DSpace
 

iRepository at Perpustakaan UniMAP >
Journal Articles >
School of Manufacturing Engineering (Articles) >

Please use this identifier to cite or link to this item: http://dspace.unimap.edu.my:80/dspace/handle/123456789/21913

Title: The study of surface roughness and MRR of mild steel using manual plasma arc cutting machining
Authors: Rajamony, Bhuvenesh, Assoc. Prof. Dr.
Mohd Hafidz, Norizaman
Muhamad Saifuldin, Abdul Manan
???metadata.dc.contributor.url???: bhuvenesh@unimap.edu.my
m.saifuldin@unimap.edu.my
hafidznorizaman@gmail.com
Keywords: Material removal rate;Manual plasma arc cutting;Surface roughness;Taguchi method
Issue Date: 2012
Publisher: Trans Tech Publications
Citation: Advanced Materials Research, vol. 576, 2012, pages 3-6
Abstract: Manufacturing companies define the qualities of thermal removing process based on the dimension and physical appearance of the cutting material surface. Therefore, the roughness of the surface area of the cutting material and the rate of the material being removed during the manual plasma arc cutting process was importantly considered. Plasma arc cutter Selco Genesis 90 was used to cut the specimens made from Standard AISI 1017 Steel manually based on the selected parameters setting. Two different thicknesses of specimens with 3mm and 6mm were used. The material removal rate (MRR) was measured by determining the weight of the specimens before and after the cutting process. The surface roughness (SR) analysis was conducted to determine the average roughness (Ra) value. Taguchi method was utilized as an experimental layout to obtain MRR and Ra values. The results reveal that for the case of manual plasma arc cutting machining, the SR values are inversely proportional to the MRR values. The quality of the surface roughness depends on the dross peak that occurred during the cutting process.
Description: Link to publisher's homepage at www.ttp.net/
URI: http://www.scientific.net/AMR.576.3
http://hdl.handle.net/123456789/21913
ISSN: 1662-8985
Appears in Collections:Bhuvenesh Rajamony, Prof. Dr.
School of Manufacturing Engineering (Articles)

Files in This Item:

File Description SizeFormat
Document1.pdf39.66 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! Perpustakaan Tuanku syed Faizuddin Putra, Kampus Pauh Putra, Universiti Malaysia Perlis, 02600, Arau Perlis
TEL: +604-9885420 | FAX: +604-9885405 | EMAIL: rujukan@unimap.edu.my Feedback