gestures or emotion. The integration of the vision system and EMG sensors ...

    • Face Reader Using Single Board Computer & GNU-Linux 

      Ali Yeon, Md. Shakaff, Prof. Dr.; R. Badlishah, Ahmad, Assoc. Prof. Dr.; Mohd Rizon, Mohamed Juhari, Assoc. Prof. Dr.; Ahmad Nasir, Che Rosli; Wan Muhammad Azmi, Mamat (Malaysian Invention and Design Society (MINDS), 2007-05-18)
      Embedded system for biometric identification based on iris detection.

    • A face recognition system using template matching and neural network classifier 

      Muhammad Firdaus, Hashim; Puteh, Saad; Mohamed Rizon, Mohamed Juhari; Shahrul Nizam, Yaakob (Kolej Universiti Kejuruteraan Utara Malaysia, 2005-05-14)
      We develop a technique to identify an unknown person in a face image by using template matching and neural network classifier. The technique is separated into three main steps namely; preprocessing, feature extraction and ...