Search
Now showing items 1-10 of 15
The effect of the processing conditions on the mechanical and dielectric properties of epoxy foam
(Universiti Malaysia Perlis (UniMAP), 2011)
Epoxy foam was fabricated using sodium bicarbonate as the blowing agent. The epoxy foams were prepared using mechanical mixing method. Epoxy used in this study was product of bisphenol A and epichlorohydrin and the curing ...
The effect of layer number on mechanical properties and dimensional stability of hybrid kenaf-glass fiber unsaturated polyester composite
(Universiti Malaysia Perlis (UniMAP), 2014-03)
Hybrid kenaf-glass fiber unsaturated polyester composite was prepared by hand
lay-up technique. The kenaf was used in a fiber mat form. The effect of layer number of
hybrid kenaf-glass fiber unsaturated polyester composite ...
The effect of filler loading and coupling agent on properties of bentonite filled recycled high density polyethylene composites
(Universiti Malaysia Perlis (UniMAP), 2014)
Recycled high density polyethylene/ bentonite (RHDPE/Bentonite) composites had
been prepared using Brabender Plasticorder at temperature 160˚C and rotor speed of 50 rpm. The effect of Bentonite loading and coupling agent ...
Fabrication and properties of Cobalt-Chromium implant composite
(Universiti Malaysia Perlis, 2007)
Cobalt implant composite (CIC) was produced by powder metallurgy technique. Composition of 0% ,5%, 10%, 15% and 20% of hydroxyapatite was mixed with cobaltchromium
alloy. The fabrication technique is mixing, blending, ...
Pencirian dan potensi Dolomit Perlis sebagai pengisi dalam produk komposit Termoset
(Universiti Malaysia Perlis, 2007)
Dolomit merupakan sejenis mineral yang didapati dengan banyaknya di negeri Perlis.
Negeri Perlis merupakan antara pengeluar terbesar dolomit di Malaysia. Kajian ke atas
dolomit dilakukan untuk menambah nilai dolomit ini ...
Properties of water hyacinth fibers (Eichhornia crassipes) filled low density polyethylene/acrylonitrile butadiene styrene composites
(Universiti Malaysia Perlis, 2009)
The water hyacinths are largely available in local rivers. In this research, the water hyacinth fibers have been used as reinforcing components for low density polyethylene (LDPE) and acrylonittile butadiene styrene (ABS). ...
Properties of eggshell powder filled low density polyethylene/ acrylonitrile butadiene styrene composites
(Universiti Malaysia Perlis, 2009)
Eggshell powder is one of the most abundant materials on our planet and has been quite early used in ground form to produce polymer composites. Chemical unmodified and modified eggshells powder filled low density polyethylene ...
Study of a palm slag-filled friction composite for brake pad
(Universiti Malaysia Perlis (UniMAP), 2014)
Since the use of asbestos was banned in all types of products and applications due to its
carcinogenic nature, researchers worldwide has conducted extensive research and
development activities with the goal of identifying ...
Properties of chicken feather fiber/tyre dust hybrid composition filled recycled high density polyethylene composites
(Universiti Malaysia Perlis (UniMAP), 2014)
The composites of chicken feather fiber (CFF)/recycled high density polyethylene (RHDPE), tyre dust (TD)/recycled high density polyethylene (R-HDPE), and hybrid fillers composite between chicken feather fiber (CFF)/tyre ...
The effect of chicken feather fiber loading and chemical modification of recycled high density polyethylene/natural rubber/chicken feather fiber composites
(Universiti Malaysia Perlis (UniMAP), 2014)
Recycled high density polyethylene/ natural rubber/ chicken feather fiber
(RHDPE/NR/CFF) composites had been prepared using Brabender Plasticorder at
temperature 160˚C and rotor speed of 50 rpm. The effect of CFF content ...