|
iRepository at Perpustakaan UniMAP >
FINAL YEAR PROJECTS >
School of Mechatronic Engineering (FYP) >
Please use this identifier to cite or link to this item:
http://hdl.handle.net/123456789/18854
|
| Title: | Design and analysis of a shell and tube heat exchanger (one shell pass and one tube pass) |
| Authors: | Chua, Wai Hoong |
| Advisors: | Dr. Ir. Merdang Sembiring |
| Keywords: | Shell
Tube heat exchanger
Diesel Engine |
| Issue Date: | Apr-2009 |
| Publisher: | Universiti Malaysia Perlis (UniMAP) |
| Department: | School of Mechatronic Engineering |
| Abstract: | A shell and tube heat exchanger (one shell pass and one tube pass) is a heat
exchange device between hot fluid and cold fluid. It is used widely in process industry
for cooling, heating and heat exchange stream in intercooler and reactor charge heater.
In this project, a model will be designed to remove heat of exhaust gases from a Diesel
Engine (Compression-Ignition). The hot exhaust gas is hot fluid and water is cold fluid.
Several experiments are conducted in laboratory. Initially, experiments are conducted on
the Diesel Engine to find out the range of exhaust gas temperatures and the amount of
cooling water as well. These data served as a guideline for selecting the operating
parameters for the design of suitable heat exchanger. In addition, an analysis of heat
exchanger behavior is made using Solidworks and EFD lab software. The analysis will
develop an awareness of fouling surfaces for heat exchanger. By using EFD lab
software, the model simulation can be predicted before fabrication. The model may be
use as commercialization product for daily application such as making hot beverages. |
| URI: | http://hdl.handle.net/123456789/18854 |
| Appears in Collections: | School of Mechatronic Engineering (FYP)
|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.
|
