DSpace
 

iRepository at Perpustakaan UniMAP >
The Library >
Conference Papers >

Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/xmlui/handle/123456789/7487

Title: The influence of variation milling time into mechanical properties for 5% SiC reinforced P/M 5082 develop by using Powder Metallurgy technique
Authors: Ade, Firdianto
Darwin, Sebayang
Shahruddin, Mahzan
Nozie, Abdullah
Noashida, Arsat
A.E.B., Ismail
???metadata.dc.contributor.url???: darwin@uthm.edu.my
Keywords: Metal Matrix Composites;Density;Hardness;Porosity;Microstructure;Composites;Materials engineering;Powder metallurgy
Issue Date: 1-Dec-2009
Publisher: Universiti Malaysia Perlis
Citation: p.1-5
Series/Report no.: Proceedings of the Malaysian Metallurgical Conference '09 (MMC'09)
Abstract: The importance of Al and SiC composite materials are recognized due to a low production cost and as material with vast availability on earth. Composite materials were developed as an alternative material with give a high stiffness properties (high strength and low density) and its own a special interest for the application in the aerospace and aeronautical industries. An experimental work has been carried out to investigate the influence of variation milling time aluminum (Al) 5082 with 5% silicon carbide (SiC) metal matrix composites with respect to the density, hardness, porosity, microstructure and composition of Al-SiC. The starting materials were SiC with particle size of 90 µm and Al powder with particle size 45 µm. Al-SiC powder was mixtured with content of 95% aluminum (Al) and 5% SiC under process with three milling times of 1, 24 and 48 hours respectively. Powder compactness proceeded under a pressurized condition of 20 tons. The experimental work used Micromeritics (mercury porosimeter) for porosity measurement. Scanning Electron Microscope (SEM) for microstructure investigation while Energy Dispersive X-ray Spectroscopy (EDX) is used to analyze the composition of composites material. This paper shows the result of measurements over density, micro hardness, porosity and microstructure of three specimens under investigation for different time millings. The results indicates that the properties of the specimen with 24 hours milled give a better properties then other milling times.
Description: Organized by School of Materials Engineering & Sustainable Engineering Research Cluster, 1st - 2nd December 2009 at Putra Brasmana Hotel, Kuala Perlis, Perlis.
URI: http://hdl.handle.net/123456789/7487
Appears in Collections:Conference Papers

Files in This Item:

File Description SizeFormat
The influence of variation milling time.pdfAccess is limited to UniMAP community.379.92 kBAdobe PDFView/Open
Abstract.pdf7.5 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! Perpustakaan Tuanku syed Faizuddin Putra, Kampus Pauh Putra, Universiti Malaysia Perlis, 02600, Arau Perlis
TEL: +604-9885420 | FAX: +604-9885405 | EMAIL: rujukan@unimap.edu.my Feedback