DSpace
 

iRepository at Perpustakaan UniMAP >
The Library >
Conference Papers >

Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/7514

Title: Determination of plane strain fracture toughness for AZ61 Magnesium alloy
Authors: M. A. M., Daud
Mohd. Zaidi, Omar
Syarif Junaidi, S Djalil
Zainuddin, Sajuri
???metadata.dc.contributor.url???: ahadlin@eng.ukm.my
Keywords: Stress intensity factor;Fracture toughness;Thickness;Shear lips;Magnesium alloys;Alloys;Strains and stresses
Issue Date: 1-Dec-2009
Publisher: Universiti Malaysia Perlis
Citation: p.1-5
Series/Report no.: Proceedings of the Malaysian Metallurgical Conference '09 (MMC'09)
Abstract: A stress intensity factor K was used as a fracture parameter to determine the true material property, i.e. plane strain fracture toughness KIC of AZ61 magnesium alloy using a single edge notch bend (SENB) specimen in accordance to ASTM E399 testing method. Five different specimen thicknesses of 2 to 10 mm were used in the test. A sharp fatigue pre-crack was initiated and propagated to half of specimen width at a constant crack propagation rate of about 1 x 10-8 m/cycle before the specimen was loaded in tension until the fracture stress is reached and then rapid fracture occurred. The fracture toughness KC values obtained for different thicknesses showed that KC value decreased with increasing specimen thickness. The highest KC value obtained was 16.5 MPa√m for 2 mm thickness specimen. The value of KC became relatively constant at about 13 MPa√m when the specimen thickness exceeds 8 mm. This value was then considered as the plane strain fracture toughness KIC of AZ61 magnesium alloy. Calculation of the minimum thickness requirement for plane strain condition and the size of the shear lips of the fracture surface validate the obtained KIC value.
Description: Organized by School of Materials Engineering & Sustainable Engineering Research Cluster, 1st - 2nd December 2009 at Putra Brasmana Hotel, Kuala Perlis, Perlis.
URI: http://hdl.handle.net/123456789/7514
Appears in Collections:Conference Papers

Files in This Item:

File Description SizeFormat
Determination of plane strain fracture.pdfAccess is limited to UniMAP community.245.66 kBAdobe PDFView/Open
Abstract.pdf47.44 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! Perpustakaan Tuanku syed Faizuddin Putra, Kampus Pauh Putra, Universiti Malaysia Perlis, 02600, Arau Perlis
TEL: +604-9885420 | FAX: +604-9885405 | EMAIL: rujukan@unimap.edu.my Feedback