DSpace
 

iRepository at Perpustakaan UniMAP >
The Library >
Conference Papers >

Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/8690

Title: Effects of hole taper on high speed steel workpiece using EDM injection flushing
Authors: M. S., Reza
Nor Farhanah
S. H., Tomadi
M. A., Hassan
W. S. W., Harun
M. A., Azmir
Z., Hamedon
Keywords: EDM;Injection flushing;Hole taper;High speed steel;Copper electrode;Malaysian Technical Universities Conference on Engineering and Technology (MUCEET)
Issue Date: 20-Jun-2009
Publisher: Universiti Malaysia Pahang
Citation: p.1-5
Series/Report no.: Proceedings of the Malaysian Technical Universities Conference on Engineering and Technology (MUCEET) 2009
Abstract: Electrical Discharge Machining (EDM) is a controlled metal-removal process used to remove metal by means of electrical spark erosion. The objective of this paper is to determine the effects of injection flushing on the angle taper of a workpiece. One of the most important factors in a successful EDM operation is the removal particles from the working gap. Flushing these particles out of the gap between the workpiece and electrode are very important to prevent them from forming bridges that cause short circuits. Secondary discharge occurs easily on the hole’s side wall workpiece when using injection flushing. The secondary discharge will cause the hole taper because of small diameter hole and depth of machining. This study develops the EDM injection flushing on the hole taper of high speed steel (HSS) M35. Machining parameters are constant while the pressure flushing varies from 0.03 MPa to 0.15 MPa. Copper electrode with kerosene dielectric fluid was used to machine the high speed steel M35. The effects of hole taper by using injection flushing was being analyzed and discussed. Injection flushing pressure found at most 0° angle of taper occurs between 0.07 MPa.
Description: Malaysian Technical Universities Conference on Engineering and Technology organized by Universiti Malaysia Pahang in collaboration with Universiti Tun Hussein Onn Malaysia, Universiti Teknikal Malaysia Melaka & Universiti Malaysia Perlis on June 20th - 22nd, 2009, at MS Garden Hotel, Kuantan, Pahang, Malaysia.
URI: http://hdl.handle.net/123456789/8690
Appears in Collections:Conference Papers

Files in This Item:

File Description SizeFormat
333-337.pdfAccess is limited to UniMAP community141.79 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! Perpustakaan Tuanku syed Faizuddin Putra, Kampus Pauh Putra, Universiti Malaysia Perlis, 02600, Arau Perlis
TEL: +604-9885420 | FAX: +604-9885405 | EMAIL: rujukan@unimap.edu.my Feedback