DSpace
 

iRepository at Perpustakaan UniMAP >
The Library >
Conference Papers >

Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/dspace/handle/123456789/8688

Title: Comparison of product data model between Rapid Prototyping and CNC milling 3-axis
Authors: Y., Yusof
M. F., Hushim
M. A., Mamat
Keywords: Product Data Model;CNC;Rapid Prototyping;Malaysian Technical Universities Conference on Engineering and Technology (MUCEET)
Issue Date: 20-Jun-2009
Publisher: Universiti Malaysia Pahang
Citation: p.1-6
Series/Report no.: Proceedings of the Malaysian Technical Universities Conference on Engineering and Technology (MUCEET) 2009
Abstract: Nowadays, there are high demands on products with high accuracy and quality, this is due to the development of new technology on machinery and computer software. This research has been done to compare the product data model by using CNC 3-axis and Rapid Prototyping to produce a model spanner. The format files that use consists of STL, IGES, VRML, VDAFS, STEP AP214, STEP AP203 and PRO E. The main purpose of this study was to find loss of data for each format file was design through Solidwork’s software. The format file has been simulating to generate tool path by using MasterCam software before machining process will be done. Using that simulation, be able to compare a quality of machining result from surface finishing aspect and machining time for each format file. As a result, only format file VDAFS a suitable for machining CNC 3-axis because that format file contain less of data loss when compared with other format file from surface roughness aspects and defect. While for RP, format files VRML a suitable for machining than STL, because file VRML does not committed to any data losses from aspects of color. Finally, these views provide a concrete guideline for choosing a suitable format file for machining CNC and RP to produce a product required.
Description: Malaysian Technical Universities Conference on Engineering and Technology organized by Universiti Malaysia Pahang in collaboration with Universiti Tun Hussein Onn Malaysia, Universiti Teknikal Malaysia Melaka & Universiti Malaysia Perlis on June 20th - 22nd, 2009, at MS Garden Hotel, Kuantan, Pahang, Malaysia.
URI: http://hdl.handle.net/123456789/8688
Appears in Collections:Conference Papers

Files in This Item:

File Description SizeFormat
284-289.pdfAccess is limited to UniMAP community616.55 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! Perpustakaan Tuanku syed Faizuddin Putra, Kampus Pauh Putra, Universiti Malaysia Perlis, 02600, Arau Perlis
TEL: +604-9885420 | FAX: +604-9885405 | EMAIL: rujukan@unimap.edu.my Feedback