Search
Now showing items 1-6 of 6
High temperature corrosion behaviour of austenitic stainless steel with CaCO₃ and MgCO₃ deposit
(Universiti Malaysia Perlis (UniMAP), 2009)
The high temperature corrosion behaviour of austenitic stainless steel was studied at
850°C, 900°C, 950°C and 1000°C for 24 to 120 hr exposure time with CaCO₃ and
MgCO₃ deposit. Two commercial available austenitic stainless ...
Physical properties and corrosion behaviour of Co-Cr-Ni alloy developed by powder metallurgy
(Universiti Malaysia Perlis (UniMAP), 2011)
Cobalt-based alloys have been widely used in biomedical application. In this research, 11 different compositions of cobalt-chromium-nickel (Co-Cr-Ni) alloys were developed by powder metallurgy route. Scanning electron ...
Development of anodised aluminium oxide nanostructure from Al-Mn alloy
(Universiti Malaysia Perlis (UniMAP), 2013)
This study was divided into two parts. The first part of the study was focused on
the synthesis of well ordered porous AAO by using oxide dissolution treatment. The
porous AAO was formed by anodising of 99.99 % aluminium ...
Microstructure and properties of sintered Co-Cr-Mo alloy powder under different processing conditions
(Universiti Malaysia Perlis (UniMAP), 2011)
Co-Cr-Mo (ASTM F-75) alloy is one of the most important metallic biomaterials that are
commonly used for surgical implant due to its mechanical properties, good wear resistance
and biocompatibility. This study has focused ...
Pengoptimuman parameter penuangan untuk Aloi Magnesium (Mg) sebagai anod korbanan bagi kegunaan bawah tanah
Perlindungan katod merupakan kaedah yang digunakan secara meluas bagi mengawal kadar kakisan terhadap bahan berunsur logam di dalam persekitaran bawah tanah yang berair. Pengunaan anod korbanan merupakan antara kaedah ...
The evolution of microstructures and properties due to materials tool interaction during friction stir welding of similar and dissimilar al and Cu alloys
In this work, main similar (6061 aluminum alloy) and dissimilar (commercially pure aluminum and copper) materials were butt joined via friction-stir welding (FSW). The influence of FSW parameters, namely, small pin geometry, ...