Search
Now showing items 1-10 of 25
Characterization and properties of palm kernel shell filled low density polyethylene biocomposites
(Universiti Malaysia Perlis (UniMAP), 2011)
Biocomposites based on palm kernel shell (PKS) and low density polyethylene (LDPE) was investigated. The biocomposites were prepared by using Z-Blade mixer at processing temperature 180 oC and rotor speed 50 rpm. The effect ...
Rheological and thermal properties of palm kernel shell filled low density polyethylene composites
(Universiti Malaysia Perlis (UniMAP), 2013)
The palm kernel shell (PKS) filled low density polyethylene (LDPE) composites
were prepared by Z-blade mixer at temperature of 180 °C and rotor speed of 50 rpm.
The effects of PKS loading and different types of chemical ...
Preparation and characterization of modified polypropylene/ palm kernel shell (PP/PKS) biocomposites
(Universiti Malaysia Perlis (UniMAP), 2012)
The research on palm kernel shell (PKS) and polypropylene (PP) biocomposites consists of four parts. The first part is mainly to investigate the effect of incorporating PKS as filler on the mechanical, water absorption, ...
Tensile and thermal properties of coconut shell powder filled polylactic acid biocomposites
(Universiti Malaysia Perlis (UniMAP), 2012)
In this research the effect of coconut shell powder (CSP) content and chemical modification on mechanical properties, morphology and thermal properties of polylactic acid (PLA)/CSP biocomposites were studied. Coconut shell ...
Properties of low density polyethylene/natural Rubber/chemical modified water hyacinth fibers (Eichhornia crassipes) composites
(Universiti Malaysia Perlis, 2013)
The natural fiber composites of low density polyethylene (LDPE)/natural rubber
(NR)/water hyacinth fibers (WHF) were studied. The composites were prepared by using
Brabender Plasticorder at 160 oC with rotor speed of 50 ...
The effects of the electroless copper coating to the thermal expansion behaviors of silicon carbide particles reinforced copper matrix composites for the electronic packaging applications
(Universiti Malaysia Perlis (UniMAP), 2012)
The demands for advanced thermal management materials with high thermal
conductivity and low coefficient of thermal expansion (CTE) are expected to increase
due to the technological progress in the thermal management ...
Characterisation and properties of aluminium/zinc oxide composites as catalytic gases from depolymerisation of low density polyethylene to liquid oil
(Universiti Malaysia Perlis (UniMAP), 2012)
The effects of addition zinc oxide (ZnO) or magnesium trisilicate (MTS) in aluminum (Al)
matrix composites on physical and mechanical properties at different sintering temperature were studied. The Al/ZnO and Al/MTS ...
Development of a framework for the reduction of manufacturing defects in a composite material process
(Universiti Malaysia Perlis, 2008-08)
Reduction of defects is a critical issue in manufacturing operations. It goes without saying that defect reduction leads to manufacturing cost reduction, and this translates to increased profitability for the organization. ...
Characterization and properties of palm kernel shell reinforced polyester composites
(Universiti Malaysia Perlis, 2009)
Composites of unsaturated polyester (UP)/palm kernel shell (PKS) have been prepared by hand lay-up technique. The effect of filler loading of UP/PKS composites on mechanical properties and morphology were studied. Tensile ...
Characterization and mechanical properties of coconut shell filled acrylonitrile butadiene styrene / ethylene propylene diene monomer composites
(Universiti Malaysia Perlis, 2009)
Coconut shell filled ABS/EPDM composites were prepared using a Z-blade mixer at processing temperature 2000C and rotor speed 50rpm.Effect of chemical treatment,different composition of blend ratio , different filler loading ...