Browsing School of Microelectronic Engineering (Theses) by Title
Now showing items 5-24 of 57
-
Design and analysis of 90 nm two-stage operational amplifier using floating-gate MOSFET
Low voltage, low power dissipation, high gain and matching are some of the concern when designing an analog circuit. A very low voltage can increase battery lifetime and integration density as market demands. Floating-gate ... -
Design and characterization of self-switching diode and planar barrier diode as high-frequency rectifiers
The development of high-speed rectifying devices has become one of major research areas which can be utilized in many applications, including radio-frequency (RF) and detection systems. Examples of these devices are ... -
Design and fabrication of a wideband CMOS continuous-time integrated baseband active filter for a synthetic aperture radar receiver
This thesis presents the design and fabrication of CMOS continuous-time lowpass integrated baseband filters intended for a fully integrated multiband Synthetic Aperture Radar (SAR) receiver. The low-pass filters are part ... -
Design and fabrication of quantum dot single electron transistors using scanning electron microscopy-based electron-beam nanolithogrphy
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2009)Quantum dot single-electron transistor (QD SET) is a nanoscale device operated at very low temperature. To fabricate QD SET operated at room temperature, QD must be fabricated in diameter of 10 nm. QD SET promises very ... -
Design of DC high voltage low current power supply using DC-DC converter and cockcroft-walton (C-W) voltage multiplier
A high dc voltage with low power consumption is used in cryogenic cooling for the purpose of cooling system. In order to accomplish the high dc voltage, numerous efforts are carried out to determine a new method of ... -
Design of subsystems for multiband wireless transceiver
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2010)This thesis deals with the development of subsystems for wireless application. The subsystems are Low Noise Amplifier (LNA), Medium Power Amplifier (MPA), Demodulator, Variable Signal Generator (VSG) and Voltage for ... -
Design, fabrication and characterization of CMOS ISFET for pH measurements
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2009)The Ion Sensitive Field Effect Transistor (ISFET) is a potentiometric pH sensor that is easily adapted to a wide range of chemical, biochemical and biomedical applications. The operation of an ISFET is based on the ... -
Design, simulation and process development for Sol Single-Electron Transistor (SET) fabrication
(Kolej Universiti Kejuruteraan Utara Malaysia (KUKUM)School of Microelectronic Engineering, 2006-04)Single-electron transistor (SET) is one of the promising nanotechnologies and distinguished by a very small device size and low power dissipation. This project explains the SET mask design, SET process flow development, ... -
Development of Hybrid GA-PSO for optimal design of valveless micropump in biomediacal application
Micropumps are one of the most important components of microfluidic and microelectromechanical system (MEMS) because of the ability to transport fluids in microscale and have the control of the flow rate in an accurate and ... -
Development of microgap and nanogap automated permittivity measurement system
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2011)The goal of this research is to develop an electronic system that integrated with nanogap capacitor biosensor. This system is called Permittivity Measurement System (PMS). It measures the impedance value of the nanogap ... -
Development of reflectance intensity based microcontroller for fibre compactness analysis
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2013)Quality is an integral element in human life. All industries ranging from medical, electronic, automotive, aviation, textile, food, to wood and paper possess some sort of quality control element in both the output and ... -
Development of RF to DC conversion circuit for energy harvesting
The demand of wireless application devices shows significant growth in this era. This leads to the needs of a long life battery unit to supply power for wireless devices. Thus, the idea of fulfilling this demand is by ... -
Development of SOA-MZI based logic gates and all-photonics flip flop
Photonics logic gates are actually logic gates that performs various logical functions such as AND, OR and NOT but instead of using electrons, they operate on using light as the main mechanism. XOR logic gates are commonly ... -
The effect of Phosphorous implant in converting the Enhancement Mode Transistor into Depletion Mode Transistor
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2008)Metal-Oxide-Semiconductor field effect transistor (MOSFET) forms the basis in most of electronic applications. In certain part of electronic circuitry, there is a requirement to use depletion mode of MOSFET which delivers ... -
An efficient modified booth multiplier architecture
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2008)Multiplier plays an important role in today’s compute intensive applications such as computer graphics and digital signal processing. This thesis described the design of an Efficient Modified Booth Multiplier Architecture. ... -
Fabrication and characterization of engineered tunnel barrier for nonvolatile memory application
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2012)Non-volatile memory is a solid state memory device that can retain the stored information even when the power is turned-off; examples of a variety of ROMs and Flash Memory. Based on the charge storing mechanism, it can be ... -
Fabrication and characterization of microfluidic field effect transistor on silicon substrate
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2010)The development of a silicon-based microfluidic field effect transistor has been carried out. The main objective of this study is to present from concept, the design of a microfluidic FET and to develop its appropriate ... -
Fabrication and characterization of silicon based vertical electrode nanogap biosensor for protein detection
(Universiti Malaysia PerlisSchool of Microelectronic Engineering, 2009)The nanogap biosensor is a new class of device that has attracted attention and great interest among the researchers due to their potential applications in nanotechnology. This nanogap device which are fabricated using ... -
Fabrication and characterization of ultra thin Si0₂ for nano devices: surface morphology and electrical study
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2007)The aim of this research is to fabricate and characterize (optical and electrical) an ultra thin silicon dioxide for sub nano devices. In this research, dry oxidation method using high temperature furnace is chosen to ... -
Fabrication and chracterization of single and multilayer tunnel dielectrics for advanced floating gate flash memory
(Universiti Malaysia Perlis (UniMAP)School of Microelectronic Engineering, 2014)The floating gate device has been the workhorse for the non-volatile memory technology since the beginning of flash memory era. However, as the device is scaled down towards the realms of nanometer dimension, floating gate ...