DSpace
 

iRepository at Perpustakaan UniMAP >
The Library >
Conference Papers >

Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/8736

Title: Rapid prototyping of wood-based material
Authors: M. S., Wahab
A., Wagiman
N. M., Zuki
Keywords: Rapid prototyping;Rapid manufacturing;Additive manufacturing;Layer manufacturing;Malaysian Technical Universities Conference on Engineering and Technology (MUCEET)
Issue Date: 20-Jun-2009
Publisher: Universiti Malaysia Pahang
Citation: p.31-35
Series/Report no.: Proceedings of the Malaysian Technical Universities Conference on Engineering and Technology (MUCEET) 2009
Abstract: This paper presents initial development of wood-based composites with the aim to develop an alternative material at low cost for rapid prototyping process. Powder blends containing wood powder (90- 120μm) with commercial ZP102 as a plaster powder material from ZCorporation were mechanically blended to produce different composition of (vol.%) 25:70, 50:50 and 75:25 respectively. The blended material were successfully processed on 3D printers (Z406) which was used as a rapid prototyping machine to produce three-dimensional components and followed by post-treatment with ZMax solution to improve the mechanical properties. The mechanical properties, dimensional accuracy and surface quality of the build components were evaluated and the results were compared with the unfilled ZP102 material. The result shows that the mechanical properties were improved with the increasing of wood powder content up to 50 vol.%. However, dimensional accuracy and surface quality were decreased as the wood content increased. Further work on powder preparation is required in order to fully realize these performance benefits particularly for surface quality improvement.
Description: Malaysian Technical Universities Conference on Engineering and Technology organized by Universiti Malaysia Pahang in collaboration with Universiti Tun Hussein Onn Malaysia, Universiti Teknikal Malaysia Melaka & Universiti Malaysia Perlis on June 20th - 22nd, 2009, at MS Garden Hotel, Kuantan, Pahang, Malaysia.
URI: http://hdl.handle.net/123456789/8736
Appears in Collections:Conference Papers

Files in This Item:

File Description SizeFormat
031-035.pdfAccess is limited to UniMAP community19.72 MBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! Perpustakaan Tuanku syed Faizuddin Putra, Kampus Pauh Putra, Universiti Malaysia Perlis, 02600, Arau Perlis
TEL: +604-9885420 | FAX: +604-9885405 | EMAIL: rujukan@unimap.edu.my Feedback