|
iRepository at Perpustakaan UniMAP >
UNIVERSITY LIBRARY >
Conference Papers >
Please use this identifier to cite or link to this item:
http://hdl.handle.net/123456789/7133
|
| Title: | Design and fabricate Mosfet Masks at KUKUM Microfabrication Cleanroom for teaching undergraduates |
| Authors: | Mohd Zainizan, Sahdan
Uda, Hashim
Hashim, Saim
Marlia, Morsin |
| Keywords: | Mask fabrication
Pattern transfer
Photolithography
AutoCAD
MOSFET
Mask -- Design and construction |
| Issue Date: | 18-May-2005 |
| Publisher: | Kolej Universiti Kejuruteraan Utara Malaysia |
| Citation: | p.53-57 |
| Series/Report no.: | Proceeding sof the 1st National Conference on Electronic Design |
| Abstract: | In teaching undergraduates program in
MOSFET fabrication, mask set is one of the major problem since the cost is extensively high. The purpose of these masks is to define certain region on a wafer. In this work, a low cost mask set is fabricated with a simple technology. An economical solution of mask sets using transparency films
with various channel lengths from 250um to 20 um was produced. Four mask sets of MOSFET were designed using AutoCAD 2002 drawing tools and then printed on the transparency film. Contact printing method was utilized to
transfer the mask layouts onto a 4-inch silicon wafer using standard photolithography techniques to check the line
uniformity. This task was done in KUKUM Microfabrication Cleanroom. The detail flow of mask making and the resist pattern on the wafer are also presented in this paper. Optical observation shows that the mask layouts were successfully transferred onto photoresist with minimum variation. Our
mask sets were really cost effective and practical for teaching undergraduates purposes. |
| Description: | Organized by Kolej Universiti Kejuruteraan Utara Malaysia (KUKUM), 18th - 19th May 2005 at Putra Palace Hotel, Kangar. |
| URI: | http://hdl.handle.net/123456789/7133 |
| Appears in Collections: | Uda Hashim, Prof. Dr.
Conference Papers
|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
|
