Search
Now showing items 1-10 of 32
Influence of H2 SO4 solution on formation of porous AAO thin film
(Universiti Malaysia Perlis, 2008-04)
The fabrication of self-ordered anodic aluminum oxide (AAO) by anodization of Al foils and pure aluminum in sulfuric acid solution was investigated. The influences of anodizing variables, such as applied voltage, the ...
Production of particle board from banana leaves
(Universiti Malaysia Perlis, 2008-06)
The method of agricultural waste disposal involving open burning which often to be used
by the banana plantations entrepreneur is unpractical where it is contribute to air pollution. Base on the situation above, this study ...
Effect of particle size and milling process on the microstructure and thermal properties of Copper Silicon Carbide (CuSiC) composites for electronic packing application
(Universiti Malaysia Perlis, 2008-03)
Shrinking size and increasing functionality of IC device has induced serious thermal problem. Good thermal dissipation, light weight and easy-to-process material, such as
CuSiC, is a highly potential heat spreader material ...
Agricultural residues as Precursors for activated carbon production (coconut waste)
(Universiti Malaysia Perlis, 2008-05)
Coconut meal and coconut shell were characterized to know the suitability to become the activated carbon precursors. Besides the low cost and decrease the market
waste, this attempt was made to produce an alternative ...
A study of using grass (Malaysian foxtail) fiber in paper making
(Universiti Malaysia Perlis, 2008-04)
A various types of grasses can be found in Malaysia. A few of grass can be used for animal food and as a covering the earth only. More than that, grasses always abandoned or fired. Foxtail grass, also known as ‘rumput bulu’ ...
The effect of sintering temperature on mechanical properties of natural and synthetic Hydroxyapatite with Alumina (1%) as an additive
(Universiti Malaysia Perlis, 2008-05)
A multi sintering temperature of hydroxyapatite (HA) will give an affect not only for the shape, composition and arrangement of the microstructure, but also to a high impact on mechanical properties of those samples. Natural ...
The process of electroplating in presence of Nickel Salts
(Universiti Malaysia Perlis, 2008-04)
Electroplating process has been carried out by utilising the Watt’s Bath without brighteners. Plots of weight change of electrodes versus current density shows that
weight loss of anodes and weight of deposits on cathodes ...
Agricultural residues as Precursors for activated carbon production (rice husk)
(Universiti Malaysia Perlis, 2008-04)
Rice husk because of low cost raw material and it activated form can be used as carbon precursor as a solution to reduce the agricultural waste. An effort was made to
produce an activated carbon precursor from the rice ...
Synthesis of Cordierite ceramic using solid state reaction technique
(Universiti Malaysia Perlis, 2008-04)
In this project work, cordierite/ indialite phase was synthesized from three different
ratios of powder mixture involved of kaolin, talc and alumina powder. The weight ratios
of powder mixtures used in this project were ...
Sintering atmosphere effect on Al-0.2Mg alloy
(Universiti Malaysia Perlis, 2008-04)
The effect of sintering atmosphere on mechanical properties and microstructure of Al-0.2Mg alloy were investigated. In this study, one type of parameter were used that was; different sintering atmosphere. Al and Mg were ...